There are 2614 products.
TZ005 "Flying Doraemon"
●Body size: φ110 (including rotor) x H89 (mm)
●"Doraemon" body size: W48.8 x H58 x D39.3 (without rotor) (mm)
●Body weight: 19g
●Transmitter size: W116 x H89 x D36 (mm)
Package size: W185 x H245 x D118 (mm)
Target age: 10 years old and over
● "Flying Doraemon" body
● Transmitter
● Instruction manual
● USB cable
● Spare parts Rotor (1 set)
● Paper display stand
Price
$60.10
71998 KYOSHO SPEED HOUSE...
Rechargeable AAA NiMH batteries for the MINI-Z sereis. Provide great power and good runtime. 4 pcs included.
Price
$20.00
- New
71351 Speed house Ni-MH...
71351 Speed house Ni-MH Battery 7.2V-1600mAh Micro Plug for Hang-On Racer Specifications
In Stock
Price
$29.00
IFW636 3PC HD LW Aluminum...
Option part for the INFERNO MP10, MP10 TKI2, and MP10T.
Lower weight than the existing aluminum clutch shoes, but stronger acceleration with the refined engagement surface.
Two types of clutch springs, Φ0.9 and Φ0.95 are available for a wider range of clutch settings.
Price
$36.33
MZP241BLY ASC MR03W-MM...
※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.
Price
$112.06
97054-4HR LED Light Unit...
2 light halogen LED and 2 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
$28.00
IFW339B 3PC HD Aluminum...
Compared to conventional 3pc clutch shoes, durability is greatly improved More accurate for clutch on & off by material change. ※Option parts for INFERNO series.
Price
$40.37
MZW38-20B MINI-Z Racing...
Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40
Price
$15.14
34429T1 1/10 RC EP 4WD...
■Length 460mm
■Width 201mm(Body width * Excluding mirrors)
■Height 140mm
■Chassis Height 7mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1,650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L
<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
Price
$352.23
MZP241YBK ASC MR03W-MM...
* You cannot drive with the auto scale alone. In addition, some bodies cannot be mounted due to the chassis.
* The optional part No. MZW411B friction damper set cannot be installed because it interferes with a part of the body.
Price
$105.94
- New
LA429 Front Suspension...
LA429 Offical Kyosho website and online shop for Mini-Z, Optima, Inferno and others, including Kyosho diecast models, miniature cars, Kyosho Egg brand and all latest information.
In Stock
Price
$22.00
SW41376A Sanwa/Airtronics...
Compact receiver
Waterproof
Plug in Bind
Short Coaxial Antenna
●Indicator Function compatible
Indicator function can be checked signal strength connected transmitter.
The indicator function can be used for finding problems as incorrect receiver placing
and finding the best receiver position for transmitter.
By SANWA technical development, indicator function can be checked signal
strength without any effect with response.
●2.4 GHz FHSS5 Spread Spectrum System 4ch
●Compatible with Telemetry
※Cannot connect RPM sensor and Temperature sensor
To measure RPM and Temperature is only
combine with SUPER VORTEX series
●Compatible with SSL (SUPER VORTEX Series, etc...)
●Ultra Response Mode (SUR)
●Extreme Response Mode (SXR)
●Waterproof
●The smallest and most light receiver in the class
Price
$151.79
MZW429R LED Light Clear &...
LED light unit set equipped with two white LEDs on the front and two red LEDs on the rear.
Compatible with the following models:
- MINI-Z RWD
- MINI-Z FWD
- MINI-Z AWD (with KT-531P transmitter)
- MINI-Z 4x4
- MINI-Z Buggy (with KT-531P transmitter)
- MINI-Z Buggy VE (FHSS)
- MINI-Z Sports series
Price
$16.30
- New
- New
IFW642-3 Wing Washer (for...
Optional parts for Inferno MP10/MP10e/MP10T/MP10Te
Price
$20.37
IS205H Rear Lower...
Option parts for INFERNO MP10T. Harder suspension arm than standard one to improve hardness. Setting parts according to road surface.
Engraved for identification.
Price
$28.52
IF624-65 HD Sus. Shaft...
Spare parts for MP10
Increased durability and reliability is achieved with larger φ4.5mm diameter inner hinge pins compared to the φ4.0mm hinge pins on the MP9 TKI4.
Price
$14.26
IF605 Hard Rear Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
$112.06
- New
07038B6 1/64 scale Tyrrell...
*Book not included. This is a single miniature car.
- Mini car size: total length 6.3cm
- Mini car materials: zinc alloy, ABS resin, PVC (non-phthalate), polystyrene
- Gimmick: No opening/closing mechanism
- Others: Display pedestal included
In Stock
Price
$35.00
- New
- New
- New
- New
- New
SWPGSCL2 Sanwa Servo PGS CL...
0●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●HIGH TORQUE TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness
Price
$100.85
- New
