There are 4772 products.
Active filters
VZ413-56B 2nd Spur Gear...
UMW509GMB SP Motor Plate...
UMW509GMB Offical Kyosho website and online shop for Mini-Z, Optima, Inferno and others, including Kyosho diecast models, miniature cars, Kyosho Egg brand and all latest information.
UB015 Carbon Battery Holder...
UB010 Rear Upper Rod Mount...
FA557 TC Spur Gear Shaft...
FA554-2 TC Short Shock...
MZW709 Friction Damper Set...
For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.
34312 1:10 Scale Radio...
■Length 378mm
■Width 249mm
■Height 150mm
■Wheelbase 270mm
■Tread (F/R) 221mm/201mm
■Tire F:φ84×33mm R:φ86.5×42mm
■Gear Ratio 8.23:1
■Weight 約1,480g
■Motor (sold separately)
< Kit Contents >
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench(1.5mm/2.0mm)
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear(24T)
【REQUIREMENT TO RUN】
■2ch~3ch transmitter & receiver for R/C cars
■Servo
■ESC
■Motor
■Silicone oil for Shock
■Batteries for chassis(2S Lipo Recommendation)
■Charger
■Paint for coloring body (*spray paint for polycarbonate)
■Tool
ISW203 LW Al Motor...
MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.
36231P SP Knife Edge Reamer...
The blade is maked 7mm,9mm,11mm,13mm and 15mm.When using please use the marking as an indicator.
IFW469B Aeration Cap...
Option Parts for INFERNO MP9
Shock cap set to change the existing MP9 damper to aeration type. For 1 car.
Features of the aeration type are excellent in absorbing gap of fine road surface, and improve the grip feeling and advancing force.
34436T1 1971 Mercedes-Benz...
■Length 496mm
■Width 206mm (Body width * excluding mirror)
■Height 142mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
34434T1 1965 Buick®...
■Length 500mm
■Width 211mm(Body width * excluding mirror)
■Height 130mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
OTT244SB Block Tire...
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface.
MA356 Rear Hub Carrier(MAD...
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.
IGW008B-05 2-Speed...
2-Speed Transmission gear unit for the Inferno GT2 series.
37034 LE MANS 240 GOLD...
Based on the 240S 4WD (15.5T), this 240 gold motor (13.5T) has been enhanced for higher rev. Best matched for the Optima series.
34417T2 1:10 Scale Radio...
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
MZP243OR ASC MR-03W-MM...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren Senna GTR.
MZP453GM ASC MA-020S Honda...
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
OTW138 HD Plate Set (Optima...
CNC machined 2.5mm thick carbon front and rear suspension plate, rear side plate set. Lighter and much stronger than normal aluminum
IGW001GM Al Front Hub...
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
MBW017RB Aluminum Knuckle...
Aluminum knuckles. Provides increased rigidity and better appearance.
34471T1 Toyota Supra (A80)...
■Length 455mm
■Width(Body width) 200mm(210mm)
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ64×24.2mm/R:φ64×24.2mm
■Gear Ratio 6.54:1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L