There are 76 products.
KP30216 BSx4S-one10 Grasper2
[Specifications]
#Torque: 16.0Kg-cm Speed: 0.09sec/60deg(@7.4V)
#Torque: 12.1Kg-cm Speed: 0.11sec/60deg(@6.0V)
#Dimensions: 40.5×26×21mm (Low Profile)
#Weight: 51.0g
#Operating voltage: 6.0~7.4V (Lipo,Life,Ni-MH)
#Brush-less motor
#Hard alumite aluminum gear
#Dual ball bearings
#Hard servo gear shaft
#Aluminum top case
#Aluminum heat sink middle case
#Black cable
#Gold plated connector
#Serial Compatible
#HCS Compatible
#Recommend category
1/10 EP on road, 1/10 EP Off road, 1/10 GP On road.
Made in Japan.
KP10662 EX-NEXT w/KR-420XT...
<Includes Serial compatible receiverKR-420XT>
[Specficatios]
●Dimensions:240.5×163.0×107.2mm(Does not include protrusions)
●Weight: 551g(battery not included )
●Power supply: AAA size dry battery,Ni-MH battery x4 (sold separately)
Li-Fe battery(2cell 6.6V)(sold separately)
Li-Po battery(2cell 7.4V)(sold separately)
●Current: 200mA or less
●Channel:PWM 4ch/ Serial 8ID
*Maximum setting ID number of serial are different by each products.
●Frequency: 2.4GHz
●Radio Mode: XT
●Model memory 50
●Compatible receiver: KR-420XT
KP10664 EX-NEXT...
<Includes Serial compatible receiverKR-420XT>
[Specficatios]
●Dimensions:240.5×163.0×107.2mm(Does not include protrusions)
●Weight: 551g(battery not included )
●Power supply: AAA size dry battery,Ni-MH battery x4 (sold separately)
Li-Fe battery(2cell 6.6V)(sold separately)
Li-Po battery(2cell 7.4V)(sold separately)
●Current: 200mA or less
●Channel:PWM 4ch/ Serial 8ID
*Maximum setting ID number of serial are different by each products.
●Frequency: 2.4GHz
●Radio Mode: XT
●Model memory 50
●Compatible receiver: KR-420XT
KP30121 RSx3-Response H.C
[Specifications]
<Speed type servo>
#Torque:17.6Kg-cm Speed: 0.06sec/60deg(@7.4V)
#Torque:14.5Kg-cm Speed: 0.07sec/60deg(@6.0V)
#Dimensions: 41x37.5x20mm(Standard size)
#Weight: 69.9g
#Operating voltage:6.0 to 7.4V(Lipo,Life,Ni-MH)
#The hard alumite aluminum gear
#Core-less motor
#Dual ball bearings
#The hard servo gear shaft
#The aluminum top case
#The aluminum heat shink middle case
#Gold plated connector
#Black cable
#HCS Compatible
#Recommend category
1/8 Off road, 1/8 On road.
Madein Japan.
KP21011 KR-418FH 2.4GHz...
[Specifications]
#Dimensions: 28 x 18.3x 18.5mm
#Weight: 7.5g
#Operating Voltage: 4.8 to 7.4V
#Frequency:2.4GHz(FHSS)
#Number of channels: 4ch
#Black Shield Wire antenna
#Gold Plated header pins
#HCS compatible
#Compatible models
Master unit EX-RR (KIY), Master unit EX-1 (KIY), Master unit EX-2(KIY),Esprit4,EX-5FH,RF-904FH,RF-903FH
Made in Japan.
KP80641 EX-RR ST2 w/ KR-418FH
New Steering Unit ST2
Expert Grip2
Latest version software Ver2.12
HCS compatible Receiver KR-418FH
#Dimensions:230×163×107mm
#Weight:536g (not included battery)
#Battery: RO3/AAA/UM4 battery x 4
#Current: 150mA
#Using time: 4 or 5 hours( with alkaline battery)
#Channels:4 channels
#Frequency:2.4GHz(FHSS)
# Model memory: 35
#HCS compatible receiver KR-418FH(21011) included.
#*This products does not include the Manual in the package.Please download manual from here.
#Other Compatible receivers: KR-415FHD,KR-413FH,KR-241FH,KR-211FH,KR-212FHG.
*If you use Li-fe, Li-po, you must use with our option unit (Battery stand Unit).
KP80657 EX-2 ST2 w/KR-241FH
EX-2 with Drop Extension Steering Unit2(ST2)
[Specifications]
#Dimensions: 240×163×107mm
#Weight: 528g ( Not included battery)
#Current: 150mA RO3/AAA/UM4 battery x 4
#Using time: 6hours ( It may change by a kind of battery in use.)
#40 Model Memories.
#Micro receiver KR-211FH included.
#Other Compatible receivers: KR-418FH,KR-415FHD,KR-413FH,KR-241FH,KR-211FH,KR-212FHG.
*This products does not include the Manual in the package. Please download manual from here. (Manual is same as EX-RR ver2.0 software. But Grip Unit is different at EX-RR and EX-2, please attention this difference.)
Made in Japan.