There are 2434 products.
Active filters
New aluminum hex hub for 17mm wheels. CNC machined aluminum hubs compatible with variety of wheels in the market.
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Sway bar set for the Fazer Mk2 series. Adjust the roll charateristics for more efficient cornering.
Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.
Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors
Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.
Optional front bumper and body mount improves durability. Great for bashing purposes. Requires body triming for 33101.
Specially designed case for organizing tires and wheels of the MINI-Z. Included stickers allow you to identify the tire hardness without opening the case.
New Light weight long shock bushings sets the shock 3mm to the rear. This angle on the rear shocks improves the shock movement performance drastically and increases traction.
New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.
Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
Optional parts for the INFERNO MP10/MP9e Evo.
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination.
Fixing by screws and nylon nut which prevents falling off when driving.
CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
Reduces the weight of chassis by using lightweight titanium rods.
Improves steering response and suspension movement. Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.
Durable hard front hub carrier set. 17.5 degrees
■Length 395mm
■Width 244mm
■Height 120mm
■Wheelbase 260mm
■Front Tread 208mm
■Rear Tread 208mm
■Weight 1,600g (approx.)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 9.24 : 1
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40
Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm
Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.
Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.
■Length: 395mm
■Width: 240mm
■Height: 120mm
■Ground Clearance: 36mm
■Wheelbase: 260mm
■Tread (F/R): 204mm / 204mm
■Tire(F/R): 86f x 40mm / 86f x 40mm
■Gear Ratio: 9.24:1
■Weight: approx. 1,600g
■Motor: 540 class size
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size
■R/C System: 2 channel, 1-servo, ESC
■Length 398mm
■Width 236mm
■Height 145mm
■Wheelbase 263mm
■Tread (F/R) 198mm /195mm
■Tire(F/R) 75×20mm / 85×41mm
■Gear Ratio H setting 6.9:1 L setting 8.3:1 (2 combinations included)
■Weight 985g approx.(w/out R/C system & battery)
■Motor 540-class
■Length 395mm
■Width 245mm
■Height125mm
■Wheelbase 268.5mm
■Tread（Ｆ／Ｒ） 209mm／201mm
■Tire F:φ88×33mm R:φ88×40mm
■Gear Ratio 8.13：1
■Weight 約1,450g
■Motor (sold separately)
＜ Kit Contents＞
●Unassembled kit set
●Body
●Wing
●Tire
●Wheels
●Pinion Gear(24T)
●Ring Gear Grease
●Hex wrench（1.5mm/2.0mm/2.5mm）
●Cross wrench
< Required for operation >
■2ch-3ch R/C car transmitter
■Servos
■ESC
■Motor
■Silicon oil for Shock
■Batteries for receiver
■Charger for battery
■Paint for body
■Tool
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the ASC MR-03W-LM Sauber-Mercedes Gruppe-C-Rennsportwagen C9, Nr.63, LM 1989.
