There are 282 products.
Active filters
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Spare parts for MP10
High strength and precision construction of molded rear hub delivers improved controllability and better handling char
Spare parts for MP10
At first glance the radio plate looks similar to the MP9 TKI4, but the MP10 design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm.
Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
FRP main chassi and carbon front upper plate. More rigid flex allows more responsive steering.
Carbon upper deck. More rigid than the FRP version allowing less flex and roll. Great for high traction surface.
Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. (Includes silicon oil)
* This product is not compatible with the MM2 motor case
Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.
Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
CNC machined front shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.
CNC machined rear shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.
Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.
Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.
Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.
Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
New 1 degree hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Ride height adjustment spacers for the Fantom EP 4WD and EXT. Can be installed in the front and rear between the axle mount and chassis. Allows 2 different(0.5mm / 1.0mm) lower positions.
Spare parts for FAZER MAD VAN series and RAGE 2.0
Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.
22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.
Optional parts for the FANTOM EP 4WD. By replacing 6x15x5mm bearing for wheel shaft with 2pcs 6x10x3mm bearings, reduces shaft vibration and friction loss. Gold anodized finish Bearing Holder. 2 sets included.
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Durable hard front hub carrier set. 17.5 degrees
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.
Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.
<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
