Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.

Light weight shock bushings designed to use with the carbon shock towers(IFW631/IFW632). Not to be used with the aluminum shock towers.

Optional parts for Inferno MP10/MP10e/MP10T/MP10Te

Spare part for INFERNO MP10 TKI3

Optional parts for the INFERNO MP10.
Approximately 34g lighter in total than standard steel screws.

Spare parts for the Fazer Mk2 Touring Car

95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.

95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.

Rear shock spring (81mm) for INFERNO MP10/MP9

Rear shock spring (85mm) for INFERNO MP10/MP9

Optional parts for INFERNO MP10. Rear Shock Stay for IS215 Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.

CNC machined motor mount for Ultima. High processing accuracy and improves cooling effect by fin shape. Gunmetallic anodized finish for dress up.

Front and rear stabilizer set for the Ultima. Allows to control excess roll when cornering to change the drive feeling.

Optional parts for Fazer MK2 FZ02L-B (Rage 2.0). Adapter for attaching the OT252 wing. When installs the wing, improves stability at high speed running.

Spare parts for the Ultima

Spare parts for the Ultima

Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors

Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.

Aluminum heat sink for the motor. Keeps motor temperture low efficiently.

For Mp10, MP9e

Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.

Spare parts for MP10
High strength and precision construction of molded rear hub delivers improved controllability and better handling char

Spare parts for MP10

Spare parts for MP10
At first glance the radio plate looks similar to the MP9 TKI4, but the MP10 design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm.

Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.

Spare parts for FAZER RAGE 2.0

Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.

Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.

4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.  

CNC machined front shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.

CNC machined rear shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.

Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.

Durable diff shafts.

Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.

Spare parts for the Ultima

Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.

Spare parts for the IFW615.

Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

New 1 degree hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.

FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.

※You need to purchase two to make one unit.

Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2

Optional parts for FAZER FZ02-R.

※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.

Spare part for INFERNO MP10 TKI3.

Spare part for INFERNO MP10 TKI3

Optional parts for the FAZER MK2

Spare parts for FAZER MAD VAN series and RAGE 2.0

Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.

22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.

INFERNO MP10 TKI2 Spare parts

4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets. 

Front shock spring (70mm) for INFERNO MP10/MP9

Rear shock spring (81mm) for INFERNO MP10/MP9

Spare parts for 1/10 Turing cars

Spare Part for Ultima

Spare parts for the Ultima

Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.

Spare parts for the IFW614.

CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

Durable hard front hub carrier set. 17.5 degrees

Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.

Spare parts for FAZER MK2

Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks

Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.

INFERNO MP10 TKI2 Spare parts

A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.

Front shock spring (70mm) for INFERNO MP10/MP9

Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.

Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.