Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Spare parts for MAD WAGON

Option Parts for INFERNO GT2 Type-R.

Spare Parts for SCORPION 2014

High RPM and torque .21 size big block engine. Easy to tune with recoil starter.

*This product does not come with a break-in ring.When you break in, please use the accessories that came with the Readyset when you purchased it.

Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.

Correspondence table

Complete body set for the Inferno GT2. Licensed 2020 Mercedes AMG GT3 body. Wheelbase : 360mm / Body Dimensions : 661 x 310 x 164mm(With rear wing)

Aluminum big bore shocks for Rage 2.0. Threaded large capacity shock bodies.

■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) 250mm
■Tires (F/R) φ110×70mm
■Gear Ratio 11.803:1
■Weight  2180g (approx.)
■R/C system   Syncro KT-231P+
■Motor TORX 10E

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (Can be changd by replacing rear hub collars）
■Tread(F/R) 254mm
■Tires(F/R) (sold separately)
■Gear Ratio 10.14 : 1
■Weight  3,650g   (approx.)

<Kit Content>
●Unassembled kit set
●Clear body
●Window mask sheet
●Pinion gear
●Decals
●1.5, 2.0, 2.5,3.0mm Hexagonal wrench
●Cross wrench 
●Ring gear grease

<Required to run>
■2ch～3ch transmitter & receiver for R/C cars 
■Servo 
■ESC 
■Motor 
■Tire & Inner sponge (for 1/8 Buggy) 
■Wheel 
■Silicone oil for Diff 
■Silicone oil for Shock 
■Paint for coloring body (*spray paint for polycarbonate) 
■Battries for chassis(2S Lipo x2 Recommendation） 
■Charger 
■Tool

■Length 380mm
■Width 249mm
■Height 140mm
■Wheelbase 270mm
■Tread F:221mmR:201mm
■Tire F:φ84×28mm R:φ86.5×42mm
■Gear Ratio 8.23：1
■Weight 1,450g (approx.)
■Motor (sold separately)

＜ Kit Contents ＞
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench（1.5mm/2.0mm）
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear

【REQUIREMENT TO RUN】
■2ch～3ch transmitter & receiver for R/C cars 
■Servo 
■ESC 
■Motor 
■Silicone oil for Shock 
■Batteries for chassis(2S Lipo Recommendation） 
■Charger 
■Paint for coloring body (*spray paint for polycarbonate)
■Tool

■Length 462mm
■Width 200mm(Body width * Excluding mirrors)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 260mm
■Tread (F/R)  167mm
■Tires (F/R)  φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 472mm
■Width 350mm
■Height 198mm
■Wheelbase 295mm
■Tread F/R 278mm
■Tires（F & R） φ128 x 70mm
■Gear Ratio 15.22：1
■Weight 3,610g (approx.)
■Motor TORX10L Brushless Motor kv2850

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner

<Required for Operation>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery

■Length (Including body) 456mm
■Width205mm (Excluding mirrors)
■Chassis Height 8mm (approx.)
■Height (Including body) 138mm
■Wheelbase 260mm
■Tread（F／R） 174mm
■Tires（F／R） φ66×25mm
■Gear Ratio 6.54：1
■Weight 約1650g
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 498mm
■Width (Body width * excluding mirror) 210mm
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system  Syncro KT-231P+
■Motor  G14L

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 340mm
■Width 172mm
■Height 83mm
■Chassis type Chain drive4WD
■Wheelbase 199-200mm（Adjustable）
■Tread F:135mm/R:133mm
■TireF:φ48×23mm/R:φ53×35mm
■Gear ratio 3.38：1
■Weight approx.890g(with GAB4201）
■Motor 540class（both sold separately）
■Used propo 2ch 1servo 1ESC
■※Maximum Speed 約55km/h (with Le Mans480T BL）
■※Driving Time approx.23minutes(with Le Mans480T BL）

※Depends on driving conditions

<Kit Contents>
●Chassis kit
●Adhesive shaped tire
●Unpainted body
●Decal
●Wheel wrench（12/4.0）
●5.5/4.5wrench
●FRP shock wrench

<Required for Operation>
●Radio transmitter with 2 channel, 1-servo(Receiving size:L37xW30xH16.5mm)
●1 Electronic speed controller (ESC size：38x31x23mm)
●540 Motor
●Battery for chassis(Battery size：138x48x24.5mm)
●Batteries for transmitter
●Charger for Battery
●Paint for body

Option parts for Hang-on Racer

Option parts for Hang-on Racer

Mini steering servo for the Hang On Racer. Bolt on ready. 150mm wire with JR type no flange connector housing. Screw and aluminum collar included.

Option parts for Hang-on Racer

■Length  563mm
■Width  414mm
■Wheelbase 384-389mm
■Tread（F/R） 353mm(approx)
■Tires（F/R） For stadium track(Sold separately)
■Gear Ratio 14.12:1
■Weight  4,200g (approx)
■Transmitter 2ch or more 1 servo /1 ESC(Sold separately)

＜Kit Contents＞
●Unassembled chassis kit
●Clear body
●Decals
● Hexagonal wrench (1.5mm、2.0mm、2.5mm、3.0mm)
●Cross wrench
●17mm wheel wrench

＜Required for Operation＞
●2ch～3ch transmitter & receiver for R/C cars
●Servo (high torque servo recommended)
●Motor(for 1/8)
●ESC
●Battries for chassis(7.4vLipox2 Recommendation）
●Charger
●Stadium truck tire
●Wheel
●Inner sponge
●Color for body painting

Rocky terrain for the MINI-Z 4x4. A set of 5 pieces of 480 x 480 x 103mm terrain. Making a square with four pieces and putting the 5th one on the center of the square will make a 960 x 960 x 156mm terrain, and you can enjoy wide variety of terrain by rotating each piece. Even larger terrain can be made using multiple sets.

■Length 500mm
■Width 210mm(Body width * excluding mirror)
■Height 136mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 461mm
■Width (Body width * excluding mirror) 210mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 260mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54：1
■Weight 1610g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

■Length 452mm
■Width 192mm(* Excluding mirrors)
■Height 135mm
■Chassis Height 8mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 174mm
■Tires (F/R) φ66×25mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system &; Syncro KT-231P+
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

Spare parts for Optima Mid

Spare parts for OPTIMA MID

USA-1 clear body set with plastic parts. Compatible with 8th scale monster trucks. Includes chrome body parts, decals and masking sheet. Light buckets are compatible with LED optional headlights(97054 / headlights x 8 , Tail lights x 2 and fog lamp x 5). Wheelbase : 360mm / Body dimension : 539 x 206 x 142mm(Without side mirrors & fog lamps)

■Length 375mm
■Width 244mm
■Height 142mm
■Wheelbase 255mm
■Tread (F/R) 208mm
■Weight approx1,600g(with 7.2V4000 LiPo)
■Tires (F/R) φ82×36mm
■Motor 540 class size (sold separately)
■Gear ratio 8.28：1

<Kit Contents>
●Kit chassis
●Tire
●Wheel (white)
●Clear body
●Wing (white)
●Mask sheet
●Decals
●hexagon wrench
●Cross wrench
●Shock wrench
●Grease
●Shock oil

<Required for Operation>
●2 channel R/C system
●Servo
●540Motor
●ESC
●210mm Sensor cable
●Battery for chassis（7.4V Ni-MH battery or 7.4V Li-Po battery）
●Charger for battery for chassis
●Batteries for transmitter

■Length 455mm
■Width（Body width） 200mm（210mm）
■Height　120mm
■Wheelbase 260mm
■Tread (F/R)：174mm
■Tires (F/R)：φ63.2×24.2mm
■Gear Ratio 6.54：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
● Setting change parts

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

[Contents]
・ Motor checker body
・ Power cable with super plug ・
O-ring for fixing motor x2 (1 is spare)
・ Rotation adapter x2 (1 is spare)
・ Wiring cable with alligator clip for brush motor
・ Instruction instructions book

[Items that need to be purchased separately] -Battery
motor or brushless motor for minutes (measurement target)
-Battery with super plug from 5.5V to 7.4V (maximum voltage up to 8.4V)
  or MZW124-02 AC adapter (6V- 2A / For Japan)

Steering plate set. 5 kinds of toe angles can be selected for wider setup range.

Recommended Stand for working on the damper. The magnet plate on the front will help preventing to lost screws.

■ Input voltage USB Type-C 5-12V (Power supply with output 3A or more compatible with Quick Charge 2.0 / 3.0 and Power Delivery is recommended)
* Please purchase the charging adapter separately.
■ Body size 120x92x34 (mm)
■ Weight 195g
■ Number of charging 1-4
■ Compatible batteries NiMH, NiZn, Li-Ion, LiHV, LiFe AAA type (AAA), AA type (AA), 10440, 10500, 12500 , 13500, 13650, 14500, 14650, 16650, 17650, 17670, 18650, 18700, 20650, 20700, 21700, 22650, 26650, 26700 * Batteries longer than 70mm cannot be used

■Length 461mm

■Width 195mm(Body width:210mm)
■Wheelbase 260mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length: 570mm
■Width: 450mm
■Height: 281mm
■Weight 5,040g
■Wheelbase: 360mm
■Tread F:339mm R:343mm
■Tire (F＆R):164 x 104mm
■Gear Ratio: 8.68：1
■Motor: KSH TORX 8+ kv2300

＜ Readyset Contents ＞
●Pre-assembled chassis with pre-set control linkages
●Factory assembled printed body
2.4GHz Syncro KT-231P+ transmitter
●L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
●Cross wrench
●17mm wheel wrench

＜ Required for Operation ＞
●4 x AA alkaline batteries for transmitter
●Running battery (2 x 7.2v Ni-MH to 2 x7.4v lipo battery)
●Charger
●Stabilized power supply

■Length 490mm
■Width 195mm(Body width:208mm)
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

<Kit Contents>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Installed 60A waterproof electronic speed controller (forward/brake/reverse)
●+5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw
●Hexagonal wrench
●Spanner

<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools

Preglued USA-1 tire and wheel set. Includes 2pcs

Can be mounted on the FAZER Mk2 series FZ02L-BT / FZ02L VE-BT chassis.
Body accessory parts with plated finish improve scale realism for body shell, protector parts protect the roof when turn over, polycarbonate rear spoiler, decals and masking sheets used for the ready set. Comes with decoration decals for customized body shell you wish. The LED light unit series (#97054) sold separately can be installed in the light buckets.
Finished body size: Approximately 378x154x135mm (excluding mirrors)

INFERNO MP10 TKI2 Spare parts

Spare tires & white wheels for the Mad Van VE. By using with EZT001S, FA535-S20, FA535-76 and 1-S14018H, wheels can be equipped on the Rage 2.0 chassis(34411).

Speed controller for 60A waterproof sensorless brushless motor. Cooling fan helps to protect the ESC from overheat and supply stable power. Input voltage : 2-3S LiPo (7.4-11.1V) or 6-9S NiMH battery (7.2-10.8V). Size : 48.5x38x32mm (including cooling fan) / Continuous maximum current : 60A / Peak current : 390A / Weight : 90g / Bec output : 6V/3A

Sensorless brushless motor 4000kv (shaft diameter : 3.175mm) for 2S LiPo. The main body has a dustproof structure to avoid maintenance. Suitable for 1/10 On and Off-road cars. Weight : 205g

■Length   486mm
■Width  （Body width） 190mm（200mm）
■Height 144mm
■Wheelbase   274mm
■Tread (F/R)     F：174mm／R：174mm
■Tires (F/R)     F：φ66×25mm／R：φ66×25mm
■Gear Ratio     6.5：1
■Weight        1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 500mm
■Width 195mm(Body width:210mm)
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system  Syncro KT-231P+
■Motor  G14L

Spare 3pcs flywheel for the Inferno NEO / NEO ST / GT2

Carbon center bulk plate for the MP10. Carbon allows lighter weight without sacrificing durability.

Roll damper for R246-2351 MML Motor Mount. Oil damper is sold separately. Compatible dampers: R246-1360, R246-1221, and MZW432.

Aluminum MM2 type motor mount.
Features:
- Precision lightweight design achieves less than 7g in weight while maintaining sufficient rigidity
- Compatible with R246-1362 roll damper as well as MZ217 standard plastic one

Roll damper for R246-1361 and MZ217 MM2 Motor Mount.
Features:
- Blue anodized precision machined aluminum with shiny finished edges
- Recommended using with R246-1360 oil damper
- Can be assembled in L, LL and 3L wheelbases

■Length 507mm

■Width 195mm(Body width:210mm)
■Height 136mm
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Channels 3
■Frequency 2.4GHz
■Modulation System FHSS telemetry system
■Size Transmitter：W105mm x L175mm x H230mm
Receiver：W37.9mm x L22.5mm x H13mm 
■Weight  Transmitter：390g　/　Receiver：5.7g
■ESC Power Source　2-3S Li-Po/5-9cellNi-Mh
■ESC Continuous current 60A
■Range 100m

Mini Z Body Shell

Spare part for MINI-Z RWD series & FWD series.
Features steering / throttle trim as well as dual rate adjustment of steering angle
and control the flashing speed of optional LEDs.
The sponge grip of the steering wheel provides comfortable fit for precision control feel.
In addition, the transmitter has a Training Mode feature which limits speed
of the car for easy learning.
(default setting at the time of shipment is Training Mode)

■ Number of channels 4 channels
■ Weight 398g
■ Power supply 4 AA alkaline batteries
■ Compatible model Car & boat
■ RF range 2.405-2.475GHz
■ 2.4GHz system FHS (MINI-Z) / FHSS 1Way (KR-331) / FHSS 2Way (KR-431T)
■ Low voltage warning 3.7V or less
■ Steering range 66 ° (45 ° left and right)
■ Throttle range 45 ° (front and rear angle 30 °)
■ Certification CE0678.FCC

General-purpose parts

Spare parts for the FAZER MK2

Spare air cleaner for the KE21SP/KE25SP engine

Front shock stay (5.0mm thick) for the INFERNO NEO 3.0 Readyset

Metal universal joint. Durable metal components efficiently convey power under high load condition.

Spare parts for the FANTOM EP 4WD

Spare parts for the FANTOM EP 4WD

Spare parts for the MP10T

Mercedes AMG GT3 white body for the MINI-Z MR-03 series

Spare parts for the Nitro Tracker

Spare Parts for PLAZMA Lm