There are 1730 products.
71998 KYOSHO SPEED HOUSE...
Rechargeable AAA NiMH batteries for the MINI-Z sereis. Provide great power and good runtime. 4 pcs included.
Price
SGD20.00
MDW024 Rigid Axle(for...
Eliminates differential effect to realize stable drift driving. Can be installed on both front and rear.
Price
SGD40.75
MBW034 Front Joint Gear...
Machined brass hard joint gear. Eliminates shaft slip and transfers driving force reliably to the front wheels.
Price
SGD24.45
IF604 Hard Front Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
SGD101.87
- New
- New
34801T1 1:10 Scale Radio...
■Length : 552mm
■Width : 236mm (※Excluding mirror)
■Width : 255mm
■Height : 248mm
■Wheelbase : 317mm
■Tread : 208mm (F/R)
■Weight : Approx. 3,080 g (with 2-cell LiPo battery installed)
■Tires : φ110 x 37mm
■Gear Ratio : 49.1:1 (21.1:1 in high gear when using CLW001)
■Motor : G32L brushed motor
<Readyset Contents>
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–231P+ transmitter
●Hex wrench (1.5 / 2.0 mm)
●Cross wrench (4 / 5 / 5.5 / 7 mm)
●Setting change parts
＜Required for Operation＞
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
Price
SGD499.00
IFS006-1116 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFW634-46S Light Weight...
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
SGD64.59
MBW018RB Aluminum Front Hub...
Aluminum front hub carrier. Provides increased rigidity and better appearance.
Price
SGD61.12
37051B Le Mans 240S ESC...
Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80
Price
SGD121.22
IF459-2.9 Front Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
SGD9.00
30619 TURBO OPTIMA KIT...
■Length 395mm
■Width 244mm
■Height 120mm
■Wheelbase 260mm
■Front Tread 208mm
■Rear Tread 208mm
■Weight 1,600g (approx.)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 9.24 : 1
Price
SGD508.33
MZW439R LED Light...
Light unit compatible with the I.C.S connector of the RC units of ASF and MHS/ASF systems. Tail lights are brighter while braking.
Price
SGD18.34
MDW017 Front Oneway...
Absorbs difference in front and rear tire rotation even through small corners to realize ultra-smooth cornering. Suitable for technical courses where quick handling is required.
Price
SGD71.31
MDW004 Suspension Spring...
Spring set adjusts hardness of suspension. Includes 3 hardness types. *For MA-020S rear.
Price
SGD18.34
30617 Kyosho OPTIMA 1/10 EP...
■Length: 395mm
■Width: 240mm
■Height: 120mm
■Ground Clearance: 36mm
■Wheelbase: 260mm
■Tread (F/R): 204mm / 204mm
■Tire(F/R): 86f x 40mm / 86f x 40mm
■Gear Ratio: 9.24:1
■Weight: approx. 1,600g
■Motor: 540 class size
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size
■R/C System: 2 channel, 1-servo, ESC
Price
SGD487.95
30616 Kyosho TURBO SCORPION...
■Length 408mm
■Width 256mm
■Height 145mm
■Wheelbase 273mm
■Tread (F/R) 218mm/215mm
■Tire(F/R) Φ82×27mm / Φ86×42mm
■Gear Ratio 6.9 : 1 / 8.3 : 1 (select from 2-type)
■Weight 1,500g (approx.)
■Motor 540-type (sold separately)
Price
SGD406.46
34113T1S 1：8 Scale Radio...
■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Weight 3,370g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor
<Readyset Contents>
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
<Required for Operation>
●4 x AA batteries for transmitter
●2 x batteries for chassis
●Charger for batteries for chassis
●Regulated power supply
Price
SGD829.00
34436T1 1971 Mercedes-Benz...
■Length 496mm
■Width 206mm (Body width * excluding mirror)
■Height 142mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
Price
SGD352.23
IFW609C Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for Futaba servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
SGD40.74
IFS006-10516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFS005-8516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
