There are 1603 products.
Active filters
OTW109 Carbon Rear Shock...
Light weight 2.5mm carbon fiber shock tower. Compared to the stock aluminum shock tower the carbon fiber shock tower is much lighter and with the same durability
Price
SGD50.00
OTW107 Carbon Front Shock...
Light weight 3mm carbon fiber shock tower. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.
Price
SGD24.00
OTW105 Carbon Front Side...
Light weight 2.0mm carbon fiber side plates. 5g lighter without compromising the durability.
Price
SGD50.00
OTW103 Carbon Rear Plate L...
Light weight 2.5mm carbon fiber plate. Same durability as the stock plates but 5g lighter.
Price
SGD42.00
MBW037B Big Bore Shock...
Precision machined aluminum high capacity oil shock. Provides smooth and reliable damping force, eliminates bounce from jump landings and ensures stability over rough terrain.
Price
SGD72.67
MBW016RB Aluminum Rear...
Aluminum rear shock stay. Provides increased rigidity and better appearance.
Price
SGD44.82
VTEC LIPO 2500 RX-P 7.4V
Weight-90g
Nominal voltage-7.4V
C-rate-RX-only
Dimensions-84x30x17mm
Capacity-2500
Balancing connector-XHR 3-pole
Price
SGD49.92
EP JETSTREAM600 Color Type2...
■Length 690mm (Hull 600mm)
■Width 178mm
■Height 145mm
■Weight 1,150g approx.
■Motor Water-cooled G20
■Speed Controller Waterproof KA060-91W
■R/C System Syncro Syncro KT-231P+
■Propeller D42×P1.4
■Servo Waterproof KS4031-06W
Price
SGD304.59
32357RGB MINI-Z RWD MR-04...
■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Chassis MR-04W-MM
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■Weight 165.8g
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter
Price
SGD279.00
OTM723 1/18 scale STI R205...
World limited 300 pieces
■ Resin model
■ Shield body
Price
SGD159.00
MXW006B Mini-Z 4x4...
Rocky terrain for the MINI-Z 4x4. A set of 5 pieces of 480 x 480 x 103mm terrain. Making a square with four pieces and putting the 5th one on the center of the square will make a 960 x 960 x 156mm terrain, and you can enjoy wide variety of terrain by rotating each piece. Even larger terrain can be made using multiple sets.
Price
SGD121.22
FAB503 MAD VAN VE Non...
Can be mounted on the FAZER Mk2 series FZ02L-BT / FZ02L VE-BT chassis.
Body accessory parts with plated finish improve scale realism for body shell, protector parts protect the roof when turn over, polycarbonate rear spoiler, decals and masking sheets used for the ready set. Comes with decoration decals for customized body shell you wish. The LED light unit series (#97054) sold separately can be installed in the light buckets.
Finished body size: Approximately 378x154x135mm (excluding mirrors)
Price
SGD132.43
EFW004 Front Double...
Optional parts for the FANTOM EP 4WD. By replacing 6x15x5mm bearing for wheel shaft with 2pcs 6x10x3mm bearings, reduces shaft vibration and friction loss. Gold anodized finish Bearing Holder. 2 sets included.
Price
SGD26.49
MDW303 Setting Tie Rod...
Tie-rod set for the MA-03F/MA-030. Provides four steps of toe angle setup for each narrow and wide configuration.
Price
SGD22.41
OTW106 Carbon Front Sus...
Light weight 2.5mm and 2.0mm suspension plates. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.
Price
SGD30.00
MDW024 Rigid Axle(for...
Eliminates differential effect to realize stable drift driving. Can be installed on both front and rear.
Price
SGD40.75
MBW030 Stabilizer Set(for...
3 types of wire diameters can be chosen for both front and rear. Provides a wide range of setting options
Price
SGD24.45
