- New
There are 4720 products.
Active filters
- New
- New
- New
- New
MZW709 Friction Damper Set...
For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.
Price
SGD96.00
IFW643 KPI Front Knuckle...
Optional parts for the 1/8 Inferno MP10 Buggy series. The standard knuckle has a kingpin angle of 0°, while this set features knuckles with 7°kingpin angle. This design reduces front tire catching, particularly in high-speed corners, allowing for higher cornering speeds. It also improves stability, enabling the vehicle to better absorb sudden movements caused by surface gaps or irregularities.
Price
SGD199.00
MZW437 FRP Rear Sus. Plate...
0.5mm-thick FRP rear suspension plate set. Contains soft, medium and hard plates. Softer than the MZW409, which is 0.6mm thick.
Price
SGD24.45
MZW403S Carbon Rear Sus....
Carbon rear suspension plate for MM/LM/MM2. Contains 3 pcs of soft plates.
Price
SGD26.48
MZW309 MJ Aluminum Motor...
Aluminum motor mount for the MR-03LM.
High precision machined product made in Japan.
Highly balanced left-right weight distribution contributes to superior traction.
The design supports the LL (98mm) wheelbase as well. Works best with the MZW310 Inner Tube Roll Shock Set.
Price
SGD162.99
IFW459C Servo Saver Assy...
Optional parts for the INFERNO MP9/MP10. Reinforced Servo Saver than existing one, increases the hardness and steering response.
Price
SGD52.97
IFW469B Aeration Cap...
Option Parts for INFERNO MP9
Shock cap set to change the existing MP9 damper to aeration type. For 1 car.
Features of the aeration type are excellent in absorbing gap of fine road surface, and improve the grip feeling and advancing force.
Price
SGD77.42
82278 Mini Servo KS3031-04M...
■Operating Voltage: 4.8-6.0V
■Size：L35.9mm W15.1mm H28.6mm
■Speed：0.13sec/60°
■Torque：4.5kgf・cm
■Weight：30g
■Led Wire：150mm
■Serration：25 / for FUTABA・KYOSHO
・Servo x1
・Horn A x1
・Horn B x1
・Horn C x1
・3ｘ5ｘ1mm Spacer x1
・Eyeletｘ4
・Screw 2.3x12mm x4
・Screw 2.6ｘ6ｍｍｘ1
・Grommetｘ4
Price
SGD84.78
MZW415B Aluminum Upper Arm...
Machined aluminum upper sus arm realizes direct spring effect.
Price
SGD80.74
MZW120OR Mini-Z SP tool...
Kyosho 60th anniversary limited model.
A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.
- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm
Price
SGD69.64
FAW205 HD Front hub...
Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linerar steering response and smooth suspensionmovement. Allows camber angle adjustments.
Price
SGD76.70
FAW206 HD Rear hub (FZ02/2pcs)
Option parts for the Fazer Mk2. CNC machined aluminum rear hubs allow smoother suspension movement. Allows 2 camber angle adjustments.
Price
SGD72.67
87615C KYOSHO Carrying Bag L
■Size
Overall：W360 X L560 X H550(mm)
Inner dimensions of one of the inner boxes：W325 X L505 X H160(mm)
■Carrying Bag for1/8
■Considerable materials for heavy duty use.
■Chic black color.
■Plastic cardboard for shelves
■Outside pocket equipped.
■Equipped with multipurpose slit and travel carrier.
Price
SGD150.38
74031 KE21SP Engine
High RPM and torque .21 size big block engine. Easy to tune with recoil starter.
*This product does not come with a break-in ring.When you break in, please use the accessories that came with the Readyset when you purchased it.
Price
SGD251.31
37034 LE MANS 240 GOLD...
Based on the 240S 4WD (15.5T), this 240 gold motor (13.5T) has been enhanced for higher rev. Best matched for the Optima series.
Price
SGD170.56
MZW446 Gyro unit set(for...
Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.
Price
SGD36.33
IGB112OR 2020 Mercedes-AMG...
Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)
Price
SGD302.78
FAW216 Aluminum Damper Set...
Aluminum big bore shocks for Rage 2.0. Threaded large capacity shock bodies.
Price
SGD84.78
11258R 40 Class Sports...
<Required for Operation>
EP Version
●4 channel, 4 servo R/C system for airplanes (standard servo x 4)
●Batteries for transmitter
●100mm Y extension cord x 1 for aileron servo
●200mm extension cord x 2 for aileron servo
●Propeller
●Out Runner BL motor for 40-50 class
●ESC
●Li-Po battery
●Charger for Li-Po battery
GP Version
●4 channel, 5 servo R/C system for airplanes (standard servo x 5)
●Batteries for transmitter
●100mm Y extension cord x 1 for aileron servo
●200mm extension cord x 2 for aileron servo
●Propeller
●2 cycle 40-46 engine for airplanes
●Starting tools (plug heater, starter, starter battery, charger)
●Glow fuel for airplanes
Price
SGD251.31
GPW20 Steering Servo for...
Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.
Price
SGD43.70
MXW006B Mini-Z 4x4...
Rocky terrain for the MINI-Z 4x4. A set of 5 pieces of 480 x 480 x 103mm terrain. Making a square with four pieces and putting the 5th one on the center of the square will make a 960 x 960 x 156mm terrain, and you can enjoy wide variety of terrain by rotating each piece. Even larger terrain can be made using multiple sets.
Price
SGD121.22
MAB074 USA-1 Non Decoration...
USA-1 clear body set with plastic parts. Compatible with 8th scale monster trucks. Includes chrome body parts, decals and masking sheet. Light buckets are compatible with LED optional headlights(97054 / headlights x 8 , Tail lights x 2 and fog lamp x 5). Wheelbase : 360mm / Body dimension : 539 x 206 x 142mm(Without side mirrors & fog lamps)
Price
SGD183.36
MZW124 X-SPEED MINI-Z Motor...
[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book
[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
or MZW124-02 AC adapter (6V- 2A / For Japan)
Price
SGD172.16
MBW027RB Setting Steering...
Steering plate set. 5 kinds of toe angles can be selected for wider setup range.
Price
SGD44.82
36218R Shock Absorber Pits...
Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.
Price
SGD14.26
72012 SPEED HOUSE Multicell...
■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used
Price
SGD151.79
MATH001W Monster Tire with...
Preglued USA-1 tire and wheel set. Includes 2pcs
Price
SGD183.36
FAB503 MAD VAN VE Non...
Can be mounted on the FAZER Mk2 series FZ02L-BT / FZ02L VE-BT chassis.
Body accessory parts with plated finish improve scale realism for body shell, protector parts protect the roof when turn over, polycarbonate rear spoiler, decals and masking sheets used for the ready set. Comes with decoration decals for customized body shell you wish. The LED light unit series (#97054) sold separately can be installed in the light buckets.
Finished body size: Approximately 378x154x135mm (excluding mirrors)
Price
SGD132.43
EZTH001WS...
Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).
Price
SGD48.90