There are 308 products.
Active filters
FA537B Slipper Plate Set...
Spare parts for FAZER MAD VAN series and RAGE 2.0
Price
SGD6.11
IFW628 Carbon Radio Plate
Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD81.50
IFW629B Aluminum Front Hub...
22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.
Price
SGD199.66
EFW004 Front Double...
Optional parts for the FANTOM EP 4WD. By replacing 6x15x5mm bearing for wheel shaft with 2pcs 6x10x3mm bearings, reduces shaft vibration and friction loss. Gold anodized finish Bearing Holder. 2 sets included.
Price
SGD26.49
97054-4R-B LED Light Unit...
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
SGD24.45
IFW615 HD Cap C-Universal...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
SGD48.90
FAW209B HD TC Center Shaft...
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Price
SGD18.00
IFW468C Front Hub Carrier...
Durable hard front hub carrier set. 17.5 degrees
Price
SGD28.51
IF460-2.9 Rear Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
SGD10.00
IF611H Front Lower Sus. Arm...
Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.
Price
SGD20.37
IFS005-816 Big Shock Spring...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Price
SGD40.75
IFW631B Carbon Front Shock...
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Price
SGD136.00
IFW626 Carbon Upper Plate
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD52.97
EFW003 SP Rear Wheel...
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
Price
SGD32.60
97054-2B LED light unit (Φ5...
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
Price
SGD16.30
IFW623 HD Front Shock...
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
SGD101.87
FAW214 Metal Servo Saver...
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
Price
SGD91.68
FAW217 HD Motor Mount (FZ02)
CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis
Price
SGD34.64
IFW611-0 Brass Front Hab...
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Price
SGD28.52
IFW610 Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
SGD28.52
IFW604-10 Front Chassis...
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Price
SGD40.75
IFW601C Titanium Rod Set...
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
Price
SGD224.11
IF624-65 HD Sus. Shaft...
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Price
SGD14.26
IF611S Front Lower Sus. Arm...
Spare parts for MP10
Front and rear lower suspension arms have been significantly reinforced for greater strength and also designed so they don’t catch dirt for easier cleaning and maintenance. The new arms are also substantially thicker around the large diameter φ4.5mm hinge pins to make the arms even more resilient.
Price
SGD18.34
- New
- New
FA535-S20 Pinion Gear S20T...
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
Price
SGD8.07
FAW230 1:10 Scale Radio...
～ for the full rally experience ～
Rally conversion set for the Fazer MK2 touring cars with short wheelbase. Longer suspension stroke allows off-road driving. Includes longer shocks, shock towers and related parts. Does not come with tire and wheels.
Price
SGD130.19
OTW141 HD Upper Deck...
CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.
Price
SGD87.61
EFW002 Carbon Gear...
Lightweight Carbon Rear Shaft for the FANTOM EP 4WD. Improves throttle response by lighter rotating parts. The screw part at tip of differential side is assembled with aluminum parts by factory. Recommended to use with EFW003.
Price
SGD32.60
IFS004-1014 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Price
SGD28.52
IFW618 Ring Gear (42T/MP10)
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
Price
SGD65.20
IFW603 3PC Clutch Set...
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
Price
SGD138.54
FAW225 TC Aluminum Shock Set
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
Price
SGD76.00
IFW643 KPI Front Knuckle...
Optional parts for the 1/8 Inferno MP10 Buggy series. The standard knuckle has a kingpin angle of 0°, while this set features knuckles with 7°kingpin angle. This design reduces front tire catching, particularly in high-speed corners, allowing for higher cornering speeds. It also improves stability, enabling the vehicle to better absorb sudden movements caused by surface gaps or irregularities.
Price
SGD199.00
82278 Mini Servo KS3031-04M...
■Operating Voltage: 4.8-6.0V
■Size：L35.9mm W15.1mm H28.6mm
■Speed：0.13sec/60°
■Torque：4.5kgf・cm
■Weight：30g
■Led Wire：150mm
■Serration：25 / for FUTABA・KYOSHO
・Servo x1
・Horn A x1
・Horn B x1
・Horn C x1
・3ｘ5ｘ1mm Spacer x1
・Eyeletｘ4
・Screw 2.3x12mm x4
・Screw 2.6ｘ6ｍｍｘ1
・Grommetｘ4
Price
SGD84.78
FAW205 HD Front hub...
Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.
Price
SGD76.70
FAW206 HD Rear hub (FZ02/2pcs)
Option parts for the Fazer Mk2. CNC machined aluminum rear hubs allow smoother suspension movement. Allows 2 camber angle adjustments.
Price
SGD72.67
IFW627 Carbon Center...
Carbon center bulk plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD38.71
