32658MB Minute AWD Nissan Skyline GT-R R34 V.spec II Nur-Metallic Blue

I want more drivers to know about the Minute AWD. To achieve this, the Minute AWD Ready Set was born. Introduced "Variable Camber Suspension (VCS)" in the front, which optimized the camber change accompanying the stroke, and introduced a foundation with a revised steering control program to the MA-020 chassis. Compatible with dedicated gyro (sold separately: part number MZW711), equipped with dedicated space and gyro adjustment volume. The effect of the gyro can be adjusted by the chassis alone, reflecting the change in posture in the steering correction, providing beginners with a safe run and experts with support to show their full potential. Full bearing specification with as many as 14 additional bearings. We realized a full chassis with high efficiency and high durability at an affordable price. The set is a ready set equipped with a scale-like body unique to Minute and a 2.4GHz propo "Syncro KT-531P" that does not require band management.With standard drift tires, you can enjoy thrilling drift driving instantly with just a set of batteries. Of course, it corresponds to many of the ASC bodies that are Minute's assets (separate parts are required depending on the model). Please experience the run that can only be experienced with the AWD chassis with "Minute AWD".

* The LED light unit set (No.MZW429R) sold separately cannot be attached to the Nissan Skyline GT-R R34 V.spec II Nur.

A renewed version of the AWD sports chassis based on the ●MA-020 series chassis.
Dedicated foundation with revised ●steering control program.
A single ●chassis is equipped with a volume that can adjust the effectiveness of the gyro.
●Drift tire standard equipment.
Ready to run with a set of ●batteries.
Adopts a 2.4GHz Syncro KT-531P transmitter that does not require ●band management.
Factory finished body with the same finish as the ●display model.
Adopts the front ●suspension "VCS" that brings out the camber change due to the stroke of the suspension.
●Tool-free, easy front suspension coil spring replacement.
●A wide range of optional parts can be mounted.
●Note) Optional ICSs are not available. Also, because it is designed exclusively for KT-531P transmitters, it is not compatible with KT-18, KT19, EX-5UR ASF, EX-6, EX-6R transmitters. In addition, the gyro unit (sold separately: part number MZW711) is only compatible with specialty products.

Nissan Skyline GT-R V.SpecⅡ Nür (R34)

The last in the Skyline GT-R series, the V. Spec II Nür is Nissan’s final R34. To commemorate the Skyline GT-R, this limited-edition is equipped with a racing-based tuned engine.

Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim as well as dual rate adjustment of steering angle and control the flashing speed of optional LEDs. In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode).

Special AWD Sports chassis is based on the MA-02 chassis and features the RA45 unit.

Features VCS front suspension that optimizes camber change in concert with suspension stroke. Replacement of front suspension coil springs is easy with no tools required.

Equipped with strut-type rear suspension.

Full bearing specifications include 14 ball bearings.

Equipped with drift tires as standard.

Equipped with special mount space and gyro adjustment volume for the optional MZW711 gyro unit (sold separately).

Technical Data

■Length 167.0mm
■Width 70.0mm
■Height 46.0mm
■Wheelbase 94.0mm（L）
■Tread  F : 58.5mm R : 58.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.0mm
■Rear Wheel Offset Narrow +1.0mm
■Weight 183.3g
■R/C System Syncro KT-531P

Kit Contents

<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool

Requirement to Run

＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter