There are 2411 products.
Active filters
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
■Length 398mm
■Width 236mm
■Height 165mm
■Wheelbase 263mm
■Tread (F/R) 198mm / 195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 1,040g approx. (w/out R/C system & battery)
■Motor 540-class (sold separately)
■Length 398mm
■Width 236mm
■Height 145mm
■Wheelbase 263mm
■Tread (F/R) 198mm /195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 985g approx.(w/out R/C system & battery)
■Motor 540-class
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.
Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.
■Length 397mm
■Width 250mm
■Height 135mm
■Wheelbase 273mm
■Tread（F／R） 212mm / 208mm
■Weight approx 1620g (with 7.2V4000 LiPo）
■Tires（F／R） φ82×30mm / φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1
<Kit Contents>
●Chassis
●Tire
●Wheel
●Clear body＆underbody
●Decals
●Hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●#200Shock oil
●Ball Differential Grease
＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L41xW21xH38mm
●540Motor
●ESC
ESC size：L40xW42xH29.5mm
●Battery for chassis
Battery size:L140xW50xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body
Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.
Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
■Length: 395mm
■Width: 240mm
■Height: 120mm
■Ground Clearance: 36mm
■Wheelbase: 260mm
■Tread (F/R): 204mm / 204mm
■Tire(F/R): 86f x 40mm / 86f x 40mm
■Gear Ratio: 9.24:1
■Weight: approx. 1,600g
■Motor: 540 class size
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size
■R/C System: 2 channel, 1-servo, ESC
