There are 1601 products.
Active filters
FAW241 Rally Spring...
FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.
※You need to purchase two to make one unit.
Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2
Price
$24.00
FAW215 +5mm HD Wheel Hub...
Optional parts for FAZER FZ02-R.
※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.
Price
$96.00
FAW311 Adjustable Aluminum...
Designed for 1/10 RWD drift cars. Optional parts for the FAZER D2 drift car. The standard servo horn is made of resin, but upgrading to a CNC-machined aluminum version significantly enhances steering response and holding strength. Additionally, the adjustable design allows fine-tuning of the steering feel by adjusting the arm length from 17mm to 21mm. FAW310 is compatible with Kyosho and Futaba, while FAW311 is compatible with Sanwa and KO.
Price
$40.00
37061 Low Profile Servo LE...
Size：40.5×26.5×21mm(Low Profile type）
Weight：42.1g
Power Supply：6.0～7.4V
Speed：0.08sec/60°(7.4V) 0.09sec/60°(6.0V)
Torque：8.2Kg・cm(7.4V) ７.0Kg・cm(6.0V)
<Contents>
●Servo×1
●Grommet
●Horn set screw
●Instruction Manual
Price
$149.00
MZP482ID NISSAN SKYLINE...
※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED light unit set (No.MZW429R) can be installed on the NISSAN SKYLINE GT-R R32 V-SPECⅡ.
Price
$124.00
MZP479ID ASC MA020 Toyota...
*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Sprinter Trueno AE86.
Price
$124.00
IFW609C Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for Futaba servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
$40.74
EFW012 Ride Hight Adjust...
Ride height adjustment spacers for the Fantom EP 4WD and EXT. Can be installed in the front and rear between the axle mount and chassis. Allows 2 different(0.5mm / 1.0mm) lower positions.
Price
$24.22
OTW146 Aluminum Servo Mount...
High-precision, high-rigidity CNC machined 6061T6 aluminum servo mount.
Price
$36.33
MZW432B MINI-Z Rear Oil...
Controls rear pitching to minimize vibration. Delivers strong direct line running as well as cornering. (Includes silicon oil)
* This product is not compatible with the MM2 motor case
Price
$30.28
KOS-LTS01BG KYOSHO Box Logo...
All-season KYOSHO long T-shirt with KYOSHO logo
From RC action to urban style, this long T-shirt is a personal statement for any scene. Made by Printstar with heavyweight 5.6-ounce high-quality 100% cotton, the sleeves have a clean silhouette without ribs.
Price
$55.51
OTW137 HD Rear Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product.
Price
$67.23
MZP242GM ASC MR03W-MM...
Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
Price
$112.06
R246-8522 2P Super Plug A...
A set of 5 male 24K gold-plated 2P plugs that have become a standard for electric power.
■ We adopt 24K gold plating plating.
■ A Type (male), 5 pieces.
■ Comes with shrink tube in each color of black and red.
Price
$8.15
34471T1 Toyota Supra (A80)...
■Length 455mm
■Width（Body width） 200mm（210mm）
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ64×24.2mm／R：φ64×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
Price
$301.77
IFW628 Carbon Radio Plate
Carbon Radio plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
$81.50
IFW629B Aluminum Front Hub...
22 degrees caster angled Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.
Price
$199.66
EFW005 Carbon Suspension...
Carbon Front Suspension Arm for the FANTOM EP 4WD. Allows weight reduction and increased rigidity around front parts by replacing FRP upper and lower suspension arms, improves initial steering reaction.
Price
$48.90
97054-4R-B LED Light Unit...
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
$24.45
97054-2B LED light unit (Φ5...
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
Price
$16.30
UTW003 Carbon Rear Shock...
CNC machined rear shock stay for the Ultima. Using a hybrid material in which FRP is sandwiched with carbon, proper hardness to improve durability.
High machining accuracy and rigidity shock stay allows suitable setting of shock.
Price
$44.82
IFW615 HD Cap C-Universal...
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Price
$48.90
W5202YB Rear...
New IFMAR legal wheels with 5mm wheel shaft diameter. The wheel is 1mm outwards complying with the regulations. 2mm narrower than the previous configuration.
Price
$12.22
FAW209B HD TC Center Shaft...
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Price
$18.00
