32338FRS MINI-Z RWD readyset Mercedes-AMG GT3 No.47 24H Nurburgring 2018
■ Overall length 177mm
■ Overall width 78mm
■ Overall height 47.5mm
■ Overall weight 130g
■ Wheel base 98mm (LL)
■ Tread F: 67.5mm R: 65.0mm
■ Used chassis RWD (MR-03)
■ Motor mount MM
■ Front wheel offset narrow + 3.0mm (for RWD)
■ Rear wheel offset wide + 3.0mm (for RWD)
■ Used radio Syncro KT-531P
<Ready set contents>
● Factory completed chassis
● Painting / marking Factory completed plastic body
● Syncro KT-531P 2.4GHz transmitter
● Front tread change parts set
● Adjustment front suspension spacer
● 6T / 7T / 8T / 9T pinion gear
● Wheel Wrench
● Pinion removal tool
● Spare wheel nut
● Pairing stick
● Tires and wheels included
<Necessary items for driving>
● 4 AAA alkaline or nickel-metal hydride batteries for driving
● 4 AAA alkaline batteries for transmitter
The MINI-Z RWD series combines a rear-drive chassis with a focus on driving and a Syncro KT-531P transmitter.
A MINI-Z racer that is completely established as an R / C model that anyone can easily start by just preparing eight AAA batteries. Among them, under the concept of "to make it easier for a wider range of users to enjoy", the Syncro KT-531P transmitter and a body full of scale that realistically reproduces popular models are included in the set. Is the "Minute RWD series". In addition to steering trim and throttle trim, the Syncro KT-531P transmitter is equipped with dual rate and LED control functions, and a sponge is standard equipment on the steering wheel to emphasize fit during control. In addition, a factory-completed body that fills the joy of decorating with a finish similar to that of a display model is also included. Since the chassis follows the proven MR-03, not only driving performance but also durability and reliability are included. Furthermore, by adopting a new board with a redesigned control program in line with the adoption of the Syncro KT-531P transmitter, linear handling with respect to steering is realized, and an optional gyro unit (MZW446 / sold separately) is installed. The behavior when it is done is also a more controllable characteristic. Since it is the best package for "the first R / C car", why not start your R / C life from this series?
* Since the Syncro KT-531P transmitter uses FHSS 2.4GHz, it is not compatible with the conventional ASF / MHS / FHS 2.4GHz system.
● Minute RWD series with Syncro KT-531P transmitter that can be set in various ways.
● The steering feel is dramatically improved by adopting a new board with a redesigned control program in line with the adoption of the Syncro KT-531P transmitter.
-The factory-completed body has a high-scale finish comparable to the display model.
● Full bearing specifications that adopted a total of 7 ball bearings, which was an option in the past.
● All MINI-Z Racer bodies can be installed. * A separate motor case and differential gear assembly corresponding to the mounting body are required.
● Adopts an original front suspension "VCS" that brings out the optimum camber change according to the suspension stroke.
● Optional gyro unit (MZW446) can be installed. The gyro unit can be adjusted by adjusting the volume installed on the vehicle body (* When using the separately sold KT-432PT transmitter, it can be adjusted by the transmitter).
● Optional LED light unit Clear & Red (MZW429R) can be installed.
Developed by Germany's prestigious Mercedes-Benz, it models the machine entered by the HTP Motorsports team in the 2018 Nürburgring 24 Hours. You can enjoy the powerful form of the long nose and aero parts.
Includes Syncro KT-531P transmitter with stylish design. In addition to steering / throttle trim, it is also equipped with dual rate and LED control functions that can adjust the amount of steering angle. It is also possible to set a training mode that suppresses the vehicle speed (the factory setting is set to training mode).
Since the chassis follows the proven MR-03, it is possible to install a wide variety of MR-03 chassis parts and a gyro unit (MZW446) that enhances controllability.
Both narrow and wide treads can be changed by exchanging the front lower and upper plates and steering tie rods. In addition, it is possible to change the wheelbase according to the vehicle model (* Optional parts sold separately are required to change).
With optional parts for MR-03, which boasts an abundant lineup, it is possible to step up according to your budget and level.