Spare parts for the INFERNO NEO 3.0

■Length　1300mm
■Width　1600mm
■Weight　EP/2,550g (approx.), GP/2,450g (approx.)
■Motor　600-1000W BL Motor (sold separately)
■Engine　2 Cycle 40-46 class engine (sold separately)
■Battery (EP)　14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area　 44dm2
■Wing Loading　55.7-55.9g/dm2
■Airfoil 　Original semi-symmetrical
■Propeller size　D11 x P7-D12 x P8 (sold separately)
■Tire size　Nose 60mm / Main 60mm
■Dihedral　2.5°
■Side Thrust　2°
■R/C system (EP)　4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP)　4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

*Scale: 1/27.6 *Length: 126.0mm *Width: 65.0 - 76.0mm (adjustable by wheel offset) *Height: 36.0mm *Chassis Type: MA-030 *Wheelbase: 94.0mm (only with strut rear suspension installed), 98.0mm (factory assembled) *Weight: 135g *Brushless 8500KV *Gear Ratio: 7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1 *Tire Diameter (F/R): sold separately *Tire Width (F): sold separately *Tire Width (R): sold separately *Transmitter: sold separately *Top speed: approx. 17km/h *Runtime: approx. 50min.

■Length 561mm
■Width 262mm（with body）
■Height 231mm（with body）
■Wheelbase 335mm
■Tread （F/R） 204mm/204mm
■Tires （F/R interchangeable） φ108×38mm
■Gear Ratio 12.65：1
■Weight  2600g (approx.)

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD（MR-03） 
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 507mm
■Width 195mm(Body width:210mm)
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

Length　159.0mm 
Width　70.0mm
Height　45.0mm
Wheelbase　90(M)mm
Tread (F/R)　59.5mm／59.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Length　155.0mm
Width　71.0mm
Height　48.0mm
Wheelbase　90(M)mm
Tread (F/R)　58.5mm／58.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Length　155.0mm
Width　70.0mm
Height　50.0mm
Wheelbase　90(M)mm
Tread (F/R)　57.5mm／57.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Spare parts for the Ultima RB7

Spare parts for the Ultima RB7

Spare parts for the TURBO OPTIMA. Optional parts for the OPTIMA and JAVELIN.

Spare parts for the TURBO OPTIMA.  
Optional parts for the OPTIMA and JAVELIN

Option parts for Hang-on Racer

Spare Parts for DIRT HOG, Turbo Optima, Turbo Scorpion, Javelin

USB-powered quick charger compatible with AA and AAA nickel-metal hydride batteries.
71998 KYOSHO SPEED HOUSE 800HV Excellent compatibility with AAA nickel metal hydride batteries.

Compact AA / AAA NiMH charger powered by USB. Up to 1A charging per slot. USB power supply sold separately.

＜Chassis＞
■MINI-Z MR-03W-MM 
＜Technical Data＞
■Wheel Base：L（98mm）
■Wheel Off Set：F:N+2.5 R:W+3.0
■Wheel Width：8.5mm / R：11mm
■White Body No.：MZN195

■Length 158.0mm
■Width 72.0mm
■Height 43.0mm
■Wheelbase 98.0mm （LL）
■Tread F:61.5mm R:59.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow　+0.0mm(for RWD)
■Rear Wheel Offset Wide +0.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 166.0mm
■Width 78.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 484mm
■Width 195mm(Body width:210mm)
■Wheelbase 274mm 
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length  550mm  
■Width  427mm  
■Height  225mm  
■Wheelbase 355mm  
■Tread（F/R） 289mm / 289mm  
■Tires（F/R） Φ148×66mm / Φ143×66mm  
■Gear Ratio 14.6：1 
■Weight  3,750g approx.
■Engine  KE25SP
■Transmitter 2.4GHz Syncro KT-231P+

Light weight 3mm carbon fiber shock tower. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.

Spare parts for the TURBO OPTIMA.  
Optional parts for the OPTIMA and JAVELIN.

■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm/Φ86×23mm
■Gear Ratio 13.80：1～19.30：1
■Weight 750g (approx.)
■Motor Le Mans DM20

■Length  167mm
■Width  106mm
■Height  68mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

■Length  167mm
■Width  106mm
■Height  68mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires （F & R） φ150×70mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,700g (approx.)
■Engine KE25SP with recoil starter

■Length 　490mm
■Width 　307mm
■Height　180mm
■Wheelbase　325mm (can be changed with rear hub collar)
■Tread (F/R)　254mm
■Tires (F/R)　φ116×44mm
■Gear Ratio　12.6 : 1 (gear module : 1.0)
■Weight　3400g (approx..)
■Motor　KYOSHO SPEED HOUSE TORX 8 Brushless Motor

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires（F & R） φ150×70mm
■Gear Ratio 20.52：1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires （F & R） φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g(approx.)
■Motor Team ORION NEON 8 Brushless Motor

■Length　690mm (hull length 600mm)
■Width　178g
■Height　240mm
■Weight　1,300g approx.
■Motor　Water-cooled G20 
■Speed controller　Waterproof KA060-91W    
■Transmitter　Syncro KT-231P+
■Propeller　D42 x P1.4
■Servo　Waterproof KS4031-06W

■Length 460mm
■Width 200mm
■Wheelbase 260mm 
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm 
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 460mm
■Width 200mm
■Wheelbase 260mm 
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm 
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

For Hanging On Rider

■Length  117.7mm
■Width    F：70〜75mm／R：70〜76mm
■Height    35mm
■Wheelbase   98.0mm (LL)
■Tread      F：61.5〜66.5mm／R：61.5〜65mm 
■Tires (F/R)     φ25×8.5mm (sold separately)/φ25×8.5〜11mm (sold separately)
■Gear Ratio     7.3、6.3、5.5、4.9：1
■Weight           g (approx.)
■Motor      KYOSHO SPEED HOUSE/12000KV Brushless Motor

■Length  166.0mm
■Width  70.0mm
■Height  52.0mm 
■Wheelbase 98.0mm （LL）
■Chassis FWD（MA-03F） 
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P

■Length  166.0mm
■Width  70.0mm
■Height  52.0mm 
■Wheelbase 98.0mm （LL）
■Chassis FWD（MA-03F） 
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

■Length   390mm
■Width    281mm
■Height      165mm
■Wheelbase   274mm 
■Tread (F/R)     F：235mm／R：235mm
■Tires (F/R)     F：φ105×52mm／R：φ105×52mm 
■Gear Ratio     10.49：1
■Weight        2080g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length   486mm
■Width    200mm
■Wheelbase   274mm 
■Tread (F/R)     F：174mm／R：174mm
■Tires (F/R)     F：φ66×25mm／R：φ66×25mm 
■Gear Ratio     6.5：1
■Weight        1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 385mm
■Width 248mm
■Height 145mm
■Wheelbase 278mm
■Tread（F/R） 210mm / 200mm
■Tires（F/R） Sold separately
■Gear Ratio 2.5：1（2nd）
■Weight 1,650g (approx.)
■Motor Sold separately

■Length 395mm
■Width 249mm
■Height 148mm
■Wheelbase 277mm 
■Tread（F/R） F：221mm/R：201mm
■Tires（F/R） Sold separately
■Gear Ratio 1st Deceleration：Spur 76T／Pinion Gear sold separately 2nd Deceleration：2.6：1
■Weight 1,550g (approx.)

14.5cm x 4.5cm x 0.3cm

Double side tape is ideal for attaching 8.5mm wide tires and wheels.

Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.

Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm

Parts set for extending wheelbase of AWD Sports to LL. Now compatible with bodies for LL size wheelbase.
※Requires optional spur gear set (for AWD DWS)/No.MDW100-04

Precision machined aluminum high capacity oil shock. Provides smooth and reliable damping force, eliminates bounce from jump landings and ensures stability over rough terrain.

Spare parts for MP10

Spare parts for MP10

Spare parts for MP10
Not only does the new 2017S grade engine mount increase rigidity, it improves pitching characteristics and reduces flex of the chassis through jumps.

Spare parts for MP10
The CNC machined 3mm thick 7075 aluminum main chassis is hard anodized (true hard anodizing) to produce a much harder surface for high strength and durability.

Option parts for INFERNO MP9 series.

This steel sprocket offers great durability as well as high precision.

※Old Parts #：KC45 / 97014

Receiver unit for the MINI-Z EVO chassis. Supports the Futaba 7PX and 7XC transmitters.