There are 254 products.
Active filters
IF624-69 HD Sus. Shaft...
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Price
SGD14.26
IF613HC Hard Rear Hub...
Spare parts for MP10
High strength and precision construction of molded rear hub delivers improved controllability and better handling char
Price
SGD32.00
IF602 Radio Plate...
Spare parts for MP10
At first glance the radio plate looks similar to the MP9 TKI4, but the MP10 design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm.
Price
SGD36.67
EFW011 Main Chassis w/CF...
FRP main chassi and carbon front upper plate. More rigid flex allows more responsive steering.
Price
SGD109.00
EFW010 Carbon Upper...
Carbon upper deck. More rigid than the FRP version allowing less flex and roll. Great for high traction surface.
Price
SGD92.85
OTH248YB 2.2 Dish...
2.2 inch rear wheel with offset suitable for vintage buggy chassis.
Used when using 2.2 inch tires.
38mm width.
<Compatible chassis> *2.2 inch tires are required for each vehicle.
No.30617 Optima
No.30618 Javelin
No.30619 Turbo Optima
No.30622 Optima Mid
No.30625 Ultima
Price
SGD18.33
MXW004 Brass Rear Axle Cap
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
Price
SGD30.28
IFW634-47S Light Weight...
Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.
Price
SGD64.59
IFW632 Carbon Rear Shock...
Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.
Price
SGD138.54
EFW001G Wing(Gold/FANTOM...
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
Price
SGD24.45
MZW429R-01 Forked connector...
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
Price
SGD16.30
MXTH002HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Price
SGD44.82
MXW001R Aluminum Link Rod...
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Price
SGD40.75
NTW003 ZDC Center Gear Set
Durable die-cast center gear to beef up the drive train.
Price
SGD20.37
IFW611B-1 Brass Front Hab...
New 1 degree hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Price
SGD38.71
EFW012 Ride Hight Adjust...
Ride height adjustment spacers for the Fantom EP 4WD and EXT. Can be installed in the front and rear between the axle mount and chassis. Allows 2 different(0.5mm / 1.0mm) lower positions.
Price
SGD24.22
OTW146 Aluminum Servo Mount...
High-precision, high-rigidity CNC machined 6061T6 aluminum servo mount.
Price
SGD36.33
OTW138 HD Plate Set (Optima...
CNC machined 2.5mm thick carbon front and rear suspension plate, rear side plate set. Lighter and much stronger than normal aluminum
Price
SGD57.05
OTW137 HD Rear Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product.
Price
SGD67.23
IFW628 Carbon Radio Plate
Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD81.50
IFW629B Aluminum Front Hub...
22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.
Price
SGD199.66
EFW004 Front Double...
Optional parts for the FANTOM EP 4WD. By replacing 6x15x5mm bearing for wheel shaft with 2pcs 6x10x3mm bearings, reduces shaft vibration and friction loss. Gold anodized finish Bearing Holder. 2 sets included.
Price
SGD26.49
IFW615 HD Cap C-Universal...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
SGD48.90
IFW468C Front Hub Carrier...
Durable hard front hub carrier set. 17.5 degrees
Price
SGD28.51
IF460-2.9 Rear Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
SGD10.00
IF611H Front Lower Sus. Arm...
Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.
Price
SGD20.37
IFS005-816 Big Shock Spring...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Price
SGD40.75
IFW631B Carbon Front Shock...
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Price
SGD136.00
IFW626 Carbon Upper Plate
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD52.97
EFW003 SP Rear Wheel...
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
Price
SGD32.60
