There are 10144 products.
■Length 385mm
■Width 248mm
■Height 145mm
■Wheelbase 278mm
■Tread (F/R) 210mm／200mm
■Tire (sold separately)
■Weight 1,650g (approx.)
■Motor (sold separately)
＜ Kit Contents ＞
●Unassembled kit set（Body, wheels, and logo decals included）
●Hex wrench（1.5mm/2.0mm/2.5mm）
●Cross wrench
●Teflon grease
<Requirement to run>
■2ch-3ch R/C car transmitter
■Servo
■ESC
■Motor
■Pinion Gear
■Tire
■Tire inserts
■Shock Oil
■Diff Oil
■Batteries for receiver
■Charger for battery
■Tool
■Paint for body
■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (can be changed with rear hub collar)
■Tread (F/R) 254mm
■Tires (F/R) φ116×44mm
■Weight 3,370g (approx..)
■Motor KYOSHO SPEED HOUSE TORX 8 Brushless Motor
<Readyset Contents>
●Completed chassis with R/C radio installed
●Pre-cut and colored printed body
●KYOSHO SPEED HOUSE brushless motor & ESC installed
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5, 3.0mm L type hexagonal wrench
●Cross wrench (large)
●17mm wheel wrench
<Required for Operation>
●4 x AA batteries for transmitter
●2 x batteries for chassis
●Charger for batteries for chassis
●Regulated power supply
※This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※The separately sold LED Light Unit Set (No. MZW429R) can only be installed on the front of the McLaren 12C GT3 2013.
MM type aluminum motor mount for the MR-03. The rigid one-piece design holds the pitching shock firmly without play. 4-step ride height adjustment and slide backlash adjustment realize wider and finer setting options. This high-precision machine cut aluminum motor mount weighs only 6.7g while cooling down the motor efficiently.
Friction type pitching damper. Damping effect can be adjusted by viscosity of silicone oil or grease applied.
Carbon rear suspension plate for MM/LM/MM2. Contains 3 pcs of soft plates.
Carbon light weight rear shock towers for FZ02/02L chassis. Durable light weight shock towers allows 4 shock setting adjustments.
Carbon light weight front shock towers for FZ02/02L chassis. Durable light weight shock towers allows 4 shock setting adjustments
Long King Pin for MP9 (EP/GP). Essential parts for racing to prevent knuckle arm from dropping during a hard crash. ※Spare/Option parts for MP9 series.
■Length 496mm
■Width 206mm (Body width * excluding mirror)
■Height 142mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
■Length 500mm
■Width 211mm(Body width * excluding mirror)
■Height 130mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1650g (approx.)
■R/C system Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Spare parts for the TURBO OPTIMA.
Optional parts for the OPTIMA and JAVELIN.
Shock gasket for 10mm oil shocks of Scorpion series. Contains 4 pieces.
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren Senna GTR.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
CNC machined 2.5mm thick carbon front and rear suspension plate, rear side plate set. Lighter and much stronger than normal aluminum
Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
■Length 455mm
■Width（Body width） 200mm（210mm）
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ64×24.2mm／R：φ64×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Spare part for the Mad Van VE. It can be used on the standard Mad Van(34412T1) as an option. Durable sintered metal materila.
Sintered 76T Spur gear for the Mad Van VE. Good optional part for the Mad Van.
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Handy multiuse case with a MINI-Z logo.
Comes with an internal tray with separating plates for flexible space arrangement.
It can also be used as a storage/protection box for an on-road type MINI-Z (see below for maximum dimensions).
Dimensions: approx. 201 x 108 x 52mm
Maximum MINI-Z size: approx. 187 x 95 x 48mm
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
Front shock stay (5.0mm thick) for the INFERNO MP9 TKI4 V2/MP9e Evo. V2 Readyset
