There are 1425 products.
MA356 Rear Hub Carrier(MAD...
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.
IGW008B-05 2-Speed...
2-Speed Transmission gear unit for the Inferno GT2 series.
MZP453GM ASC MA-020S Honda...
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.
66608 First Mini-Z Nissan...
●Scale approx. 1/28
●Product size: L164 x D73 x H45 (mm) ● Body
weight: approx . Mode: 7km/h / Racing mode: 10km/h ●Operable distance: approx. 30m ●Frequency: 2.4GHz (12 units can run simultaneously) ●Continuous running time: approx. 60 minutes (when using new alkaline batteries) ●Target age: 6 years old that's all
KIT CONTENTS
●Main unit
●2.4GHz controller with stopwatch
●Mini pylons (6 pieces)
●Trim adjuster
●Battery holder
WHAT YOU NEED BEFORE RUNNING
● 2 AA alkaline batteries for the First Minute main unit,
● 2 AA alkaline batteries for the controller
34701T2 MAD WAGON VE Color...
■Length 472mm
■Width 350mm
■Height 198mm
■Wheelbase 295mm
■Tread F/R 278mm
■Tires(F & R) φ128 x 70mm
■Gear Ratio 15.22:1
■Weight 3,610g (approx.)
■Motor TORX10L Brushless Motor kv2850
<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner
<Required to operate>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery
OTW141 HD Upper Deck...
CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.
IGW001GM Al Front Hub...
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
MBW017RB Aluminum Knuckle...
Aluminum knuckles. Provides increased rigidity and better appearance.
40110T3 1/5 RC SURFER4...
■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.
< Kit Contents >
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder
< Required for Operation >
●AA batteries x 4 for transmitter
FAW229 HD Ring Gear 41T
34491T1 MAD VAN VE 1:10...
■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F:250mm/R:250mm
■Tires (F/R) F:φ110×70mm/R:φ110×70mm
■Gear Ratio 11.803:1
■Weight 2180g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E (3652 kv4000)
IFW502-01 Cooling Fan...
Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.
EFW003 SP Rear Wheel...
Clamp Type Rear Wheel Hub for the FANTOM EP 4WD. Lightweight gold anodized hub & collar set. Prevents damage to shaft due to core deviation and screws.
MA354 Diff.Housing(MAD...
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.
40211T2 WAVE CHOPPER 2.0...
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
40211T1 WAVE CHOPPER 2.0...
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
IFW618 Ring Gear (42T/MP10)
Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).
32522MR MINI-Z 4×4 Series...
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1/30.80:1/46.20:1
27.72:1/39.60:1/34.65:1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
32522GM MINI-Z 4×4 Series...
■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44:1/30.80:1/46.20:1
27.72:1/39.60:1/34.65:1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins
MD301SP SP Main Chassis...
MINI-Z FWD main chassis equipped with gold plated battery termials, which have lower electric resistance.
MA303B Bumper/Body Mount...
Spare parts for Mad Force / FO-XX / Mad Crusher.
IFW603 3PC Clutch Set...
Option parts for the INFERNO MP9 / MP10.
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.
OTW106 Carbon Front Sus...
Light weight 2.5mm and 2.0mm suspension plates. Compared to the stock aluminum plates the carbon fiber plates are 2g lighter and with the same durability.
FAW225 TC Aluminum Shock Set
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
MZW423 Front Spring...
Spring set is softer and 0.5mm shorter than MZW401. Delivers superior performance when combined with MZW415 aluminum upper arm and MZW416 inner tube shock. Includes 5 types.
MDW009B Hard Universal...
Maintains smooth drive transmission and bend resistance, even in hard crashes.
MDW005-15 Camber Knuckle...
Knuckle set for changing rear camber. 3 angle types.
■MDW005-15 / MDW005-30 / MDW005-45
IS053C 6.8mm Ball End...
Spare parts for MP10
The optimized Ackerman in the MP10 delivers an increase in lock-to-lock steering travel. The design of the new reinforced tie rod ends doesn’t interfere with the inside of the tire and wheel when steering is at maximum angle.
97053B 3PC ADC Clutch Shoe Set
Separate type clutch shoe is included with the Readyset.
82040 MINI-Z EVO RX UNIT KT18
Receiver unit for the MINI-Z EVO chassis.
Supports the KT-18 (ASF only), EX-6 and EX-6R (ASF and MHS) transmitters. Also supports KO Propo's EX-2 and EX-RR (MHS only).