There are 1655 products.
IF604 Hard Front Shock...
Spare parts for MP10
Based on the suspension geometry of the MP9 TKI4 shock stay, the number of shock and upper arm mounting holes has been optimized. In addition, the reinforced rear shock stay delivers increased strength and prevents dirt catching.
Price
SGD101.87
- New
- New
IFS006-1116 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFW634-46S Light Weight...
New light weight 46T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
SGD64.59
MBW018RB Aluminum Front Hub...
Aluminum front hub carrier. Provides increased rigidity and better appearance.
Price
SGD61.12
37051B Le Mans 240S ESC...
Internal resistance: 0.0011Ω
Continuous maximum current: 60A
Instantaneous maximum current: 80A
Maximum KV value (2S): 13.5T 3200KV
Driving mode: Forward / brake / forward / brake / reverse
Input voltage: 7.2V-11.1V
Compatible motor type: Sensor & Sensorless
BEC output: 6V / 2A
size (mm): 37.5 x 30.8 x 18.7
Weight (g): Approximately 80
Price
SGD121.22
IF459-2.9 Front Sway Bar...
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Price
SGD9.00
MZW439R LED Light...
Light unit compatible with the I.C.S connector of the RC units of ASF and MHS/ASF systems. Tail lights are brighter while braking.
Price
SGD18.34
MDW017 Front Oneway...
Absorbs difference in front and rear tire rotation even through small corners to realize ultra-smooth cornering. Suitable for technical courses where quick handling is required.
Price
SGD71.31
MDW004 Suspension Spring...
Spring set adjusts hardness of suspension. Includes 3 hardness types. *For MA-020S rear.
Price
SGD18.34
66616 FIRST MINI-Z SPEED RACER
●Scale: Approximately 1/28 scale
●Product size：L181 x H46 x D71（mm）
●Product weight：109g (approx.)
●Package size：W215 × H225 × D115（mm）
●Package weight：433g (approx.)
●Maximum speed: Training mode: 7km/h Racing mode: 10km/h
●Operation distance: approx. 30m
●Frequency: 2.4GHz (12 vehicles can run simultaneously)
●Continuous running time: Approximately 60 minutes (when using new alkaline batteries)
●Target age: 6 years old or older
<Kit Content>
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
<Required to run>
●AAA-size alkaline batteries x 2 for chassis (sold separately)
●AAA-size alkaline batteries x 2 for transmitter (sold separately)
Price
SGD69.00
IFW609C Aluminum Steering...
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for Futaba servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
Price
SGD40.74
IFS006-10516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFS005-8516 Big Shock...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
IFW634-45S Light Weight...
New light weight 45T spur gear for use with smaller diff for the center(Same as front and rear diff). By using the smaller diff, accelaration will be quicker and smoother. Smoother deaccelaration can also be achieved. This spur gear is design to fit the smaller diff case replacing the stock diff housing which is larger. Requires the use of IF403B Diff case set. Compatible with MP10/9 series.
Price
SGD64.59
R246-8522 2P Super Plug A...
A set of 5 male 24K gold-plated 2P plugs that have become a standard for electric power.
■ We adopt 24K gold plating plating.
■ A Type (male), 5 pieces.
■ Comes with shrink tube in each color of black and red.
Price
SGD8.15
IFW619 Drive Bevel Gear...
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
Price
SGD38.71