There are 117 products.
Active filters
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
OTH248YB 2.2 Dish...
2.2 inch rear wheel with offset suitable for vintage buggy chassis.
Used when using 2.2 inch tires.
38mm width.
<Compatible chassis> *2.2 inch tires are required for each vehicle.
No.30617 Optima
No.30618 Javelin
No.30619 Turbo Optima
No.30622 Optima Mid
No.30625 Ultima
FA537B Slipper Plate Set...
Spare parts for FAZER MAD VAN series and RAGE 2.0
OTW141 HD Upper Deck...
CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.
OTW138 HD Plate Set (Optima...
CNC machined 2.5mm thick carbon front and rear suspension plate, rear side plate set. Lighter and much stronger than normal aluminum
OTW137 HD Rear Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product.
FAW241 Rally Spring...
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
FAW227 Ball Diff 40T (for...
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
FAW215 +5mm HD Wheel Hub...
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
FA535-S20 Pinion Gear S20T...
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
OTW146 Aluminum Servo Mount...
High-precision, high-rigidity CNC machined 6061T6 aluminum servo mount.FAW226 TC Carbon Bumper...
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
MXW004 Brass Rear Axle Cap
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
MXW007 4.8 Brass Ball(12pcs)
High precision brass link balls for smoother shock and link rod movement. A set contains 12 pcs.
MZW429R-01 Forked connector...
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
97054-2B LED light unit (Φ5...
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
MXTH002HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
MXW001R Aluminum Link Rod...
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
FAW221 ST Ball in out Tool...
Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.
FAW220 High Mount Wing...
Optional parts for Fazer MK2 FZ02L-B (Rage 2.0). Adapter for attaching the OT252 wing. When installs the wing, improves stability at high speed running.
FAW211B HD Center Shaft Cup...
Durable steel front center shaft cup. Precision CNC machined for heavy duty use.
FAW208B HD Stabilizer Set...
Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.
FAW213 HD Supr Gear 75T...
Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors
FAW203 Universal Swing...
Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
FAW202B TC Universal Swing...
Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
FAW212 HD Center Shaft Cup...
Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.
FAW209B HD TC Center Shaft...
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
FAW230 1:10 Scale Radio...
~ for the full rally experience ~
Rally conversion set for the Fazer MK2 touring cars with short wheelbase. Longer suspension stroke allows off-road driving. Includes longer shocks, shock towers and related parts. Does not come with tire and wheels.
FAW205 HD Front hub...
Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.
MXW005 Brass Front Hub
Machined brass front hub. Increases the weight distribution on the front wheels for improved uphill performance.
97054-4B LED Light Unit...
4 light clear LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
MXTH001HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
FAW214 Metal Servo Saver...
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
FAW204 HD Wheel Hub...
Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.
FAW219 HD ST Ball (FZ02/4pcs)
Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.
FAW217 HD Motor Mount (FZ02)
CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis
FAW210 HD Center Shaft L...
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.