There are 2476 products.
Spring set is softer and 0.5mm shorter than MZW401. Delivers superior performance when combined with MZW415 aluminum upper arm and MZW416 inner tube shock. Includes 5 types.
Light weight 2.5mm and 2.0mm suspension plates. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.
- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Spare parts for Mad Force / FO-XX / Mad Crusher.
MINI-Z FWD main chassis equipped with gold plated battery termials, which have lower electric resistance.
Reciver unit for the MINI-Z EVO chassis.
Supports the KT-531 and KT432PT transmitters.
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
CNC machinedC aluminum motor mount. Red anodied motor mount fits all Fazer Mk2 chassis
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Optional parts for the Fazer MK2 and the FZ02. High precision machined servo saver. Improves the steering feel for accurate operation.
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
27.72：1/39.60：1/34.65：1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
27.72：1/39.60：1/34.65：1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.
＜ Kit Contents ＞
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder
＜ Required for Operation ＞
●AA batteries x 4 for transmitter
Aluminum knuckles. Provides increased rigidity and better appearance.
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
■Length 472mm
■Width 350mm
■Height 198mm
■Wheelbase 295mm
■Tread F/R 278mm
■Tires（F & R） φ128 x 70mm
■Gear Ratio 15.22：1
■Weight 3,610g (approx.)
■Motor TORX10L Brushless Motor kv2850
<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner
<Required to operate>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
2-Speed Transmission gear unit for the Inferno GT2 series.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
