Weight-90g

Nominal voltage-7.4V

C-rate-RX-only

Dimensions-84x30x17mm

Capacity-2500

Balancing connector-XHR 3-pole

Features

Technical data

Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh

Technical data

■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm／Φ86×23mm
■Gear Ratio 13.80：1～19.30：1
■Weight 750g  (approx.)
■Motor Le Mans DM20

<Kit Content>
●Chassis kit
●Pinion gear (10T, 12T, 14T)

<Required to run>
●2ch R/C system
●Batteries for transmitter
●servo×1 (Recommended: NoGPW20)
●ESC×1 (Recommended: No.GPW17)
●Battery for chassis（7.2V-1600mAh Ni-MH)
●Charger for battery 
●Charger Convert Connector
●Grease（Recommended:No.96508)
●Paint
●Tool

TECHNICAL DATA

Cell chemistry  -  LiPo HV
C-rate  -  120C/60C
Length  -  139.0mm
Width  -  47.0mm
Height  -  17.5mm
Weight  -  215g (+/-4%)
Connectors  -  5mm
Homologated  -  ROAR, EFRA, BRCA

■サイズ：420×240×330mm

■Length　163mm
■Width　105mm
■Height　46mm
■Wheelbase　115mm
■Tread（Ｆ/Ｒ）　89mm/89mm
■Tires（Ｆ/Ｒ） φ37×13.5mm／φ37×18.5mm
■Weight　200g approx.
■Motor　SPEED HOUSE XSPEED 85 (8500KV)

<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts

<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)

■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 403mm
■Width 240mm
■Height 130mm
■Wheelbase 260mm
■Front Tread 204mm
■Rear Tread 204mm
■Weight 1,700g (approx.)
■Tires (F & R) φ86×40mm
■Motor 540 Class size（sold separately）
■Gear Ratio 9.24：1

・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR

■Length 490mm
■Width (Body width * excluding mirror) 208mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tool

TECHNICAL DATA

Nominal voltage - 7.6V

C-rate - 45C

Style - Hardcase

Connector - US-Style

Balancing - connectorXH

Application - On/Offroad

Length - 137mm

Width - 47mm

Height - 25mm

Weight - 352g

Capacity - 9000mAh

■Length 378mm
■Width 249mm
■Height 150mm
■Wheelbase 270mm
■Tread (F/R) 221mm／201mm
■Tire F:φ84×33mm R:φ86.5×42mm
■Gear Ratio 8.23：1
■Weight 約1,480g
■Motor (sold separately)

＜ Kit Contents ＞
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench（1.5mm/2.0mm）
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear（24T）

【REQUIREMENT TO RUN】
■2ch～3ch transmitter & receiver for R/C cars 
■Servo 
■ESC 
■Motor 
■Silicone oil for Shock 
■Batteries for chassis(2S Lipo Recommendation） 
■Charger 
■Paint for coloring body (*spray paint for polycarbonate)
■Tool

■Length 455mm
■Width（Body width） 200mm（210mm）
■Height　120mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ64×24.2mm／R：φ64×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V 

chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21V (recoil starter installed/rear exhaust)

<kIT cONTENT>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21V engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench

<Require for operation>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)

FEATURES

TECHNICAL DATA

Power for the Sanwa MT-44! This Transmitter battery offers highest Performance. The VTEC LiPo TX-Pack is a true transmitter battery for Transmitters. Its dimensions perfectly match the size of the battery tray.

LiPo power at a budget price from ANTIX by LRP.

These RC car LiPos are ideal for hobby and amateur drivers looking for power and durability at a budget price.

The special "stickpack" shape is based on the NiMh packs for which many chassis were designed.
Also for the new release of vintage models you get perfectly fitting batteries of the latest technology with 134mm length and additionally slightly offset cable exit, so the battery posts of your chassis do not get in the way.
Equipped with a robust hard case, these 2S LiPo batteries are suitable for tough On- and Offroad use.

Ideal weight for 1/10 TC racing combined with Low Center of Gravity design.
HV-LiPo Perfect car balance and power for tight tracks.

TECHNICAL DATA

■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F：250mm／R：250mm
■Tires (F/R) F：φ110×70mm／R：φ110×70mm
■Gear Ratio 11.803:1
■Weight  2180g (approx.)
■R/C system   Syncro KT-231P+
■Motor TORX10E (3652 kv4000)

TECHNICAL DATA

Meet the small brother of the successful Pulsar Pro charger. The Pulsar Sport has everything that you need for your battery management. The integrated power supply allows you to directly connect it either to
a AC wall socket or to DC sources like car batteries. You don’t need a separate power supply anymore.

Of course, the currently highly sought after HV LiPo battery packs with up to 8.7V (2S) charging are no problem for the Pulsar Sport. It supports LiPo HV charging, making it fully prepared for any future tasks.

Like with all current LRP chargers, the Pulsar Sport also offers a USB charge port (5V/1.0A) that is suitable for smartphones and MP3 players.

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

Go safe on runtime with our maximum capacity pack of the Shorty Lineup! 
Perfect for power hungry tracks (and drivers) and overtime races.

The battery for any situation where you need the maximum power over the whole run. Lowest IR in our StockSpec Line! 

Perfect for fast tracks if you can handle the weight - this pack will be your choice. 

HV LCG Modified GRAPHENE-3 Ideal weight for 1/10 touring cars combined with low center of gravity design and increased capacity. Perfect car balance and power for fast modified tracks.