There are 1508 products.
Universal swing shaft for MINI-Z Buggy/Comic Racer. Delivers improved drive efficiency and prevents shaft dropping out. Interchangeable on front and rear.
Aluminum rear shock stay. Provides increased rigidity and better appearance.
Cross wrench good for changing plugs and flywheel on nitro cars(5.5mm/7mm/8mm/10mm).
Also have slots to hold spare glow plugs.
■Length 368mm
■Width 200mm
■Height 105mm
■Wheelbase 258mm
■Tread (F/R) 174mm/170mm
■Tires (F/R) (sold separately)
■Gear Ratio 7.18／5.09：1
■Weight 1,700g (approx.)
■Engine 12-15 Class (sold separately)
<kit content>
●Unassembled chassis kit
●Grease
●1.5mm・2.0mm・2..5mm・5.0mm L-shape hex wrench
●Cross wrench (small)
＜Required for Operation＞
●2ch-3ch R/C car transmitter
●Servos x 2
●Batteries for transmitter
●Batteries for receiver (flat pack)
●12-15 class engine with rear exiting exhaust
●Starter box,
●Plug heater
●Glow fuel
●fuel bottle
●200mm width touring car body
●Paint for car body
●Rubber tire
●Tire inner
●Silicon oil for diff
●Silicon oil for Shock
●Tools
■Length 145.0mm
■Width 68.0mm
■Height 53.0mm
■Wheelbase 90.0mm（M）
■Tread F : 56.5mm R : 56.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow ±0.0ｍｍ
■Rear Wheel Offset Narrow ±0.0ｍｍ
■Weight 185g
■R/C System Syncro KT-531P
<Ready set contents>
● R / C unit built-in complete chassis
● Painted and marked complete body
● Syncro KT-531P transmitter
● Mini pylon
● Pinion gear (15T, 17T, 19T, 21T)
● Spur gear (27T, 29T, 31T)
● Spare nut
● Wheel wrench
● Pinion removal tool
＜ Required for Operation ＞
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 for transmitter
Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.
<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2
Machined aluminum steering blocks. Available in 0.5°, 1.5°, and 2.5° camber angles, based on the standard 0°. Similar to the MZW702, they feature a realistic design that allows adjustment of the upper arm mounting position and kingpin tilt, just like full-scale vehicles. When combined with the MZW702, fine-tuned adjustments can be made from 0°to 3°in 0.5°increments.
For the MR-04 EVO2 chassis. Friction shock for the MR-04MM, featuring carbon plates. It contributes to improved vehicle stability at high speeds. The set includes three springs of varying stiffness levels. The friction shock is compatible with the standard pitching shock and the MZW432B rear oil shock. It can also be used with the MZW708 aluminum oil shock mount.
■Length 378mm
■Width 249mm
■Height 150mm
■Wheelbase 270mm
■Tread (F/R) 221mm／201mm
■Tire F:φ84×33mm R:φ86.5×42mm
■Gear Ratio 8.23：1
■Weight 約1,480g
■Motor (sold separately)
＜ Kit Contents ＞
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench（1.5mm/2.0mm）
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear（24T）
【REQUIREMENT TO RUN】
■2ch～3ch transmitter & receiver for R/C cars
■Servo
■ESC
■Motor
■Silicone oil for Shock
■Batteries for chassis(2S Lipo Recommendation）
■Charger
■Paint for coloring body (*spray paint for polycarbonate)
■Tool
MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.
The blade is maked 7mm,9mm,11mm,13mm and 15mm.When using please use the marking as an indicator.
Option Parts for INFERNO MP9
Shock cap set to change the existing MP9 damper to aeration type. For 1 car.
Features of the aeration type are excellent in absorbing gap of fine road surface, and improve the grip feeling and advancing force.
■Length 202.0mm
■Width 95.0mm(Both ends of the tire)
■Height 96.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:77.0mm
■Weight 247.6g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ40.5mm
■Rear Tire Diameter Φ40.5mm
■Front Tire Width 18.0mm
■Rear Tire Width 18.0mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
Kit Content
●Complete chassis with built-in electronics.
●Factory-painted body complete with many fine details
●KT-531P 2.4GHz transmitter
●Pinion gear set（10T、12T、14T、16T、18T、20T）
●3 types of pinion gear spacers
Require to run
●4 x AAA batteries for the transmitter
●4 x AAA batteries for chassis （Alkaline or NiMH）
Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.
～ for the full rally experience ～
Rally conversion set for the Fazer MK2 touring cars with short wheelbase. Longer suspension stroke allows off-road driving. Includes longer shocks, shock towers and related parts. Does not come with tire and wheels.
Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface.
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.
2-Speed Transmission gear unit for the Inferno GT2 series.
Based on the 240S 4WD (15.5T), this 240 gold motor (13.5T) has been enhanced for higher rev. Best matched for the Optima series.
