There are 241 products.
Active filters
MZW429R-01 Forked connector...
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
Price
SGD16.30
IFW623 HD Front Shock...
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
SGD101.87
IFW624 HD Rear Shock...
Optional parts for INFERNO MP10. Rear Shock Stay for IS215 Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
SGD112.06
MXTH002HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Price
SGD44.82
MXW001R Aluminum Link Rod...
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Price
SGD40.75
NTW006 11mm Suspension...
11mm suspension balls made with high quality material. Increases efcient and reliable suspension movement.
Price
SGD16.30
IFW619 Drive Bevel Gear...
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
Price
SGD38.71
IFW618 Ring Gear (42T/MP10)
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
Price
SGD65.20
NTW004 1/8 Wheel Stopper Set
New aluminum hex hub for 17mm wheels. CNC machined aluminum hubs compatible with variety of wheels in the market.
Price
SGD40.75
IS205H Rear Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
SGD28.52
IS204H Front Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
SGD24.45
IFW615 HD Cap C-Universal...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
SGD48.90
IFW613B HD Cap U-Swing...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
SGD97.78
NTW005 Bumper ＆ Body Mount Set
Optional front bumper and body mount improves durability. Great for bashing purposes. Requires body triming for 33101.
Price
SGD12.22
IFW612B L/Weight Long Shock...
New Light weight long shock bushings sets the shock 3mm to the rear. This angle on the rear shocks improves the shock movement performance drastically and increases traction.
Price
SGD24.45
IFW611-0 Brass Front Hab...
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Price
SGD28.52
IFW610 Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
SGD28.52
IFW605-20 Rear Chassis...
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Price
SGD44.82
IFW605-10 Rear Chassis...
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Price
SGD40.75
IFW604-20 Front Chassis...
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Price
SGD44.82
IFW603 3PC Clutch Set...
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
Price
SGD138.54
IFW601C Titanium Rod Set...
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
Price
SGD224.11