There are 1603 products.
Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.
Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)
Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface
[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book
[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
or MZW124-02 AC adapter (6V- 2A / For Japan)
Steering plate set. 5 kinds of toe angles can be selected for wider setup range.
Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.
■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used
Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80
Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).
Roll damper for R246-2351 MML Motor Mount. Oil damper is sold separately. Compatible dampers: R246-1360, R246-1221, and MZW432.
Aluminum MM2 type motor mount.
Features:
- Precision lightweight design achieves less than 7g in weight while maintaining sufficient rigidity
- Compatible with R246-1362 roll damper as well as MZ217 standard plastic one
Roll damper for R246-1361 and MZ217 MM2 Motor Mount.
Features:
- Blue anodized precision machined aluminum with shiny finished edges
- Recommended using with R246-1360 oil damper
- Can be assembled in L, LL and 3L wheelbases
Lightweight Carbon Rear Shaft for the FANTOM EP 4WD. Improves throttle response by lighter rotating parts. The screw part at tip of differential side is assembled with aluminum parts by factory. Recommended to use with EFW003.
Polycarbonate Wing with gold anodize Wing Holder for FANTOM EP 4WD. Improves rear tire grip by installing it, and stability of straight running and cornering at high speed range are also improved.
■ Number of channels 4 channels
■ Weight 398g
■ Power supply 4 AA alkaline batteries
■ Compatible model Car & boat
■ RF range 2.405-2.475GHz
■ 2.4GHz system FHS (MINI-Z) / FHSS 1Way (KR-331) / FHSS 2Way (KR-431T)
■ Low voltage warning 3.7V or less
■ Steering range 66 ° (45 ° left and right)
■ Throttle range 45 ° (front and rear angle 30 °)
■ Certification CE0678.FCC
Spare air cleaner for the KE21SP/KE25SP engine
Spare parts for the MAD CRUSHER / FO-XX. Included Front Housing parts and screws as 1 set. Not compatible with MA002, MA004F and MA331.
Mercedes AMG GT3 white body for the MINI-Z MR-03 series
Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.
Size: 35.8x51.2mm
Shaft size: 3.175x17mm
Weight: Approximately 180g
Number of turns: 21.5T
Operating voltage: Max 12.8V (2 to 3S LiPo compatible)
kv value: 1950 (rpm / V)
Maximum rotation speed (at 7.4V) : 14430rpm
Maximum current: 30A
Maximum output: 260W
Maximum efficiency: 91%
Spare parts for the TURBO OPTIMA.
Optional parts for the OPTIMA and JAVELIN.
Spare parts for Javelin. Compatible with the Optima to use the Javelin roll cage body.
Spare linkage set for the Inferno MP10T. Compatible with the MP9 / MP10.
CNC machined aluminum hub carrier for the MP10.
Increases durability and rigitity. Includes bushings for bearing protection.
Aluminum heat sink for the motor. Keeps motor temperture low efficiently.
Spare parts for the TURBO OPTIMA. Optional parts for the OPTIMA and JAVELIN.
Spare Parts for DIRT HOG, Turbo Optima, Turbo Scorpion, Javelin
USB-powered quick charger compatible with AA and AAA nickel-metal hydride batteries.
71998 KYOSHO SPEED HOUSE 800HV Excellent compatibility with AAA nickel metal hydride batteries.
Compact AA / AAA NiMH charger powered by USB. Up to 1A charging per slot. USB power supply sold separately.
Optional parts for the TURBO OPTIMA.
Color variation of 50mm wheel.
When use with #OTT244M, it can be used as optional parts for the OPTIMA and JAVELIN.
Spare parts for the TURBO OPTIMA.
Optional parts for the OPTIMA and JAVELIN.
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
LED light unit set equipped with two white LEDs on the front and two red LEDs on the rear.
Compatible with the following models:
- MINI-Z RWD
- MINI-Z FWD
- MINI-Z AWD (with KT-531P transmitter)
- MINI-Z 4x4
- MINI-Z Buggy (with KT-531P transmitter)
- MINI-Z Buggy VE (FHSS)
- MINI-Z Sports series
Parts set for extending wheelbase of AWD Sports to LL. Now compatible with bodies for LL size wheelbase.
※Requires optional spur gear set (for AWD DWS)/No.MDW100-04
Absorbs difference in front and rear tire rotation even through small corners to realize ultra-smooth cornering. Suitable for technical courses where quick handling is required.
Receiver unit for the MINI-Z EVO chassis.
Supports the KT-18 (ASF only), EX-6 and EX-6R (ASF and MHS) transmitters. Also supports KO Propo's EX-2 and EX-RR (MHS only).
