There are 1601 products.
Active filters
Cross wrench good for changing plugs and flywheel on nitro cars(5.5mm/7mm/8mm/10mm).
Also have slots to hold spare glow plugs.
1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing
■Length 200.5mm
■Width 87mm
■Height 104.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 238/g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1 / 46.20：1 / 39.60：1 / 34.65：1 / 30.80：1 / 27.72：1
■Front Tire Φ42.0mm
■Rear Tire Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
<Kit Content>
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
<Required to run>
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
■ Combo set
TT02 EFRA2690 (T-1080SC L52) & MT02
・Plug P4 turbo plug ・Dust cap set 3mm (1 piece) 16mm (2 pieces) ・Exhaust seal ring
■Length 370mm
■Width 250mm
■Height 130mm
■Wheelbase 260-263mm
■Tread F:208mm / R:214
■Weight approx 1500g(with 7.2V4000 LiPo）
■Tires F: φ75×20mm / R: φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.64：1
<Kit Content>
●Kit chassis
●Tire
●Wheel
●Clear body
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil
●Ball Diff Grease
＜Required for Operation＞
●2 channel R/C system
●Servo
servo size：L42xW21xH38mm
●540Motor
●ESC
ESC size：L45xW38xH27mm
●Battery for chassis
Battery size：L140xW47.5xH25mm
●Batteries for transmitter
●Charger for battery
●Paint for body
MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.
■Length 202.0mm
■Width 95.0mm(Both ends of the tire)
■Height 96.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:77.0mm
■Weight 247.6g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ40.5mm
■Rear Tire Diameter Φ40.5mm
■Front Tire Width 18.0mm
■Rear Tire Width 18.0mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Require to run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for Futaba servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.
■Length 156.0mm
■Width 69.0mm
■Height 47.5mm
■Wheelbase 94.0mm （L）
■Tread F:56.5mm R:56.5mm
■Chassis RWD(MR-03)
■Motor Mount RM
■Front Wheel Offset Narrow +-0.0mm(for RWD)
■Rear Wheel Offset Narrow +-0.0mm(for RWD)
■R/C System Syncro KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted plastic body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Front suspension adjustment spacers
●Pinion gears 6T, 7T, 8T, 9T
●Wheel wrench
●Pinion gear tool
●Spare nuts
●Pairing stick
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Aluminum knuckles. Provides increased rigidity and better appearance.
Carbon AMB Holder for the MP9/MP10. made from precision high quality carbon material.
Spare part for the Mad Van VE. It can be used on the standard Mad Van(34412T1) as an option. Durable sintered metal materila.
Speed controller for 60A waterproof sensorless brushless motor. Cooling fan helps to protect the ESC from overheat and supply stable power. Input voltage : 2-3S LiPo (7.4-11.1V) or 6-9S NiMH battery (7.2-10.8V). Size : 48.5x38x32mm (including cooling fan) / Continuous maximum current : 60A / Peak current : 390A / Weight : 90g / Bec output : 6V/3A
Sensorless brushless motor 4000kv (shaft diameter : 3.175mm) for 2S LiPo. The main body has a dustproof structure to avoid maintenance. Suitable for 1/10 On and Off-road cars. Weight : 205g
Carbon Front Suspension Arm for the FANTOM EP 4WD. Allows weight reduction and increased rigidity around front parts by replacing FRP upper and lower suspension arms, improves initial steering reaction.
Metal universal joint. Durable metal components efficiently convey power under high load condition.
Reciver unit for the MINI-Z EVO chassis.
Supports the KT-531 and KT432PT transmitters.
Pit mat with cool MINI-Z logos.
Great for maintanance of your MINI-Z while keeping the pit table clean.
Soft and grippy PVC material avoids small parts to fall off the table.
Size: 24 in. x 17 in. (approx 600 x 430mm).
A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.
- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm
