Technical data

TECHNICAL DATA

Cell chemistry  -  LiPo HV
C-rate  -  120C/60C
Length  -  139.0mm
Width  -  47.0mm
Height  -  17.5mm
Weight  -  215g (+/-4%)
Connectors  -  5mm
Homologated  -  ROAR, EFRA, BRCA

TECHNICAL DATA

Nominal voltage - 7.6V

C-rate - 45C

Style - Hardcase

Connector - US-Style

Balancing - connectorXH

Application - On/Offroad

Length - 137mm

Width - 47mm

Height - 25mm

Weight - 352g

Capacity - 9000mAh

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V 

chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

Features

Technical data

Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh

BATTERY AND CHARGER SOLD SEPERATELY

■Length 405mm
■Width  230mm
■Height 140mm
■Wheelbase 270mm
■Tread（Ｆ／Ｒ） 190mm
■Tire（Ｆ／Ｒ） φ100×36mm
■Gear Ratio  8.76:1
■Weight  1,700g  (approx.)
■Motor  540class

<Kit content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Required to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

FEATURES

LiPo power at a budget price from ANTIX by LRP.

These RC car LiPos are ideal for hobby and amateur drivers looking for power and durability at a budget price.

The special "stickpack" shape is based on the NiMh packs for which many chassis were designed.
Also for the new release of vintage models you get perfectly fitting batteries of the latest technology with 134mm length and additionally slightly offset cable exit, so the battery posts of your chassis do not get in the way.
Equipped with a robust hard case, these 2S LiPo batteries are suitable for tough On- and Offroad use.

KIT ONLY

■Length 370mm
■Width 250mm
■Height 130mm
■Wheelbase 260-263mm
■Tread F:208mm / R:214
■Weight approx 1500g(with 7.2V4000 LiPo）
■Tires F: φ75×20mm / R: φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.64：1

<Kit Content>
●Kit chassis
●Tire
●Wheel
●Clear body
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
●Ball Diff Grease

＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L42xW21xH38mm
●540Motor
●ESC
ESC size：L45xW38xH27mm
●Battery for chassis
Battery size：L140xW47.5xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body

BATTERY AND CHARGER SOLD SEPERATELY

■Length 383mm(Including body)
■Width 323mm(Including body)
■Height 200mm(Including body)
■Wheelbase 274mm
■Tread (F/R) 250mm
■Tires (F/R) φ110×70mm
■Gear Ratio 11.69:1
■Motor G14L
■Weight 2,050g (approx.)(When using 7.2V3600 NiMH)

<Readyset Contents>
●Factory assembled chassis with built in R/C unit
●Factory finished body with decals applied
●Syncro KT–231P+ transmitter
●Hex wrench
●Integrated spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

BATTERY AND CHARGER SOLD SEPERATELY

■Length 405mm
■Width  230mm
■Height 140mm
■Wheelbase 270mm
■Tread（Ｆ／Ｒ） 190mm
■Tire（Ｆ／Ｒ） φ100×36mm
■Gear Ratio  8.76:1
■Weight  1,700g  (approx.)
■Motor  540class

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Required to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

BATTERY AND CHARGER SOLD SEPERATELY

■Length 410mm
■Width 230mm
■Height 180mm
■Height 270mm
■Tread (F/R) 190mm
■Tire (F/R)  φ100×35mm
■Gear Ratio  8.76:1
■Weight 約1,880g（approx.）
■Motor  540class G22

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Require to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

BATTERY AND CHARGER SOLD SEPERATELY 

■Length 660mm
■Width 310mm
■Height 180mm
■Wheelbase 360mm
■Tread (F/R) 262mm／265mm
■Tire (F/R) Φ97mm ×48mm
■Gear Ratio 9.51：1
■Weight 3,820g（approx. ）
■Motor　KYOSHO SPEED HOUSE TORX8+ brushless motor(kv2300)
■Transmitter　Syncro KT-331P

<Readyset Contents>
●Pre-assembled chassis with 2-channel, 1-servo, ESC R/C system installed
●Pre-painted body complete with decals applied
●KYOSHO SPEED HOUSE TORX8+ brushless motor installed
●KYOSHO SPEED HOUSE BRAINZ 8 ESC installed
●Syncro KT-331P transmitter
●Hexagonal wrench: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench (large)
●17mm wheel wrench

<Required for Operation>
●Battery for chassis
●Charger for battery
●4 x AA-size batteries for transmitter

Power for the Sanwa MT-44! This Transmitter battery offers highest Performance. The VTEC LiPo TX-Pack is a true transmitter battery for Transmitters. Its dimensions perfectly match the size of the battery tray.

Weight-90g

Nominal voltage-7.4V

C-rate-RX-only

Dimensions-84x30x17mm

Capacity-2500

Balancing connector-XHR 3-pole

TECHNICAL DATA

Ideal weight for 1/10 TC racing combined with Low Center of Gravity design.
HV-LiPo Perfect car balance and power for tight tracks.

TECHNICAL DATA

TECHNICAL DATA

Meet the small brother of the successful Pulsar Pro charger. The Pulsar Sport has everything that you need for your battery management. The integrated power supply allows you to directly connect it either to
a AC wall socket or to DC sources like car batteries. You don’t need a separate power supply anymore.

Of course, the currently highly sought after HV LiPo battery packs with up to 8.7V (2S) charging are no problem for the Pulsar Sport. It supports LiPo HV charging, making it fully prepared for any future tasks.

Like with all current LRP chargers, the Pulsar Sport also offers a USB charge port (5V/1.0A) that is suitable for smartphones and MP3 players.

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

Go safe on runtime with our maximum capacity pack of the Shorty Lineup! 
Perfect for power hungry tracks (and drivers) and overtime races.

The battery for any situation where you need the maximum power over the whole run. Lowest IR in our StockSpec Line! 

Perfect for fast tracks if you can handle the weight - this pack will be your choice. 

HV LCG Modified GRAPHENE-3 Ideal weight for 1/10 touring cars combined with low center of gravity design and increased capacity. Perfect car balance and power for fast modified tracks.