There are 1548 products.
MDW021 Aluminium Pinion...
Precision aluminum gear. Realizes high efficiency.
Price
SGD36.67
MDW005-15 Camber Knuckle...
Knuckle set for changing rear camber. 3 angle types.
■MDW005-15 / MDW005-30 / MDW005-45
Price
SGD10.19
MDW004 Suspension Spring...
Spring set adjusts hardness of suspension. Includes 3 hardness types. *For MA-020S rear.
Price
SGD18.34
MBW034 Front Joint Gear...
Machined brass hard joint gear. Eliminates shaft slip and transfers driving force reliably to the front wheels.
Price
SGD24.45
MBW023B Universal Swing...
Universal swing shaft for MINI-Z Buggy/Comic Racer. Delivers improved drive efficiency and prevents shaft dropping out. Interchangeable on front and rear.
Price
SGD40.75
MAW023B 4WS Conversion Set...
4WS conversion set for the Mad Crusher. Allows rear wheels to steer with the front wheels.
Price
SGD65.19
ISB101C Clear Body...
Spare Parts for INFERNO ST-RR EVO2
※Old Parts #：ISB101
Price
SGD105.94
IS053C 6.8mm Ball End...
Spare parts for MP10
The optimized Ackerman in the MP10 delivers an increase in lock-to-lock steering travel. The design of the new reinforced tie rod ends doesn’t interfere with the inside of the tire and wheel when steering is at maximum angle.
Price
SGD18.00
GPW11B Special Gear ＆ Spoket
This steel sprocket offers great durability as well as high precision.
Price
SGD81.50
82083 I.C.S. USB Adaptor HS
Optional parts for MINI-Z
MR-03EVO, MA-030EVO A set of USB adapter HS and cable required when setting the chassis set with the I.C.S setting manager.
* Cannot be used for RWD, FWD, AWD, 4X4, and buggy ready set products.
Price
SGD81.50
82042 MINI-Z EVO RXUNIT...
Receiver unit for the MINI-Z EVO chassis. Supports the Futaba 7PX and 7XC transmitters.
Price
SGD60.10
80165 Cross Wrench...
Cross wrench good for changing plugs and flywheel on nitro cars(5.5mm/7mm/8mm/10mm).
Also have slots to hold spare glow plugs.
Price
SGD18.34
32540GM MINI-Z 4x4 readyset...
■Length 200.5mm
■Width 87mm
■Height 104.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 238/g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1 / 46.20：1 / 39.60：1 / 34.65：1 / 30.80：1 / 27.72：1
■Front Tire Φ42.0mm
■Rear Tire Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
<Kit Content>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
<Required to run>
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Price
SGD362.33
30645 1:10 Scale Radio...
■Length 370mm
■Width 250mm
■Height 130mm
■Wheelbase 260-263mm
■Tread F:208mm / R:214
■Weight approx 1500g(with 7.2V4000 LiPo）
■Tires F: φ75×20mm / R: φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.64：1
<Kit Content>
●Kit chassis
●Tire
●Wheel
●Clear body
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
●Ball Diff Grease
＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L42xW21xH38mm
●540Motor
●ESC
ESC size：L45xW38xH27mm
●Battery for chassis
Battery size：L140xW47.5xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body
Price
SGD549.00
ISW203 LW Al Motor...
MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.
Price
SGD199.66
32536GR MINI-Z 4x4 readyset...
■Length 202.0mm
■Width 95.0mm(Both ends of the tire)
■Height 96.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:77.0mm
■Weight 247.6g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ40.5mm
■Rear Tire Diameter Φ40.5mm
■Front Tire Width 18.0mm
■Rear Tire Width 18.0mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Require to run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Price
SGD362.33
IFW609C Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for Futaba servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
SGD40.74
