Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.

<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2

Spare parts for MR-04 EVO2

■Length 126mm
■Width 65mm
■Height 34mm
■Wheelbase 94（L）～98（LL）mm
■Tred (F/R) 65～76mm／65～76mm
■Tire (F/R) Φ25.0×8.5 mm／Φ25.0×8.5、11 mm（sold separately）
■Gear Ratio　6.4 / 6.0 / 5.7 / 5.3 / 5.0 / 4.5 : 1
■Weight 135g (approx.)
■Motor KYOSHO SPEED HOUSE XSPEED 85 (KV8500)

＜SET CONTENTS＞
●Factory-assembled chassis equipped with EVO main unit installed
●Pinion Gears (15T, 17T, 19T, 21T)
●Pinion gear removal tool
●Spare wheel nuts
●Wheel wrench
●Center shaft for L wheelbase
●Spur gears (27T / 29T / 31T)

●EVO2 compatible transmitter
●EVO2 compatible receiver unit
●Auto Scale Collection (body, wheels and tires)
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter

KIT ONLY

■Length 370mm
■Width 250mm
■Height 130mm
■Wheelbase 260-263mm
■Tread F:208mm / R:214
■Weight approx 1500g(with 7.2V4000 LiPo）
■Tires F: φ75×20mm / R: φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.64：1

<Kit Content>
●Kit chassis
●Tire
●Wheel
●Clear body
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
●Ball Diff Grease

＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L42xW21xH38mm
●540Motor
●ESC
ESC size：L45xW38xH27mm
●Battery for chassis
Battery size：L140xW47.5xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body

BATTERY AND CHARGER SOLD SEPERATELY

■Length 405mm
■Width  230mm
■Height 140mm
■Wheelbase 270mm
■Tread（Ｆ／Ｒ） 190mm
■Tire（Ｆ／Ｒ） φ100×36mm
■Gear Ratio  8.76:1
■Weight  1,700g  (approx.)
■Motor  540class

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Required to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

BATTERY AND CHARGER SOLD SEPERATELY

■Length 410mm
■Width 230mm
■Height 180mm
■Height 270mm
■Tread (F/R) 190mm
■Tire (F/R)  φ100×35mm
■Gear Ratio  8.76:1
■Weight 約1,880g（approx.）
■Motor  540class G22

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Require to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

BATTERY AND CHARGER SOLD SEPERATELY 

■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R) Φ97mm ×48mm
■Gear Ratio 9.51：1
■Weight 3,820g（approx. ）
■Motor　KYOSHO SPEED HOUSE TORX8+ brushless motor(kv2300)
■Transmitter　Syncro KT-331P

<Readyset Contents>
●Pre-assembled chassis with 2-channel, 1-servo, ESC R/C system installed
●Pre-painted body complete with decals applied
●KYOSHO SPEED HOUSE TORX8+ brushless motor installed
●KYOSHO SPEED HOUSE BRAINZ 8 ESC installed
●Syncro KT-331P transmitter
●Hexagonal wrench: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●Battery for chassis
●Charger for battery
●4 x AA-size batteries for transmitter

■Length  167mm
■Width  106mm
■Height  56mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

＜Readyset Contents＞
●Factory assembled chassis with pre-installed R/C unit
●KT-531P transmitter
●Pre-painted polycarbonate body finished with markings
●Pinion gears (11T, 13T, 15T)
●Spur gears (33T, 35T)
●Pinion gear tool
●Pairing stick
●Wheel wrench
●Spare nuts for wheels

＜Required for operation＞
●AAA alkaline batteries x 4 or NiMH batteries x 4 for chassis
●AAA alkaline batteries x 4 for KT-531P transmitter

■Length 460mm
■Width 201mm(Body width * Excluding mirrors)
■Height 140mm
■Chassis Height 7mm(approx.)
■Wheelbase 260mm
■Tread (F/R)  167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1,650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.

FAZER Optional parts for Mk2 FZ02-R.
Setting parts for adjusting grip in response to vehicle setup and road surface conditions. Contains 2 pieces of each of 3 types: Soft, Medium (equivalent to standard), and Hard.
Coil inner diameter: 16.5mm, overall coil length: 44mm, wire diameter: 1.1mm.

※You need to purchase two to make one unit.

Contents
Soft (pink / total 9 rolls) ×2
Medium (yellow / total 8 rolls) ×2
Hard (blue / total 7 rolls) ×2

Ball differentials for the Fazer Mk2. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs have smoother cornering and more stable accelaration feel. Requires 2pcs for 1 chassis. Includes ball diff grease and Molybden grease.

Optional parts for FAZER FZ02-R.

※When used with the FZ02L-BT series, please also use Button Screws (M4x22) (Hex/5 pcs) part No. 1-S14022H.

Spare parts for the Fazer D2(Short size). The body mount is for the short size Fazer D2 body types. Standard overhang bodies will require the FA617 body mounts.

Spare parts for the Fazer D2 chassis

Spare parts for the Fazer D2 chassis

Spare parts for Ultima RB7.5.

Light weight shock bushings designed to use with the carbon shock towers(IFW631/IFW632). Not to be used with the aluminum shock towers.

Designed for 1/10 RWD drift cars. Optional parts for the FAZER D2 drift car. The standard servo horn is made of resin, but upgrading to a CNC-machined aluminum version significantly enhances steering response and holding strength. Additionally, the adjustable design allows fine-tuning of the steering feel by adjusting the arm length from 17mm to 21mm. FAW310 is compatible with Kyosho and Futaba, while FAW311 is compatible with Sanwa and KO.

1/10 RWD. Optional parts for the drift car FAZER D2.
The standard servo horn is made of resin, but by using machined aluminum, the response and holding power of the steering have been greatly improved.
Additionally, the steering feel can be adjusted by changing the distance between 17mm and 21mm.

FAW310 is for Kyosho and Futaba, while FAW311 is for Sanwa and KO.

Spare parts for the Fazer D2 chassis

Spare parts for the Fazer D2 chassis

Spare parts for the Fazer D2 chassis

*Autoscale alone cannot run. Also, some bodies cannot be mounted on certain chassis.
*The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Sprinter Trueno AE86.

Optional parts for MR-04.

Optional parts for FAZER Mk2 FZ02-R

Optional parts for MR-04 EVO2

Optional parts for Inferno MP10/MP10e/MP10T/MP10Te