There are 20 products.
HT-RC C150 10A AC/DC RC...
TITLE:C150 BALANCE CHARGER
MODEL:HT-0097
SPECIFICATIONS
Charge power:AC/DC Input150W
Discharge power:10W
Charge current range:0.1-10A
Discharge current range:0.1-2A
Lilon/LiPo/LiFe/LiHV cell count :1-6cells
NiCd/NiMH battery cell count:1-15cells
PB Battery voltage:2-20V
Smart battery:I/II/III
Current drain for balancing: 500mA/cell
34936T1 1:8 Scale RC...
■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm/Φ86×23mm
■Gear Ratio 13.80:1~19.30:1
■Weight 750g (approx.)
■Motor Le Mans DM20
<Kit Content>
●Chassis kit
●Pinion gear (10T, 12T, 14T)
<Required to run>
●2ch R/C system
●Batteries for transmitter
●servo×1 (Recommended: NoGPW20)
●ESC×1 (Recommended: No.GPW17)
●Battery for chassis(7.2V-1600mAh Ni-MH)
●Charger for battery
●Charger Convert Connector
●Grease(Recommended:No.96508)
●Paint
●Tool
32294 MINI-Z Buggy VE2.0 SP...
■Length 163mm
■Width 105mm
■Height 46mm
■Wheelbase 115mm
■Tread(F/R) 89mm/89mm
■Tires(F/R) φ37×13.5mm/φ37×18.5mm
■Weight 200g approx.
■Motor SPEED HOUSE XSPEED 85 (8500KV)
<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts
<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)
34492T1 1970 Dodge Charger...
■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
30618 Kyosho JAVELIN 1/10...
■Length 403mm
■Width 240mm
■Height 130mm
■Wheelbase 260mm
■Front Tread 204mm
■Rear Tread 204mm
■Weight 1,700g (approx.)
■Tires (F & R) φ86×40mm
■Motor 540 Class size(sold separately)
■Gear Ratio 9.24:1
SWSGS02 SGS-02 Gyro SXR...
・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR
34494T1 1970 Chevy®...
■Length 490mm
■Width (Body width * excluding mirror) 208mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tool
34312 1:10 Scale Radio...
■Length 378mm
■Width 249mm
■Height 150mm
■Wheelbase 270mm
■Tread (F/R) 221mm/201mm
■Tire F:φ84×33mm R:φ86.5×42mm
■Gear Ratio 8.23:1
■Weight 約1,480g
■Motor (sold separately)
< Kit Contents >
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench(1.5mm/2.0mm)
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear(24T)
【REQUIREMENT TO RUN】
■2ch~3ch transmitter & receiver for R/C cars
■Servo
■ESC
■Motor
■Silicone oil for Shock
■Batteries for chassis(2S Lipo Recommendation)
■Charger
■Paint for coloring body (*spray paint for polycarbonate)
■Tool
34471T1 Toyota Supra (A80)...
■Length 455mm
■Width(Body width) 200mm(210mm)
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ64×24.2mm/R:φ64×24.2mm
■Gear Ratio 6.54:1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
33025T1S 1:8 Scale Radio...
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21V (recoil starter installed/rear exhaust)
<kIT cONTENT>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21V engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench
<Require for operation>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)
72012 SPEED HOUSE Multicell...
■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used
34491T1 MAD VAN VE 1:10...
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F:250mm/R:250mm
■Tires (F/R) F:φ110×70mm/R:φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
HT-RC C240 DUO AC150W/DC...
TITLE:C240 DUO
MODEL:HT-0098
SPECIFICATIONS
Charge power:AC Input(CH1+CH2=150W)DC INPUT(120W*2=240W)
Discharge power:10W*2
Charge current range:0.1-10A*2
Discharge current range:0.1-2A*2
Lilon/LiPo/LiFe/LiHV cell count :1-6cells*2
NiCd/NiMH battery cell count:1-15cells*2
PB Battery voltage:2-20V*2
Smart battery:I/II/III*2
Current drain for balancing: 500mA/cell
71999 KYOSHO SPEED HOUSE...
USB-powered quick charger compatible with AA and AAA nickel-metal hydride batteries.
71998 KYOSHO SPEED HOUSE 800HV Excellent compatibility with AAA nickel metal hydride batteries.
Compact AA / AAA NiMH charger powered by USB. Up to 1A charging per slot. USB power supply sold separately.