Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.

Size: 35.8x51.2mm
Shaft size: 3.175x17mm
Weight: Approximately 180g
Number of turns: 21.5T
Operating voltage: Max 12.8V (2 to 3S LiPo compatible)
kv value: 1950 (rpm / V)
Maximum rotation speed (at 7.4V) : 14430rpm
Maximum current: 30A
Maximum output: 260W
Maximum efficiency: 91%

■Length 461mm
■Width 210mm
■Height 135mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 1300mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F : 68.5mm R : 65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread  F : 68.5mm R : 66.0mm
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 345mm
■Width 172mm
■Height 83mm
■Chassis type　Chain drive4WD
■Wheelbase 199-200mm（Adjustable）
■Front tread 135mm
■Rear tread 133mm　
■Weight approx.1,500g(with GAB4201）
■Motor 540class（both sold separately）
■1st gear ratio 3.38：1
■Front tire diameter φ48
■Rear tire diameter φ53
■Front tire width 23mm
■Rear tire width 35mm
■Used propo 2～3ch 2servo
■※Maximum Speed 約55km/h (with Le Mans480T BL）
■※Driving Time approx.23minutes(with Le Mans480T BL）

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 177mm
■Width 78mm
■Height 47.5mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm (for RWD)
■Rear Wheel Offset Wide +3.0mm (for RWD)
■R/C System Syncro KT-531P

■Length 464mm
■Width（Body width） 200mm（207mm）
■Height　126mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm
■Gear Ratio 6.5：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

■Length 178.0mm
■Width 80.0mm
■Height 45.0mm
■Wheelbase 102.0mm（3L）
■Tread F : 68.5mm R : 65.0mm
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +3.5mm
■Front Wheel Offset Wide +1.0mm
■R/C System Syncro KT-531P

■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (Can be changd by replacing rear hub collars）
■Tread(F/R) 254mm
■Tires(F/R) (sold separately)
■Gear Ratio 10.87 : 1　Pinion 14T
■Weight 3,650g (approx.)
■R/C system 2～3ch (sold separately)

Domestic limited number: 150

■Length 174.0mm
■Width 75.0mm
■Height 45.5mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD（MR-03）
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

■Length 463mm
■Width 220mm
■Height 129mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

Meet the small brother of the successful Pulsar Pro charger. The Pulsar Sport has everything that you need for your battery management. The integrated power supply allows you to directly connect it either to
a AC wall socket or to DC sources like car batteries. You don’t need a separate power supply anymore.

Of course, the currently highly sought after HV LiPo battery packs with up to 8.7V (2S) charging are no problem for the Pulsar Sport. It supports LiPo HV charging, making it fully prepared for any future tasks.

Like with all current LRP chargers, the Pulsar Sport also offers a USB charge port (5V/1.0A) that is suitable for smartphones and MP3 players.

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                     39.60：1/34.65：1/34.65：1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
                     27.72：1/39.60：1/34.65：1 　
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h  (Pinion gears 10T〜 20T) 
■Running Time Approx. 60 mins

■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
                     27.72：1/39.60：1/34.65：1 　
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h  (Pinion gears 10T〜 20T) 
■Running Time Approx. 60 mins

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx.

■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 383mm
■Width 323mm
■Height 200mm
■Wheelbase 273mm
■Tread (F/R) 250mm/250mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.69:1
■Motor 550 size G14L
■Weight 2,050g (approx.)(When using 7.2V3600 NiMH)

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

Spare parts for the Ultima

■Length　163mm
■Width　105mm
■Height　46mm
■Wheelbase　115mm
■Tread（Ｆ/Ｒ）　89mm/89mm
■Tires（Ｆ/Ｒ）　Sold Separately
■Weight　200g approx.
■Motor　SPEED HOUSE XSPEED 85 (8500KV)

＜Chassis＞
■MINI-Z MA-020-N
＜Technical Data＞
■Wheel Base：M（90mm）
■Wheel Off Set：F:N+2.5 R:W+-0.0 
■Wheel Width：F：8.5mm（Drift） / R：11.0mm（Drift）

■全長 117.7mm
■全幅 70～76mm
■全高 35mm
■ホイールベース 98.0mm（LL）
■トレッドF：61.5～63.0mm／R：61.5～63.0mm
■モーターマウント MM2
■タイヤ（F／R） φ25×8.5mm（別売）／φ25×8.5〜11mm（別売）_
■ギヤレシオ 7.3、6.3、5.5、4.9：1
■全備重量 約135g （ボディなし）
■モーター KYOSHO SPEED HOUSE / XSPEED 56 (5600KV)

1,000 limited

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

■Length: 945mm
■Width: 230mm
■Weight: 2,350g
■Motor: KYOSHO SPEED HOUSE TORX M6 water-cooled brushless motor (40x68mm, KV1250)
■Battery: 2 x 3 cell 11.1V-3600-4000mAh LiPo battery (Super Plug specification, sold separately)
■R/C System: Perfex KT-231P+
■Propeller: D40×P1.4（3-blade）
■ESC : KYOSHO SPEED HOUSE KA120-91WC 120A water-cooled, waterproof brushless ESC

■Length: 900mm
■Width: 187mm
■Height: 140mm
■Weight: 1,780g (when 14.8V-4000mAh installed)
■Motor: Pre-installed KYOSHO SPEED HOUSE TORX M4 Brushless water-cooled motor (40x68mm, KV2000)
■Battery: 4 cell 14.8V 3600-4000mAh LiPO (Super Plug specification, sold separately)
■Propeller: Carbon reinforced nylon D40 x P1.4 (3-blade)
■ESC: Pre-installed KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled, waterproof brushless ESC
■Servo: KS-4031-06W

■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor G22（22ターン）
■Weight 1900g (approx.)

■Length 410mm
■Width 300mm
■Height 175mm
■Wheelbase 270mm
■Tread (F/R) 230mm/230mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.27:1
■Motor G22（22ターン）
■Weight 1900g (approx.)

■Length 496mm
■Width 307mm
■Height 189mm
■Wheelbase 323～328mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ115×44mm／φ115×44mm
■Gear Ratio 12.7：1
■Weight 3,550g (approx.)
■Transmitter 2.4GHz Syncro KT-231P+

■Length 496mm
■Width 307mm
■Height 189mm
■Wheelbase 323～328mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ115×44mm／φ115×44mm
■Gear Ratio 12.7：1
■Weight 3,550g (approx.)
■Transmitter 2.4GHz Syncro KT-231P+

■Length 169.0mm
■Width 73.0mm
■Height 49.0mm
■Wheelbase 90.0mm（M）
■Tread F : 61.5mm R : 59.0mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +2.5mm
■Front Wheel Offset Wide +-0.0mm
■R/C System Syncro KT-531P

■Length 161.0mm
■Width 72.0mm
■Height 52.0mm
■Wheelbase 94.0mm（L）
■Tread F : 61.5mm R : 59.0mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +2.5mm
■Front Wheel Offset Wide +-0.0mm
■R/C System Syncro KT-531P

■Length 177.0mm
■Width 76.0mm
■Height 44.0mm
■Wheelbase 98.0mm（LL）
■Tread F:64.5mm R:62.0mm
■Chassis RWD（MR-03）
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide ++1.5mm
■R/C System Syncro KT-531P

■Length: 370mm
■Width: 244mm
■Height: 106mm
■Wheelbase: 260-263mm
■Tread (F/R): 206mm / 208mm
■Tire(F/R): 75f x 20mm / 82f x 36mm
■Gear Ratio: 8.64:1
■Weight: approx. 1,500g
■Motor: 540 class size

Length　167.0mm
Width　70.0mm
Height　52.0mm
Wheelbase　98(LL)mm
Tread (F/R)　59.5mm／59.5mm
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 5.71, 5.97, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

■Length 158.0mm
■Width 71.8mm
■Height 44.5mm
■Wheelbase 94.0mm （L）
■Tread Narrow
■Chassis RWD (MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +1.0mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

Kyosho 1/64 Nissan GT-R 50th Anniversary 4 cars set (R32, R33, R34, R35)

■Length 515mm
■Width 310mm
■Height 135mm
■Wheelbase 360mm
■Tread（Ｆ／Ｒ） 262mm／265mm
■Tire（Ｆ／Ｒ） Φ97mm ×40mm
■Gear Ratio 1st gear /10.14:1　2nd gear /7.49:1
■Weight 3,650g（approx. with body）
■Engine　KE25SP
■Transmitter　Syncro KT-331P

■Length 515mm
■Width 310mm
■Height 135mm
■Wheelbase 360mm
■Tread（Ｆ／Ｒ） 262mm／265mm
■Tire（Ｆ／Ｒ） Φ97mm ×48mm
■Gear Ratio 8.95：1
■Weight 3,650g（approx. with body）
■Motor　KYOSHO SPEED HOUSE TORX8 brushless motor
■Transmitter　Syncro KT-331P

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.5mm(for RWD)
■R/C System Syncro KT-531P

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.5mm(for RWD)
■R/C System Syncro KT-531P

Body shell for Mini-Z

Body shell for Mini-Z

■Length 162.0mm
■Width 70.8mm
■Height 48.5mm
■Wheelbase 94.0mm （L）
■Tread F:59.5mm R:58.6mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow　+1.5(for RWD)
■Rear Wheel Offset Wide -0.8mm(for RWD)
■R/C System Syncro KT-531P

■Length 162.0mm
■Width 70.8mm
■Height 48.5mm
■Wheelbase 94.0mm （L）
■Tread F:59.5mm R:58.6mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow　+1.5(for RWD)
■Rear Wheel Offset Wide -0.8mm(for RWD)
■R/C System Syncro KT-531P

Spare parts for the TURBO OPTIMA.  
Optional parts for the OPTIMA and JAVELIN.

Spare parts for Javelin. Compatible with the Optima to use the Javelin roll cage body.

Spare linkage set for the Inferno MP10T. Compatible with the MP9 / MP10.

■Length 395mm
■Width 249mm
■Height 148mm
■Wheelbase 277mm 
■Tread（F/R） F：221mm/R：201mm
■Tires（F/R） Sold separately
■Gear Ratio 1st Deceleration：Spur 76T／Pinion Gear sold separately 2nd Deceleration：2.6：1

■Length  575mm
■Width  428mm
■Wheelbase 381-386mm
■Tread（F/R） 353mm／353mm
■Tires（F/R） For stadium track(not included)
■Gear Ratio 16.3:1
■Weight  3,870g approx.
■Engine .21 ～ .28 classes(not included)
■Transmitter 2ch or more 2 servo(not included)

■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow　+2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 168.0mm
■Width 79.0mm
■Height 46.5mm
■Wheelbase 98.0mm （LL）
■Tread F:65.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow　+2.0mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm 
■Tread 312mm
■Tires（F & R） φ155 x 70.5mm
■Gear Ratio 8.68：1
■Weight 4,650g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

■Length 545mm
■Width 383mm
■Height 248mm
■Wheelbase 360mm
■Tread 312mm
■Tires （F & R） φ155 x 70.5mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,200g (approx.)
■Engine KE25SP

■Length　418.5mm 
■Width　321mm 
■Height　194mm 
■Weight 2,650g(approx.)
■Wheelbase　298.5mm 
■Tread （F/R）　265mm
■Tires (F/R interchangeable)　φ120×56mm
■Gear Ratio　Forward (1st) 20.9:1 / (2nd) 13.9:1 
                        Reverse (1st) 24.1:1 / (2nd) 16.0:1 
■Engine　KE15SP with recoil

Body Shell for Mini Z