There are 254 products.
Active filters
IFW636 3PC HD LW Aluminum...
Option part for the INFERNO MP10, MP10 TKI2, and MP10T.
Lower weight than the existing aluminum clutch shoes, but stronger acceleration with the refined engagement surface.
Two types of clutch springs, Φ0.9 and Φ0.95 are available for a wider range of clutch settings.
Price
SGD36.33
IFW339B 3PC HD Aluminum...
Compared to conventional 3pc clutch shoes, durability is greatly improved More accurate for clutch on & off by material change. ※Option parts for INFERNO series.
Price
SGD40.37
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
SGD28.00
IFB023H Body (MP10...
New 1mm body for the MP10 and MP10TKI2. 1.0mm PC body is more durable and long lasting then the 0.8mm body.
Price
SGD73.35
IF605 Hard Rear Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
SGD112.06
FAW210 HD Center Shaft L...
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Price
SGD14.26
IFW642-2 Center Fin(1/8...
Optional parts for Inferno MP10/MP10e/MP10T/MP10Te
Price
SGD28.52
IFW613B HD Cap U-Swing...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
SGD97.78
IFW642-3 Wing Washer (for...
Optional parts for Inferno MP10/MP10e/MP10T/MP10Te
Price
SGD20.37
IF604 Hard Front Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
SGD101.87
IFS006-1116 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFW634-46S Light Weight...
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
SGD64.59
IF459-2.9 Front Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
SGD9.00
IFS006-10516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFS005-8516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFW634-45S Light Weight...
New light weight 45T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
SGD64.59
EFW005 Carbon Suspension...
Carbon Front Suspension Arm for the FANTOM EP 4WD. Allows weight reduction and increased rigidity around front parts by replacing FRP upper and lower suspension arms, improves initial steering reaction.
Price
SGD48.90
IFW619 Drive Bevel Gear...
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
Price
SGD38.71
FAW211B HD Center Shaft Cup...
Durable steel front center shaft cup. Precision CNC machined for heavy duty use.
Price
SGD18.00
FAW208B HD Stabilizer Set...
Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.
Price
SGD46.00
FAW203 Universal Swing...
Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Price
SGD71.31
IFW612B L/Weight Long Shock...
New Light weight long shock bushings sets the shock 3mm to the rear. This angle on the rear shocks improves the shock movement performance drastically and increases traction.
Price
SGD24.45
IF603 Front Upper Plate...
Spare parts for MP10
Newly designed upper plate delivers improved front traction and steering performance.
Price
SGD20.37
FAW227 Ball Diff 40T (for...
Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.
Price
SGD100.00
IFW633 L/Weight Short Shock...
Light weight shock bushings designed to use with the carbon shock towers(IFW631/IFW632). Not to be used with the aluminum shock towers.
Price
SGD20.00
IFW602 Titanium Screw Set...
Optional parts for the INFERNO MP10.
Approximately 34g lighter in total than standard steel screws.
Price
SGD141.30
IFS004-10514 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Price
SGD28.52
IFS004-1114 Big Shock...
95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.
Price
SGD28.52
IFW624 HD Rear Shock...
Optional parts for INFERNO MP10. Rear Shock Stay for IS215 Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
SGD112.06
FAW220 High Mount Wing...
Optional parts for Fazer MK2 FZ02L-B (Rage 2.0). Adapter for attaching the OT252 wing. When installs the wing, improves stability at high speed running.
Price
SGD6.11
FAW213 HD Supr Gear 75T...
Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors
Price
SGD28.52
FAW212B HD Center Shaft Cup...
Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.
Price
SGD18.00
FAW218B Motor Heat Sink...
Aluminum heat sink for the motor. Keeps motor temperture low efficiently.
Price
SGD26.00