There are 166 products.
Active filters
Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Carbon Front Suspension Arm for the FANTOM EP 4WD. Allows weight reduction and increased rigidity around front parts by replacing FRP upper and lower suspension arms, improves initial steering reaction.
Durable steel front center shaft cup. Precision CNC machined for heavy duty use.
Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.
Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
High precision brass link balls for smoother shock and link rod movement. A set contains 12 pcs.
Machined brass front hub. Increases the weight distribution on the front wheels for improved uphill performance.
Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.
Optional parts for Fazer MK2 FZ02L-B (Rage 2.0). Adapter for attaching the OT252 wing. When installs the wing, improves stability at high speed running.
Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors
Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.
Aluminum heat sink for the motor. Keeps motor temperture low efficiently.
Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
FRP main chassi and carbon front upper plate. More rigid flex allows more responsive steering.
Carbon upper deck. More rigid than the FRP version allowing less flex and roll. Great for high traction surface.
Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. (Includes silicon oil)
* This product is not compatible with the MM2 motor case
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.
Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.
Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.
Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Ride height adjustment spacers for the Fantom EP 4WD and EXT. Can be installed in the front and rear between the axle mount and chassis. Allows 2 different(0.5mm / 1.0mm) lower positions.
Spare parts for FAZER MAD VAN series and RAGE 2.0
Optional parts for the FANTOM EP 4WD. By replacing 6x15x5mm bearing for wheel shaft with 2pcs 6x10x3mm bearings, reduces shaft vibration and friction loss. Gold anodized finish Bearing Holder. 2 sets included.
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.
<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2
