Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.

Can fit in Inferno Neo

Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.

Spare parts for the Fazer D2 chassis

Spare parts for the Fazer D2 chassis

■Length 397mm
■Width 250mm
■Height 135mm
■Wheelbase 273mm
■Tread（F／R） 212mm / 208mm
■Weight  approx 1620g (with 7.2V4000 LiPo）
■Tires（F／R） φ82×30mm / φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1

<Kit Contents>
●Chassis
●Tire
●Wheel
●Clear body＆underbody
●Decals
●Hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●#200Shock oil
●Ball Differential Grease

＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L41xW21xH38mm 
●540Motor
●ESC
ESC size：L40xW42xH29.5mm
●Battery for chassis
Battery size:L140xW50xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body

Optional parts for MR-04 EVO2

Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.

Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.

Spare parts for the FAZER MK2

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for Optima Mid

Spare parts for the MP10T

Front shock spring (70mm) for INFERNO MP10/MP9

Spare parts for the Ultima

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

Optional parts for the INFERNO MP9/MP10. 
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.

■サイズ：420×240×330mm

■Length: 395mm 
■Width: 240mm 
■Height: 120mm 
■Ground Clearance: 36mm 
■Wheelbase: 260mm 
■Tread (F/R): 204mm / 204mm 
■Tire(F/R): 86f x 40mm / 86f x 40mm 
■Gear Ratio: 9.24:1 
■Weight: approx. 1,600g 
■Motor: 540 class size 
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size 
■R/C System: 2 channel, 1-servo, ESC

Headlights and taillights light up, just by placing a compatible 1/64 scale miniature car model on the MOTN base. ※The miniature model alone will not light up.MOTN LED BASE SYSTEM >> MOTN compatible 1/64 scale die-cast car Show moreHeadlights and taillights light up, just by placing a compatible 1/64 scale miniature car model on the MOTN base. ※The miniature model alone will not light up.MOTN LED BASE SYSTEM >> ※Product specification subject to change.

※Product specification subject to change.

■Length 126mm
■Width 65mm
■Height 34mm
■Wheelbase 94（L）～98（LL）mm
■Tred (F/R) 65～76mm／65～76mm
■Tire (F/R) Φ25.0×8.5 mm／Φ25.0×8.5、11 mm（sold separately）
■Gear Ratio　6.4 / 6.0 / 5.7 / 5.3 / 5.0 / 4.5 : 1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)

＜SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Spur gears (27T / 29T / 31T)

●EVO2 compatible transmitter
●EVO2 compatible receiver unit
●Auto Scale Collection (body, wheels and tires)
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm／Φ86×23mm
■Gear Ratio 13.80：1～19.30：1
■Weight 750g  (approx.)
■Motor Le Mans DM20

<Kit Content>
●Chassis kit
●Pinion gear (10T, 12T, 14T)

<Required to run>
●2ch R/C system
●Batteries for transmitter
●servo×1 (Recommended: NoGPW20)
●ESC×1 (Recommended: No.GPW17)
●Battery for chassis（7.2V-1600mAh Ni-MH)
●Charger for battery 
●Charger Convert Connector
●Grease（Recommended:No.96508)
●Paint
●Tool

●Scale: Approximately 1/28 scale
●Product size：L181 x H46 x D71（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：433g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older

<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder

<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)

Spare parts for the Fazer D2 chassis

■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R) Φ97mm ×48mm
■Gear Ratio 9.51：1
■Weight 3,820g（approx. ）
■Motor　KYOSHO SPEED HOUSE TORX8+ brushless motor(kv2300)
■Transmitter　Syncro KT-331P

<Readyset Contents>
●Pre-assembled chassis with 2-channel, 1-servo, ESC R/C system installed
●Pre-painted body complete with decals applied
●KYOSHO SPEED HOUSE TORX8+ brushless motor installed
●KYOSHO SPEED HOUSE BRAINZ 8 ESC installed
●Syncro KT-331P transmitter
●Hexagonal wrench: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●Battery for chassis
●Charger for battery
●4 x AA-size batteries for transmitter

Spare parts for MR-04 EVO2

Spare parts for MR-04 EVO2

■Length 490mm
■Width (Body width * excluding mirror) 208mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tool

Spare parts for OPTIMA MID

Spare parts for MAD WAGON

New light weight 45T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.

Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).

Durable steel front center shaft cup. Precision CNC machined for heavy duty use.

Spare Part for Ultima

Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.

Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

Spare parts for the Nitro Tracker

Spare parts for the MP10T

Spare parts for the MP10T

New Light weight long shock bushings sets the shock 3mm to the rear. This angle on the rear shocks improves the shock movement performance drastically and increases traction.

Spare parts for MP10

Spare parts for MP10
Newly designed upper plate delivers improved front traction and steering performance.

Spare parts for MP10
The optimized Ackerman in the MP10 delivers an increase in lock-to-lock steering travel. The design of the new reinforced tie rod ends doesn’t interfere with the inside of the tire and wheel when steering is at maximum angle.