Machined brass rear axle cap. Increases the weight distribution on the rear wheels for improved downhill performance.

Optional parts for INFERNO MP10 series and MP9 series. Light weight 47T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, acceleration will be quicker and smoother. Smoother deceleration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires to use with IF403B Diff case set.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren Senna GTR.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Spare parts for OPTIMA MID

Spare Parts for OPTIMA

■Length 455mm
■Width（Body width） 200mm（210mm）
■Height　120mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ64×24.2mm／R：φ64×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

Carbon Rear shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks.

A connector that allows the LED light unit (MZW429R) to be installed in double.
* MZW439R for ICS connector is not supported.

Spare parts for the Nitro Tracker

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

A pair of pre-glued tires and wheels assembled with a weight inside. Using on the front ensures excellent traction for hill climbing.

Stunning red anodized aluminum link rods for better appearance. For 110mm wheelbase.

CNC machined front shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.

CNC machined rear shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.

Spare parts for the MP10T

Spare parts for the MP10T

Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap screw without damaging the ball, as well as easy removing. Also useful when changing from nylon ball to optional the FAW218 HD ST ball.

Durable diff shafts.

Optional parts for the Fazer MK2 FZ02L-B (Rage 2.0). Durable wheel hubs.

Spare parts for the Ultima

Optional parts for the Fazer MK2 and the FZ02. High precision stainless steel machined ball for front hub. Improves the durability.

Spare parts for the GT2

Spare parts for the IFW615.

Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

Durable die-cast center gear to beef up the drive train.

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

New 1 degree hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.

Spare parts for the INFERNO NEO ST 3.0

Rechargeable AAA NiMH batteries for the MINI-Z sereis. Provide great power and good runtime. 4 pcs included.

Can be installed on MR-03VE, MA-015, MA-020VE and MB-011.

Eliminates differential effect to realize stable drift driving. Can be installed on both front and rear.

Machined brass hard joint gear. Eliminates shaft slip and transfers driving force reliably to the front wheels.

■Length : 552mm
■Width : 236mm (※Excluding mirror)
■Width : 255mm
■Height : 248mm
■Wheelbase : 317mm
■Tread : 208mm (F/R)
■Weight : Approx. 3,080 g (with 2-cell LiPo battery installed)
■Tires  : φ110 x 37mm
■Gear Ratio : 49.1:1 (21.1:1 in high gear when using CLW001)
■Motor : G32L brushed motor

<Readyset Contents>
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–231P+ transmitter
●Hex wrench (1.5 / 2.0 mm)
●Cross wrench (4 / 5 / 5.5 / 7 mm)
●Setting change parts

＜Required for Operation＞
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED Light Unit Set (No. MZW429R) can only be installed on the front of the McLaren 12C GT3 2013.

※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN Fairlady 240Z-L Tuned Ver.

*The Auto Scale body alone is not drivable. Additionally, some bodies may not fit certain chassis.
*The separately sold LED light unit set (No.MZW429R) can be installed on the Toyota Corolla Levin AE86.

*The Auto Scale body alone is not drivable. Additionally, some bodies may not fit certain chassis.
*The separately sold LED light unit set (No.MZW429R) can be installed on the Toyota Corolla Levin AE86.

KB10L Spare parts for Toyota Tacoma.

Spare parts for KB10L Toyota Tacoma.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

※GTW20-2 / IG109 の代用品

Aluminum front hub carrier. Provides increased rigidity and better appearance.

Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80

Aluminum M3 Nylon Nut with Gunmetal color anodizing.

Optional front medium springs for the MP10/MP9.

Light unit compatible with the I.C.S connector of the RC units of ASF and MHS/ASF systems. Tail lights are brighter while braking.

Absorbs difference in front and rear tire rotation even through small corners to realize ultra-smooth cornering. Suitable for technical courses where quick handling is required.

Spring set adjusts hardness of suspension. Includes 3 hardness types. *For MA-020S rear.

Old product number: 94427

■Length 　490mm
■Width 　307mm
■Height　180mm
■Wheelbase　325mm (can be changed with rear hub collar)
■Tread (F/R)　254mm
■Tires (F/R)　φ116×44mm
■Weight　3,370g (approx..)
■Motor　KYOSHO SPEED HOUSE TORX 8 Brushless Motor

<Readyset Contents>
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●4 x AA batteries for transmitter
●2 x batteries for chassis
●Charger for batteries for chassis 
●Regulated power supply