Spare part for INFERNO MP10 TKI3.

Spare parts for the Fazer Mk2 Touring Car

Spare parts for the MP10T

Spare parts for the Nitro Tracker

Spare parts for the MP10T

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40

Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.

■Length 398mm 
■Width 236mm 
■Height 165mm 
■Wheelbase 263mm 
■Tread (F/R) 198mm / 195mm 
■Tire(F/R) 75×20mm / 85×41mm 
■Gear Ratio H setting 6.9:1　L setting 8.3:1 (2 combinations included) 
■Weight 1,040g approx. (w/out R/C system & battery) 
■Motor 540-class (sold separately)

Can fit in Inferno Neo

Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.

Spare parts for MR-04 EVO2

Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. (Includes silicon oil)

* This product is not compatible with the MM2 motor case

Spare parts for OPTIMA MID

Spare parts for the FANTOM EP 4WD

Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.

■Length 398mm 
■Width 236mm 
■Height 145mm 
■Wheelbase 263mm 
■Tread (F/R) 198mm /195mm 
■Tire(F/R) 75×20mm / 85×41mm 
■Gear Ratio H setting 6.9:1　L setting 8.3:1 (2 combinations included) 
■Weight 985g approx.(w/out R/C system & battery) 
■Motor 540-class

Optional front soft springs for the MP10/MP9.

Spare Parts for INFERNO MP9/MP10/MP11.

Spare parts for MR-04 EVO2

Spare parts for MAD WAGON

Optional parts for the INFERNO MP10.

■Length 450mm
■Width 195mm(Body width:196mm)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 260mm
■Tread (F/R)  167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

Spare parts for OPTIMA MID

■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.

Optional parts for Inferno MP10/MP10e/MP10T/MP10Te

INFERNO MP10 TKI2 Spare parts

95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.

95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.

Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.

Can fit in Inferno Neo

Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.

■Length 126mm
■Width 65mm
■Height 34mm
■Wheelbase 94（L）～98（LL）mm
■Tred (F/R) 65～76mm／65～76mm
■Tire (F/R) Φ25.0×8.5 mm／Φ25.0×8.5、11 mm（sold separately）
■Gear Ratio　6.4 / 6.0 / 5.7 / 5.3 / 5.0 / 4.5 : 1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)

＜SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Spur gears (27T / 29T / 31T)

●EVO2 compatible transmitter
●EVO2 compatible receiver unit
●Auto Scale Collection (body, wheels and tires)
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

Spare parts for the Fazer D2 chassis

Spare parts for the Fazer D2 chassis

Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.

Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.

Spare parts for the FAZER MK2

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.

Spare parts for Optima Mid

Spare parts for the MP10T

Front shock spring (70mm) for INFERNO MP10/MP9

Spare parts for the Ultima

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Optional parts for the INFERNO MP9/MP10. 
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.

■Length      395mm
■Width       244mm
■Height      120mm
■Wheelbase   260mm
■Front Tread  208mm
■Rear Tread   208mm
■Weight      1,600g (approx.)
■Tires (F/R)  φ82×36mm
■Motor       540 class size (sold separately)
■Gear ratio    9.24 : 1

■Length: 395mm 
■Width: 240mm 
■Height: 120mm 
■Ground Clearance: 36mm 
■Wheelbase: 260mm 
■Tread (F/R): 204mm / 204mm 
■Tire(F/R): 86f x 40mm / 86f x 40mm 
■Gear Ratio: 9.24:1 
■Weight: approx. 1,600g 
■Motor: 540 class size 
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size 
■R/C System: 2 channel, 1-servo, ESC

■Length 408mm 
■Width 256mm 
■Height 145mm 
■Wheelbase 273mm 
■Tread (F/R) 218mm/215mm 
■Tire(F/R) Φ82×27mm / Φ86×42mm 
■Gear Ratio 6.9 : 1 / 8.3 : 1 (select from 2-type) 
■Weight 1,500g (approx.) 
■Motor 540-type (sold separately)

■Length 370mm
■Width 250mm
■Height 130mm
■Wheelbase 260-263mm
■Tread F:208mm / R:214
■Weight approx 1500g(with 7.2V4000 LiPo）
■Tires F: φ75×20mm / R: φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.64：1

<Kit Content>
●Kit chassis
●Tire
●Wheel
●Clear body
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
●Ball Diff Grease

＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L42xW21xH38mm
●540Motor
●ESC
ESC size：L45xW38xH27mm
●Battery for chassis
Battery size：L140xW47.5xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body