This set only come with Controller, doesn't include any receiver.

●Inner Sponge to be fit for M17 & MT-44
is attached inside.
●Key is included.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

Exquisite finish and realistic appearance. A complete body series that can be enjoyed as a high-quality display that provides the joy of decorating.
* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

■Length: 550mm
■Width: 410mm
■Height: 210mm
■Wheelbase: 355mm
■Tread (F/R): 345mm / 345mm
■Tire (F/R): 148 x 66mm / 148 x 66mm
■Gear Ratio: 17.2：1
■Weight: 4,650g
■Motor: KSH TORX 8 kv2000

Narrow Tires and added small exteriors

■ Number of channels 4 channels
■ Weight 398g
■ Power supply 4 AA alkaline batteries
■ Compatible model Car & boat
■ RF range 2.405-2.475GHz
■ 2.4GHz system FHS (MINI-Z) / FHSS 1Way (KR-331) / FHSS 2Way (KR-431T)
■ Low voltage warning 3.7V or less
■ Steering range 66 ° (45 ° left and right)
■ Throttle range 45 ° (front and rear angle 30 °)
■ Certification CE0678.FCC

Spare air cleaner for the KE21SP/KE25SP engine

Spare parts for the MAD CRUSHER / FO-XX. Included Front Housing parts and screws as 1 set. Not compatible with MA002, MA004F and MA331.

Spare parts for the FANTOM EP 4WD

Spare parts for the MP10T

Mercedes AMG GT3 white body for the MINI-Z MR-03 series

Yellow colored Javelin roll cage body.

＜Chassis＞
■MINI-Z MR-03W-MM 
＜Technical Data＞
■Wheel Base：L（98mm）
■Wheel Off Set：F:N+-0.0 R:W+-0.0
■Wheel Width：8.5mm / R：11mm
■White Body No.：MZN181
■F.Body Mount No.：MZN181

■Overall length 162.0mm 

■ Overall width 70.0mm 

■ Overall height 53.0mm 

■ Wheelbase 90.0mm (M)
■ Tread F: 59.5mm R: 59.5mm
■ Chassis used MA-020-N
■ Front wheel offset Narrow + 1.5mm
■ Rear wheel offset Wide + 1.5mm
■ Used radio Syncro KT-531P

■Length 197.3mm
■Width 87.3mm
■Height 89.1mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 234g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 172.5mm
■Width 75mm
■Height 49.0mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

■Length 172.5mm
■Width 75mm
■Height 49.0mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm (for RWD)
■Rear Wheel Offset Wide +1.5mm (for RWD)
■R/C System Syncro KT-531P

■Length 464mm
■Width 200mm
■Height 123mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter
■Max Speed 64Km(approx.)

■Length　490mm
■Width　307mm
■Height　180mm
■Ground Clearance　28mm
■Wheelbase　325mm (4 settings available by changing rear hub collar position)
■Tread (F/R)　254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R)　φ116 x 44mm
■Gear Ratio　11.7:1
■Weight　3,370g approx.
■Engine　KE21SP (recoil starter installed/rear exhaust)

■Length 　490mm
■Width 　307mm
■Height　180mm
■Wheelbase　325mm (can be changed with rear hub collar)
■Tread (F/R)　254mm
■Tires (F/R)　φ116×44mm
■Weight　3370g (approx..)
■Motor　KYOSHO SPEED HOUSE TORX 8 Brushless Motor

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

■Length 469mm
■Width 307mm
■Height 189mm
■Wheelbase 325.5mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ116×44mm／φ116×44mm
■Gear Ratio 11.56：1
■Weight 3,400g (approx.)
■Engine KE21SP
■Transmitter 2.4GHz Syncro KT-231P+

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

Stunning red anodized aluminum link rods for better appearance. For 120mm wheelbase.

Size: 35.8x51.2mm
Shaft size: 3.175x17mm
Weight: Approximately 180g
Number of turns: 21.5T
Operating voltage: Max 12.8V (2 to 3S LiPo compatible)
kv value: 1950 (rpm / V)
Maximum rotation speed (at 7.4V) : 14430rpm
Maximum current: 30A
Maximum output: 260W
Maximum efficiency: 91%

●FH5U: SXR(SANWA XTREME RESPONSE) MODE-COMPATIBLE
●SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●PGS SETTING GEAR-COMPATIBLE
●SUPER RESPONSE (SSR) MODE-COMPATIBLE
●HIGH RESPONSE (SHR) MODE-COMPATIBLE
●Li-Po 2 CELL-COMPATIBLE
●LOW PROFILED
●HIGH SPEED TYPE
●BRUSH LESS MOTOR
●FULL ALUMINUM CASE
●FULL METAL GEAR (Strengthening Gears)
●AL HEAT SINK
●Black Harness

■Length 461mm
■Width 210mm
■Height 135mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 1300mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

This is the Pro-Line "Type-R" 1/8 Buggy Body for the Hot Bodies D812 1/8 buggy. From the mind of Pro-Line Team Driver Ty Tessmann comes the Type-R, featuring a unique mid-cab look and undercut side pods that break away from all of the recent cab forward trends. The Type-R fits perfectly around the chassis, while the kick up in the rear of the body provides balanced front to rear down force.

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.

Features:

• Ty Tessmann Inspired Type-R Body Styling
• 2014 Nitro Challenge Winning Body
• Unique Mid-Cab look and balanced Down Force
• Made with Crystal Clear Genuine GE Lexan®
• Made in the USA, since 1982

Includes:

• (1) Type-R Clear Body for D812
• Window Masks
• Decal Sheet

■Length 166.5mm
■Width 75.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F : 68.5mm R : 65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+1.5mm(for RWD)
■Rear Wheel Offset Wide +1.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread  F : 68.5mm R : 66.0mm
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 345mm
■Width 172mm
■Height 83mm
■Chassis type　Chain drive4WD
■Wheelbase 199-200mm（Adjustable）
■Front tread 135mm
■Rear tread 133mm　
■Weight approx.1,500g(with GAB4201）
■Motor 540class（both sold separately）
■1st gear ratio 3.38：1
■Front tire diameter φ48
■Rear tire diameter φ53
■Front tire width 23mm
■Rear tire width 35mm
■Used propo 2～3ch 2servo
■※Maximum Speed 約55km/h (with Le Mans480T BL）
■※Driving Time approx.23minutes(with Le Mans480T BL）

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                    34.65：1/30.80：1/27.72：1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 177mm
■Width 78mm
■Height 47.5mm
■Wheelbase 98mm （LL）
■Chassis RWD (MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow +3.0mm (for RWD)
■Rear Wheel Offset Wide +3.0mm (for RWD)
■R/C System Syncro KT-531P

■Length 464mm
■Width（Body width） 200mm（207mm）
■Height　126mm
■Wheelbase 260mm
■Tread (F/R) F：174mm／R：174mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm
■Gear Ratio 6.5：1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L

■Length 178.0mm
■Width 80.0mm
■Height 45.0mm
■Wheelbase 102.0mm（3L）
■Tread F : 68.5mm R : 65.0mm
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +3.5mm
■Front Wheel Offset Wide +1.0mm
■R/C System Syncro KT-531P

■Length 490mm
■Width 307mm
■Height 180mm
■Wheelbase 325mm (Can be changd by replacing rear hub collars）
■Tread(F/R) 254mm
■Tires(F/R) (sold separately)
■Gear Ratio 10.87 : 1　Pinion 14T
■Weight 3,650g (approx.)
■R/C system 2～3ch (sold separately)

Domestic limited number: 150

■Length 174.0mm
■Width 75.0mm
■Height 45.5mm
■Wheelbase 98.0mm （LL）
■Tread Wide
■Chassis RWD（MR-03）
■Motor Mount MM
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

■Length 463mm
■Width 220mm
■Height 129mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

■Length 1400mm
■Width 1600mm
■Weight EP/2,550g (approx.), GP/2,450g (approx.)
■Motor 600-1000W BL Motor (sold separately)
■Engine 2 Cycle 40-46 class engine (sold separately)
■Battery (EP) 14.8V-4,000-5,000mAh Li-Po battery (sold separately)
■Main Wing Area 44dm2
■Wing Loading 55.7-55.9g/dm2
■Airfoil Original semi-symmetrical
■Propeller size D11 x P7-D12 x P8 (sold separately)
■Tire size Nose 60mm / Main 60mm
■Dihedral 2.5°
■Side Thrust 2°
■R/C system (EP) 4ch, 4 servo, 1 ESC (sold separately)
■R/C system (GP) 4ch, 5 servo (sold separately)

Exude presence of the "R"

Futaba's flagship 7PX has been the choice of many of the World's top drivers for its incredible response, speed & reliability.
The 7PX has evolved, meeting the demanding and ever-changing needs of today's drivers, introducing the 7PXR

The evolution of "R" means a newly tuned device that will integrate seamlessly with driver and transmitter to bring an experience far beyond expectations.
The 4.3-inch full-color touch screen, telemetry system, new shape throttle trigger along with advanced functions that are unmatched by our competitors are what you the driver expects, the NEW 7PXR delivers.

Here you will find the details of Futaba's latest evolution of "R", evolve you're driving with Futaba's 7PXR.

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD（MR-03）
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 193mm
■Width 84mm
■Height 90.0mm
■Chassis Type MX-01
■Wheel Base 120mm
■Tread F/R:72.7mm
■Weight 242g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/46.20：1/39.60：1
                     39.60：1/34.65：1/34.65：1
■Front Tire Diameter Φ37.0mm
■Rear Tire Diameter Φ37.0mm
■Front Tire Width 12mm
■Rear Tire Width 12mm
■Battery 4 x AAA Alkaline
■Transmitter Syncro KT-531P
■Speed：Approx. 2.7km/h〜5.4km/h  (Pinion gears 10T〜 20T)
■Running Time Approx. 60 mins

■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
                     27.72：1/39.60：1/34.65：1 　
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h  (Pinion gears 10T〜 20T) 
■Running Time Approx. 60 mins

■Length 200.5mm
■Width 87mm
■eight 86.0mm
■Chassis Type MX-01
■Wheel Base 110mm
■Tread F/R:72.7mm
■Weight 223g (excl. battery)
■Motor/Engine 130 Class
■Gear Ratio 55.44：1/30.80：1/46.20：1
                     27.72：1/39.60：1/34.65：1 　
■Front Tire Diameter Φ42.0mm
■Rear Tire Diameter Φ42.0mm
■Front Tire Width 14.3mm
■Rear Tire Width 14.3mm
■Battery 4 x AAA alkaline
■Transmitter Syncro KT-531P
■Speed Approx. 3.3km/h〜6.6km/h  (Pinion gears 10T〜 20T) 
■Running Time Approx. 60 mins

M17 Aluminium Option Part Blue Colour

M17 Aluminium Option Part Red colour

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx

■Length 660mm ■Width 160mm ■Height 325mm ■Weight 1,500g approx. ■Motor 540-class G24 motor with water-cooling jacket ■Screw D31 x P1.4 (polycarbonate) ■Charging Time 8 hours approx. 16km/h approx. ■Operation time 7 min approx.

■Length 460mm
■Width 200mm
■Wheelbase 260mm
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 383mm
■Width 323mm
■Height 200mm
■Wheelbase 273mm
■Tread (F/R) 250mm/250mm
■Tires (F & R) φ110×70mm
■Gear Ratio 11.69:1
■Motor 550 size G14L
■Weight 2,050g (approx.)(When using 7.2V3600 NiMH)

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

■Length 165.0mm
■Width 70.0mm
■Height 46.0mm
■Wheelbase 94.0mm（L）
■Tread F : 59.5mm R : 59.5mm
■Chassis MA-020-N
■Front Wheel Offset Narrow +1.5mm
■Front Wheel Offset Wide +1.5mm
■R/C System Syncro KT-531P

Spare parts for the Ultima

■Length　163mm
■Width　105mm
■Height　46mm
■Wheelbase　115mm
■Tread（Ｆ/Ｒ）　89mm/89mm
■Tires（Ｆ/Ｒ）　Sold Separately
■Weight　200g approx.
■Motor　SPEED HOUSE XSPEED 85 (8500KV)

＜Chassis＞
■MINI-Z MA-020-N
＜Technical Data＞
■Wheel Base：M（90mm）
■Wheel Off Set：F:N+2.5 R:W+-0.0 
■Wheel Width：F：8.5mm（Drift） / R：11.0mm（Drift）

■全長 117.7mm
■全幅 70～76mm
■全高 35mm
■ホイールベース 98.0mm（LL）
■トレッドF：61.5～63.0mm／R：61.5～63.0mm
■モーターマウント MM2
■タイヤ（F／R） φ25×8.5mm（別売）／φ25×8.5〜11mm（別売）_
■ギヤレシオ 7.3、6.3、5.5、4.9：1
■全備重量 約135g （ボディなし）
■モーター KYOSHO SPEED HOUSE / XSPEED 56 (5600KV)

1,000 limited

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）

＜Chassis＞
■MINI-Z MR-03W-MM
＜Technical Data＞
■Wheel Base：LL（98mm）
■Wheel Off Set：F:N+1.5 R:W+1.5 
■Wheel Width：F：8.5mm（N） / R：11mm（W）