There are 189 products.
Active filters
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
SGD28.00
OTH248YB 2.2 Dish...
2.2 inch rear wheel with offset suitable for vintage buggy chassis.
Used when using 2.2 inch tires.
38mm width.
<Compatible chassis> *2.2 inch tires are required for each vehicle.
No.30617 Optima
No.30618 Javelin
No.30619 Turbo Optima
No.30622 Optima Mid
No.30625 Ultima
Price
SGD18.33
FA537B Slipper Plate Set...
Spare parts for FAZER MAD VAN series and RAGE 2.0
Price
SGD6.11
MZW39-30 MINI-Z Low Height...
Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.
Price
SGD12.22
MZW38-20B MINI-Z Racing...
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
Price
SGD15.14
OTW141 HD Upper Deck...
CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.
Price
SGD87.61
OTW138 HD Plate Set (Optima...
CNC machined 2.5mm thick carbon front and rear suspension plate, rear side plate set. Lighter and much stronger than normal aluminum
Price
SGD57.05
OTW137 HD Rear Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product.
Price
SGD67.23
MZW405 Gyro Unit Set(for...
Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.
Price
SGD71.31
MZW39-20B MINI-Z Low Height...
Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.
Price
SGD13.24
MZW38-30 MINI-Z Racing...
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
Price
SGD14.26
MZW707 Height Adjust Ball...
Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.
<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2
Price
SGD32.00
MZW710-10 Aluminum Steering...
Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.
Price
SGD56.00
FAW241 Rally Spring...
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Price
SGD24.00
FAW227 Ball Diff 40T (for...
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
Price
SGD100.00
FAW215 +5mm HD Wheel Hub...
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Price
SGD96.00
FA535-S20 Pinion Gear S20T...
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
Price
SGD8.07
OTW146 Aluminum Servo Mount...
High-precision, high-rigidity CNC machined 6061T6 aluminum servo mount.
Price
SGD36.33
FAW226 TC Carbon Bumper...
Carbon bumper brace for FZ02 / 02L chassis. Supports bumper and increases chassis rigidity.
Price
SGD38.35
MXW004 Brass Rear Axle Cap
Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.
Price
SGD30.28
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Price
SGD40.75
MXW007 4.8 Brass Ball(12pcs)
High precision brass link balls for smoother shock and link rod movement. A set contains 12 pcs.
Price
SGD18.34
MZW429R-01 Forked connector...
A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.
Price
SGD16.30
97054-2B LED light unit (Φ5...
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
Price
SGD16.30
MXTH002HW...
A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.
Price
SGD44.82
MXW001R Aluminum Link Rod...
Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.
Price
SGD40.75
NTW006 11mm Suspension...
11mm suspension balls made with high quality material. Increases efcient and reliable suspension movement.
Price
SGD16.30
