There are 1573 products.
Optional parts for the INFERNO MP9/MP10.
Currently line-up from 2.1mm to 2.8mm by 0.1mm difference. Add new item by 2.9mm to increase setting variety.
Aluminum shock set for Fazer MK2 TC chassis.
Includes 2pcs soft springs of #FAW224.
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.
Spring set is softer and 0.5mm shorter than MZW401. Delivers superior performance when combined with MZW415 aluminum upper arm and MZW416 inner tube shock. Includes 5 types.
Maintains smooth drive transmission and bend resistance, even in hard crashes.
Knuckle set for changing rear camber. 3 angle types.
■MDW005-15 / MDW005-30 / MDW005-45
Separate type clutch shoe is included with the Readyset.
◼︎BOOK: Actual car & mini car manual ◼︎Mini car: Motul Autech Z #23 2022 BOOK: A4 color, 16 pages total Mini car size (approx.): Body 7.5cm Mini car material: Zinc alloy, ABS resin, PVC (non-phthalate), polystyrene Gimmick: No opening/closing mechanism Display pedestal: included Click here for the special page >
■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (Can be changd by replacing rear hub collars）
■Tread（F/R）254mm
■Tires（F/R）sold separately
■Gear Ratio 10.14: 1
■Weight 3,390g (approx.)
<Kit Content>
●Unassembled kit set
●Wing
●Clear body
●Window mask sheet
●Logo Decal
●Ring gear grease
●Hexagonal wrench (1.5/2.0/2.5/3.0mm)
●Cross wrench
●Wheel wrench
＜Required for Operation＞
●2-channel 2-servo R/C system for cars
●Servo
●Battries for chassis(2S Lipo x2 Recommendation）
●Charger
●Motor
●ESC
●Tire & Inner sponge (for 1/8 Buggy)
●Wheel
●Silicone oil for Shock
●Silicone oil for Diff
●Paint for coloring body (*spray paint for polycarbonate)
●Instant adhesive
●Tools
●Screw lock material
World limited 300 pieces
■ Resin model
■ Shield body
■Length 395mm
■Width 249mm
■Height 148mm
■Wheelbase 277mm
■Tread（F/R） F：221mm/R：201mm
■Tires（F/R） Sold separately
■Gear Ratio 1st Deceleration：Spur 72T／Pinion Gear sold separately 2nd Deceleration：2.6：1
<Kit Contents>
●Unassembled kit set
●Clear body
●Wing
●Ball Differential Grease
●Grease
●Tool （1.5/2.0/2.5mm Hexagonal wrench、Cross wrench）
<Required for Operation>
●2ch～3ch transmitter & receiver for R/C cars
●Servo
●ESC
●Motor
●Pinion gear
●Tires
●Tire inners
●Battery for chassis
●Battery charger
●Paint for body
■Length 143.5mm
■Width 70.0mm
■Height 56.0mm
■Chassis MR-04N-HM
■Wheelbase 90.0mm （M）
■Tread F:59.5mm R:57.0mm
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide -1.0mm
■Weight 169g
■R/C System Syncro KT-531P KT-531P
<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels
<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter
■Length 410mm
■Width 230mm
■Height 180mm
■Height 270mm
■Tread (F/R) 190mm
■Tire (F/R) φ100×35mm
■Gear Ratio 8.76:1
■Weight 約1,880g（approx.）
■Motor 540class G22
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench
<Require to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools
Spare Parts for ULTIMA RB5 SP2/Option Parts for ULTIMA RB5 series
■Length 572mm
■Width 274mm
■Height 214mm
■Wheelbase 340mm
■Tread F/R 224mm
■Tires（F & R） φ110 x 47mm
■Gear Ratio 10.41:1
■Weight 3,410g (approx.)
■Motor TORX10L Brushless Motor kv2850
<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner
<Required for Operation>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery
Main chassis for MA-020/VE installed with gold plated terminals for superior conductivity.
