Option parts for the MP10T (for Front Shock)

Option parts for the MP10T (for Front Shock)

Spare parts for the IFW615.

Spare parts for the IFW614.

Optional parts for the INFERNO MP10.
By covering the joint part of the universal swing shaft with an aluminum cap, it has the effect of preventing splashing of grease and improved durability, as well as protecting a damage from dust.
It also protects the pins from falling off in case of damaging the joint parts.

Option parts for the Rage / Fazer Mk2 chassis. CNC machined aluminum 75T spur gear. Best for high power motors

Optional parts for the Fazer MK2 Rage 2.0. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

Optional parts for the Fazer MK2 Touring cars. Universal Swing shafts to replace the Swing shafts. Protects faling off the shafts when crash and improves drive efficiency.

Optional front bumper and body mount improves durability. Great for bashing purposes. Requires body triming for 33101.

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Spare parts for the Nitro Tracker

Specially designed case for organizing tires and wheels of the MINI-Z. Included stickers allow you to identify the tire hardness without opening the case.

Option parts for the MP10T (for Rear Shock)

Option parts for the MP10T (for Front Shock)

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

Spare parts for the MP10T

New Light weight long shock bushings sets the shock 3mm to the rear. This angle on the rear shocks improves the shock movement performance drastically and increases traction.

New 0 degrees hub carrier brass bushing inserts for the Inferno MP9 / 10. Increased durability and more weight to increase traction.

Durable steel rear center shaft cup. Precision CNC machined for heavy duty use.

Optional Parts for the MP10/MP9 series. High precision Alumimum Steering Horn for KO/Sanwa servos. It is 2mm shorter than existing aluminum steering servo horns, and the initial reaction of corner tends to be mild and easy to drive.

Optional parts for the INFERNO MP10/MP9e Evo. 
New setting weights by 10g and 20g which can be installed the main chassis. 
Can be adjusted the weights in 10g/20g/30g/40g by weights combination. 
Fixing by screws and nylon nut which prevents falling off when driving.

Optional parts for the INFERNO MP10/MP9e Evo. 
New setting weights by 10g and 20g which can be installed the main chassis.
Can be adjusted the weights in 10g/20g/30g/40g by weights combination. 
Fixing by screws and nylon nut which prevents falling off when driving.

Optional parts for the INFERNO MP10/MP9e Evo. 
New setting weights by 10g and 20g which can be installed the main chassis. 
Can be adjusted the weights in 10g/20g/30g/40g by weights combination. 
Fixing by screws and nylon nut which prevents falling off when driving.

CNC machined aluminum center shaft for FZ02 chassis. Durable precision made center shaft for high power motors / high gear ratio setups.

For Mp10, MP9e

Option parts for the INFERNO MP9 / MP10. 
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.

Reduces the weight of chassis by using lightweight titanium rods. 
Improves steering response and suspension movement.  Includes Upper Rods for Front & Rear, Steering Tie Rods and Steering Servo Rod, 7pcs in total.

Durable hard front hub carrier set. 17.5 degrees

Spare parts for FAZER RAGE 2.0

■Length      395mm
■Width       244mm
■Height      120mm
■Wheelbase   260mm
■Front Tread  208mm
■Rear Tread   208mm
■Weight      1,600g (approx.)
■Tires (F/R)  φ82×36mm
■Motor       540 class size (sold separately)
■Gear ratio    9.24 : 1

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW37-20 / MZW37-30 / MZW37-40

Spring set for adjusting hardness of rear suspension. Includes 3 different hardness types.■Length：23mm

Realizes more consistent braking due to special material of brake pad and unique glued method between plate and pad.

Optional parts for the INFERNO MP10.
Hard type suspension arm increases response and rigidity. Allows easy control when landing.

■Length: 395mm 
■Width: 240mm 
■Height: 120mm 
■Ground Clearance: 36mm 
■Wheelbase: 260mm 
■Tread (F/R): 204mm / 204mm 
■Tire(F/R): 86f x 40mm / 86f x 40mm 
■Gear Ratio: 9.24:1 
■Weight: approx. 1,600g 
■Motor: 540 class size 
■Battery: Ni-MH / Li-PO ?Li-PO: Standard Size / short size 
■R/C System: 2 channel, 1-servo, ESC

■Length 398mm 
■Width 236mm 
■Height 145mm 
■Wheelbase 263mm 
■Tread (F/R) 198mm /195mm 
■Tire(F/R) 75×20mm / 85×41mm 
■Gear Ratio H setting 6.9:1　L setting 8.3:1 (2 combinations included) 
■Weight 985g approx.(w/out R/C system & battery) 
■Motor 540-class

1. High-tech regulator application, output voltage is 1.5V
2. Switching transfer with low heat dissipation
3. Large LCD shows battery status
4. Including Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead)
5. Convenient, economical, pistol-sized design
6. Fits any glow plugs within new 4-cycle plugs

■Length 395mm
■Width 245mm
■Height125mm
■Wheelbase 268.5mm
■Tread（Ｆ／Ｒ） 209mm／201mm
■Tire F:φ88×33mm R:φ88×40mm
■Gear Ratio 8.13：1
■Weight 約1,450g
■Motor (sold separately)

＜ Kit Contents＞
●Unassembled kit set
●Body
●Wing
●Tire
●Wheels
●Pinion Gear(24T)
●Ring Gear Grease
●Hex wrench（1.5mm/2.0mm/2.5mm）
●Cross wrench

< Required for operation >
■2ch-3ch R/C car transmitter
■Servos
■ESC
■Motor
■Silicon oil for Shock
■Batteries for receiver
■Charger for battery
■Paint for body
■Tool

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.
※The separately sold LED light unit set (No.MZW429R) cannot be installed on the ASC MR-03W-LM Sauber-Mercedes Gruppe-C-Rennsportwagen C9, Nr.63, LM 1989.

For filling out the Fuel Pump. Prevent fuel from spilling. ※2. 4×6×1000mm

■Length 572mm
■Width 274mm
■Height 214mm
■Wheelbase 340mm
■Tread F/R 224mm
■Tires（F & R） φ110 x 47mm
■Gear Ratio 10.41:1
■Weight 3,410g (approx.)
■Motor TORX10L Brushless Motor kv2850

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner

<Required for Operation>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery

■Length 202.0mm
■Width 95.0mm(Both ends of the tire)
■Height 96.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:77.0mm
■Weight 247.6g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ40.5mm
■Rear Tire Diameter Φ40.5mm
■Front Tire Width 18.0mm
■Rear Tire Width 18.0mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers

Require to run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）