There are 228 products.
Active filters
Spare parts for MP10
Front and rear lower suspension arms have been significantly reinforced for greater strength and also designed so they don’t catch dirt for easier cleaning and maintenance. The new arms are also substantially thicker around the large diameter φ4.5mm hinge pins to make the arms even more resilient.
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Spare parts for MP10
Newly designed upper plate delivers improved front traction and steering performance.
Spare parts for MP10
At first glance the radio plate looks similar to the MP9 TKI4, but the MP10 design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm.
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Compared to conventional 3pc clutch shoes, durability is greatly improved More accurate for clutch on & off by material change. ※Option parts for INFERNO series.
Option part for the INFERNO MP10, MP10 TKI2, and MP10T.
Lower weight than the existing aluminum clutch shoes, but stronger acceleration with the refined engagement surface.
Two types of clutch springs, Φ0.9 and Φ0.95 are available for a wider range of clutch settings.
Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
New light weight 45T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Spare parts for FAZER MAD VAN series and RAGE 2.0
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Spare parts for MP10
High strength and precision construction of molded rear hub delivers improved controllability and better handling char
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Light weight shock bushings designed to use with the carbon shock towers(IFW631/IFW632). Not to be used with the aluminum shock towers.
Optional parts for Inferno MP10/MP10e/MP10T/MP10Te
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
Ride height adjustment spacers for the Fantom EP 4WD and EXT. Can be installed in the front and rear between the axle mount and chassis. Allows 2 different(0.5mm / 1.0mm) lower positions.
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
FRP main chassi and carbon front upper plate. More rigid flex allows more responsive steering.
Carbon upper deck. More rigid than the FRP version allowing less flex and roll. Great for high traction surface.
Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.
