There are 1325 products.
Active filters
MZW39-30 MINI-Z Low Height...
Use for front tires on MINI-Z Racer and MINI-Z AWD. Reduces sticking on urethane surfaces for smooth running characteristics.
Price
SGD12.22
MZW429R LED Light Clear &...
LED light unit set equipped with two white LEDs on the front and two red LEDs on the rear.
Compatible with the following models:
- MINI-Z RWD
- MINI-Z FWD
- MINI-Z AWD (with KT-531P transmitter)
- MINI-Z 4x4
- MINI-Z Buggy (with KT-531P transmitter)
- MINI-Z Buggy VE (FHSS)
- MINI-Z Sports series
Price
SGD16.30
- New
IFW636 3PC HD LW Aluminum...
Option part for the INFERNO MP10, MP10 TKI2, and MP10T.
Lower weight than the existing aluminum clutch shoes, but stronger acceleration with the refined engagement surface.
Two types of clutch springs, Φ0.9 and Φ0.95 are available for a wider range of clutch settings.
Price
SGD36.33
IFW339B 3PC HD Aluminum...
Compared to conventional 3pc clutch shoes, durability is greatly improved More accurate for clutch on & off by material change. ※Option parts for INFERNO series.
Price
SGD40.37
- New
- New
34429T1 1/10 RC EP 4WD...
■Length 460mm
■Width 201mm(Body width * Excluding mirrors)
■Height 140mm
■Chassis Height 7mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1,650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
SGD352.23
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
SGD28.00
- New
IFW473 Brake Pad (MP9)
Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.
Price
SGD38.71
IFH006WH Hard Dish Wheel...
Optional parts for the INFERNO MP9 Series.
Hard type wheel of existing IFH006 Dish Wheel.
It tends to have a stable running when exiting corner and acceleration.
You can select the wheel depending on racing track and you wish.
Price
SGD36.67
- New
IF625SSC Front Lower Sus....
Softer front lower suspension arms for the MP10/10e. Forgiving and withstands impacts with the softer material. Suitable for rough tracks.
Price
SGD28.51
IF625SC HD Front Lower Sus....
Setting parts for the INFERNO MP10.
Improved rigidity and strength by adding ribs for front suspension arm.
Price
SGD28.51
30623 1/10 EP 4WD Racing...
■Length 397mm
■Width 250mm
■Height 135mm
■Wheelbase 273mm
■Tread（F／R） 212mm / 208mm
■Weight approx 1620g (with 7.2V4000 LiPo）
■Tires（F／R） φ82×30mm / φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1
<Kit Contents>
●Chassis
●Tire
●Wheel
●Clear body＆underbody
●Decals
●Hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●#200Shock oil
●Ball Differential Grease
＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L41xW21xH38mm
●540Motor
●ESC
ESC size：L40xW42xH29.5mm
●Battery for chassis
Battery size:L140xW50xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body
Price
SGD659.00
- New
34117 1/8 EP 4WD INFERNO...
■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R) Φ97mm ×48mm
■Gear Ratio 9.51：1
■Weight 3,820g（approx. ）
■Motor KYOSHO SPEED HOUSE TORX8+ brushless motor(kv2300)
■Transmitter Syncro KT-331P
<Readyset Contents>
●Pre-assembled chassis with 2-channel, 1-servo, ESC R/C system installed
●Pre-painted body complete with decals applied
●KYOSHO SPEED HOUSE TORX8+ brushless motor installed
●KYOSHO SPEED HOUSE BRAINZ 8 ESC installed
●Syncro KT-331P transmitter
●Hexagonal wrench: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench
<Required for Operation>
●Battery for chassis
●Charger for battery
●4 x AA-size batteries for transmitter
Price
SGD849.00
34412T2 MAD VAN Color Type2...
■Length 383mm(Including body)
■Width 323mm(Including body)
■Height 200mm(Including body)
■Wheelbase 274mm
■Tread (F/R) 250mm
■Tires (F/R) φ110×70mm
■Gear Ratio 11.69:1
■Motor G14L
■Weight 2,050g (approx.)(When using 7.2V3600 NiMH)
<Readyset Contents>
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–231P+ transmitter
●Hex wrench
●Integrated spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
SGD324.96
IS205H Rear Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
SGD28.52
IF605 Hard Rear Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
SGD112.06
- New
FAW210 HD Center Shaft L...
CNC machined aluminum center shaft for FZ02L chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Price
SGD14.26
MDW201 Front Spring Set(for...
Front spring set for MINI-Z AWD MA-020. Green is standard spring rate. Includes 5 types for useful settings.
Price
SGD20.37
