Optional parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Spare parts for MR-04 EVO2

Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.

Spare parts for FAZER RAGE 2.0

Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. (Includes silicon oil)

* This product is not compatible with the MM2 motor case

Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.

Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.

Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.

A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.

4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.  

A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.

Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.

Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.

Durable diff shafts.

Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.

Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.

Spare parts for the IFW615.

Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

New 1 degree hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.

Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.

FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.

※You need to purchase two to make one unit.

Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2

Optional parts for FAZER FZ02-R.

※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.

Spare parts for MR-04 EVO2

Spare part for INFERNO MP10 TKI3.

Spare part for INFERNO MP10 TKI3

Optional parts for the FAZER MK2

Option parts for MINI-Z 4×4

Spare parts for FAZER MAD VAN series and RAGE 2.0

Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.

22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.

INFERNO MP10 TKI2 Spare parts

4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets. 

Front shock spring (70mm) for INFERNO MP10/MP9

Rear shock spring (81mm) for INFERNO MP10/MP9

Spare parts for 1/10 Turing cars

Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.

Spare parts for the IFW614.

CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

Durable hard front hub carrier set. 17.5 degrees

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40

Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.

Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.

<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2

Spare parts for MR-04 EVO2

Spare parts for FAZER MK2

Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks

Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.

INFERNO MP10 TKI2 Spare parts

A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.

Front shock spring (70mm) for INFERNO MP10/MP9

Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.

Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.

CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis

New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.

Reciver unit for the MINI-Z EVO chassis. 
Supports the KT-531 and KT432PT transmitters.

Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.

Optional parts for the INFERNO MP10/MP9e Evo. 
New setting weights by 10g and 20g which can be installed the main chassis. 
Can be adjusted the weights in 10g/20g/30g/40g by weights combination. 
Fixing by screws and nylon nut which prevents falling off when driving.

A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.

- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm

Reduces the weight of chassis by using lightweight titanium rods. 
Improves steering response and suspension movement.  Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.

Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.

Spare parts for MP10
Front and rear lower suspension arms have been significantly reinforced for greater strength and also designed so they don’t catch dirt for easier cleaning and maintenance. The new arms are also substantially thicker around the large diameter φ4.5mm hinge pins to make the arms even more resilient.

Optional parts for FAZER Mk2 FZ02-R

Optional parts for FAZER Mk2 FZ02-R.

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40

Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.