Old part #IF105
SGD0.00 - SGD345.00
There are 9140 products.
Preglued USA-1 tire and wheel set. Includes 2pcs
Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Carbon AMB Holder for the MP9/MP10. made from precision high quality carbon material.
Can be mounted on the FAZER Mk2 series FZ02L-BT / FZ02L VE-BT chassis.
Body accessory parts with plated finish improve scale realism for body shell, protector parts protect the roof when turn over, polycarbonate rear spoiler, decals and masking sheets used for the ready set. Comes with decoration decals for customized body shell you wish. The LED light unit series (#97054) sold separately can be installed in the light buckets.
Finished body size: Approximately 378x154x135mm (excluding mirrors)
Spare center front universal swing shaft for the USA-1. Compatible with the Mad Crusher / FO-XX series.
Spare Bumper/Body mount set for the USA-1 series. Compatible with the Mad Crusher / FO-XX series.
Spare part for the Mad Van VE. It can be used on the standard Mad Van(34412T1) as an option. Durable sintered metal materila.
Sintered 76T Spur gear for the Mad Van VE. Good optional part for the Mad Van.
Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).
Speed controller for 60A waterproof sensorless brushless motor. Cooling fan helps to protect the ESC from overheat and supply stable power. Input voltage : 2-3S LiPo (7.4-11.1V) or 6-9S NiMH battery (7.2-10.8V). Size : 48.5x38x32mm (including cooling fan) / Continuous maximum current : 60A / Peak current : 390A / Weight : 90g / Bec output : 6V/3A
Sensorless brushless motor 4000kv (shaft diameter : 3.175mm) for 2S LiPo. The main body has a dustproof structure to avoid maintenance. Suitable for 1/10 On and Off-road cars. Weight : 205g
Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.
Spare 3pcs flywheel for the Inferno NEO / NEO ST / GT2
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Carbon center bulk plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.
22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.
Roll damper for R246-2351 MML Motor Mount. Oil damper is sold separately. Compatible dampers: R246-1360, R246-1221, and MZW432.
Aluminum MM2 type motor mount.
- Precision lightweight design achieves less than 7g in weight while maintaining sufficient rigidity
- Compatible with R246-1362 roll damper as well as MZ217 standard plastic one
Roll damper for R246-1361 and MZ217 MM2 Motor Mount.
- Blue anodized precision machined aluminum with shiny finished edges
- Recommended using with R246-1360 oil damper
- Can be assembled in L, LL and 3L wheelbases
Newly developed V2 oil damper.
- Blue anodized cap combined with gunmetal anodized body with laser etched Route 246 logo
- Greatly reduced bounce force with thin rubber diaphragm and thin shock shaft
Handy multiuse case with a MINI-Z logo.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Dimensions: approx. 201 x 108 x 52mm
Maximum MINI-Z size: approx. 187 x 95 x 48mm
Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.
Optional parts for INFERNO MP10e. Battery spacer for short LiPo batteries.
It is getting popular to use the shorty LiPo batteries to 1/8 EP Buggy due to the improved performance. The battery can be changed the installing position in the battery holder to adjust a center of gravity and balance as well as making weight reduction. That are advantage to use with the shorty LiPo battery. When use the shorty battery to MP10e, it has same effect for car. It can also be used with vintage Scorpion, Beetle and Fazer series.
Spare parts for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 / can also be used for other 1/8 buggy.
■Modulation System FHSS telemetry system
■Size Transmitter：W105mm x L175mm x H230mm
Receiver：W37.9mm x L22.5mm x H13mm
■Weight Transmitter：390g / Receiver：5.7g
■ESC Power Source 2-3S Li-Po/5-9cellNi-Mh
■ESC Continuous current 60A
Spare part for MINI-Z RWD series & FWD series.
Features steering / throttle trim as well as dual rate adjustment of steering angle
and control the flashing speed of optional LEDs.
The sponge grip of the steering wheel provides comfortable fit for precision control feel.
In addition, the transmitter has a Training Mode feature which limits speed
of the car for easy learning.
(default setting at the time of shipment is Training Mode)
■ Number of channels 4 channels
■ Weight 398g
■ Power supply 4 AA alkaline batteries
■ Compatible model Car & boat
■ RF range 2.405-2.475GHz
■ 2.4GHz system FHS (MINI-Z) / FHSS 1Way (KR-331) / FHSS 2Way (KR-431T)
■ Low voltage warning 3.7V or less
■ Steering range 66 ° (45 ° left and right)
■ Throttle range 45 ° (front and rear angle 30 °)
■ Certification CE0678.FCC
Front shock stay (5.0mm thick) for the INFERNO NEO 3.0 Readyset
Front shock stay (5.0mm thick) for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 Readyset
Spare parts for the MAD CRUSHER / FO-XX. Included Front Housing parts and screws as 1 set. Not compatible with MA002, MA004F and MA331.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004F. Cannot be used with MA002. Must use together with MA353 and MA354.
Machined brass front hub. Increases the weight distribution on the front wheels for improved uphill performance.
Metal universal joint. Durable metal components efficiently convey power under high load condition.
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.