*Scale: 1/27.6 *Length: 126.0mm *Width: 65.0 - 76.0mm (adjustable by wheel offset) *Height: 36.0mm *Chassis Type: MA-030 *Wheelbase: 94.0mm (only with strut rear suspension installed), 98.0mm (factory assembled) *Weight: 135g *Brushless 8500KV *Gear Ratio: 7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1 *Tire Diameter (F/R): sold separately *Tire Width (F): sold separately *Tire Width (R): sold separately *Transmitter: sold separately *Top speed: approx. 17km/h *Runtime: approx. 50min.

■Length 561mm
■Width 262mm（with body）
■Height 231mm（with body）
■Wheelbase 335mm
■Tread （F/R） 204mm/204mm
■Tires （F/R interchangeable） φ108×38mm
■Gear Ratio 12.65：1
■Weight  2600g (approx.)

Go safe on runtime with our maximum capacity pack of the Shorty Lineup! 
Perfect for power hungry tracks (and drivers) and overtime races.

The battery for any situation where you need the maximum power over the whole run. Lowest IR in our StockSpec Line! 

Perfect for fast tracks if you can handle the weight - this pack will be your choice. 

HV LCG Modified GRAPHENE-3 Ideal weight for 1/10 touring cars combined with low center of gravity design and increased capacity. Perfect car balance and power for fast modified tracks.

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 181.0mm
■Width 78.0mm
■Height 40.0mm
■Wheelbase 102.0mm （3L）
■Tread Wide
■Chassis RWD（MR-03） 
■Motor Mount LM
■Front Wheel Offset Narrow +2.7mm
■Front Wheel Offset Wide +0.8mm
■R/C System Syncro KT-531P

■Length 507mm
■Width 195mm(Body width:210mm)
■Wheelbase 274mm
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

Length　159.0mm 
Width　70.0mm
Height　45.0mm
Wheelbase　90(M)mm
Tread (F/R)　59.5mm／59.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Length　155.0mm
Width　71.0mm
Height　48.0mm
Wheelbase　90(M)mm
Tread (F/R)　58.5mm／58.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Length　155.0mm
Width　70.0mm
Height　50.0mm
Wheelbase　90(M)mm
Tread (F/R)　57.5mm／57.5mm 
Tire(F/R)　F8.5 mm／F8.5 mm (drift tires)
Gear Ratio　7.23, 6.38, 6.0, 5.71, 5.34, 4.97, 4.5 : 1
Weight　193g (approx.)
Motor　130 class

Spare parts for the Ultima RB7

Spare parts for the Ultima RB7

Spare Parts for TURBO SCORPION

Spare Parts for TOMAHAWK

Spare parts for the TURBO OPTIMA. Optional parts for the OPTIMA and JAVELIN.

Option parts for Hang-on Racer

Spare Parts for DIRT HOG, Turbo Optima, Turbo Scorpion, Javelin

USB-powered quick charger compatible with AA and AAA nickel-metal hydride batteries.
71998 KYOSHO SPEED HOUSE 800HV Excellent compatibility with AAA nickel metal hydride batteries.

Compact AA / AAA NiMH charger powered by USB. Up to 1A charging per slot. USB power supply sold separately.

＜Chassis＞
■MINI-Z MR-03W-MM 
＜Technical Data＞
■Wheel Base：L（98mm）
■Wheel Off Set：F:N+2.5 R:W+3.0
■Wheel Width：8.5mm / R：11mm
■White Body No.：MZN195

■Length 158.0mm
■Width 72.0mm
■Height 43.0mm
■Wheelbase 98.0mm （LL）
■Tread F:61.5mm R:59.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow　+0.0mm(for RWD)
■Rear Wheel Offset Wide +0.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 166.0mm
■Width 78.0mm
■Height 44.0mm
■Wheelbase 98.0mm （LL）
■Tread F:66.5mm R:65.0mm
■Chassis RWD(MR-03)
■Motor Mount MM
■Front Wheel Offset Narrow+2.5mm(for RWD)
■Rear Wheel Offset Wide +3.0mm(for RWD)
■R/C System Syncro KT-531P

■Length 484mm
■Width 195mm(Body width:210mm)
■Wheelbase 274mm 
■Tread (F/R) F：167mm／R：167mm
■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm
■Gear Ratio 6.54：1
■Weight  1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length  550mm  
■Width  427mm  
■Height  225mm  
■Wheelbase 355mm  
■Tread（F/R） 289mm / 289mm  
■Tires（F/R） Φ148×66mm / Φ143×66mm  
■Gear Ratio 14.6：1 
■Weight  3,750g approx.
■Engine  KE25SP
■Transmitter 2.4GHz Syncro KT-231P+

Option parts for TURBO SCORPION

Optional parts for the TURBO OPTIMA. 
Color variation of 50mm wheel. 
When use with #OTT244M, it can be used as optional parts for the OPTIMA and JAVELIN.

Spare parts for the TURBO OPTIMA.  
Optional parts for the OPTIMA and JAVELIN.

Aluminum shock set for Fazer MK2 TC chassis. 
Includes 2pcs soft springs of #FAW224. 
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.

■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm/Φ86×23mm
■Gear Ratio 13.80：1～19.30：1
■Weight 750g (approx.)
■Motor Le Mans DM20

■Length  167mm
■Width  106mm
■Height  68mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

■Length  167mm
■Width  106mm
■Height  68mm
■Wheelbase 115mm
■Tread (F/R) 89mm/89mm
■Tire(F/R) F37 x 13.5mm/F37 x 18.5mm
■Weight  200g (approx.)
■Motor  130 class
■Battery AAA alkaline x 4
■R/C System KT-531P FHSS 2.4 GHz

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires （F & R） φ150×70mm
■Gear Ratio 25.7/19.8/15.6:1
■Weight 4,700g (approx.)
■Engine KE25SP with recoil starter

■Length 　490mm
■Width 　307mm
■Height　180mm
■Wheelbase　325mm (can be changed with rear hub collar)
■Tread (F/R)　254mm
■Tires (F/R)　φ116×44mm
■Gear Ratio　12.6 : 1 (gear module : 1.0)
■Weight　3400g (approx..)
■Motor　KYOSHO SPEED HOUSE TORX 8 Brushless Motor

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires（F & R） φ150×70mm
■Gear Ratio 20.52：1
■Weight 4,700g (approx.)
■Motor KYOSHO SPEED HOUSE・TORX 8 Brushless Motor

■Length 590mm
■Width 376mm
■Height 275mm
■Wheelbase 351mm
■Tread 306mm
■Tires （F & R） φ150×70mm
■Gear Ratio 20.52:1
■Weight 4,700g(approx.)
■Motor Team ORION NEON 8 Brushless Motor

■Length　690mm (hull length 600mm)
■Width　178g
■Height　240mm
■Weight　1,300g approx.
■Motor　Water-cooled G20 
■Speed controller　Waterproof KA060-91W    
■Transmitter　Syncro KT-231P+
■Propeller　D42 x P1.4
■Servo　Waterproof KS4031-06W

Limited 700 pieces

limited 700 pieces

■Length 460mm
■Width 200mm
■Wheelbase 260mm 
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm 
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 460mm
■Width 200mm
■Wheelbase 260mm 
■Tread (F/R) F：184mm／R：184mm
■Tires (F/R) F：φ66×25mm／R：φ66×25mm 
■Gear Ratio 6.5：1
■Weight  1620g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 372mm
■Width 200mm
■Height 100mm (approx.)
■Ground Clearance　5mm
■Wheelbase　258mm
■Tread (F/R)　176mm
■Tire(F/R)　φ66×25mm
■Gear Ratio　7.47 / 5.44:1
■Weight　1,800g (approx.)
■Engine KE15SP with recoil starter

For Hanging On Rider

■Length  117.7mm
■Width    F：70〜75mm／R：70〜76mm
■Height    35mm
■Wheelbase   98.0mm (LL)
■Tread      F：61.5〜66.5mm／R：61.5〜65mm 
■Tires (F/R)     φ25×8.5mm (sold separately)/φ25×8.5〜11mm (sold separately)
■Gear Ratio     7.3、6.3、5.5、4.9：1
■Weight           g (approx.)
■Motor      KYOSHO SPEED HOUSE/12000KV Brushless Motor

■Length  166.0mm
■Width  70.0mm
■Height  52.0mm 
■Wheelbase 98.0mm （LL）
■Chassis FWD（MA-03F） 
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P

■Length  166.0mm
■Width  70.0mm
■Height  52.0mm 
■Wheelbase 98.0mm （LL）
■Chassis FWD（MA-03F） 
■Front Wheel Offset Narrow +1.5mm (for AWD)
■Rear Wheel Offset Narrow +1.5mm (for AWD)
■R/C System Syncro KT-531P

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

■Length 555mm (with body)
■Width 262mm (with body)
■Height 231mm (with body)
■Wheelbase 335mm
■Tread (F/R) 204mm/204mm
■Tires (F/R interchangeable) φ108×38mm
■Gear Ratio 12.65 : 1
■Motor 15 turn 540 type (G15 motor)
■Weight 2,000g approx.

■Length   390mm
■Width    281mm
■Height      165mm
■Wheelbase   274mm 
■Tread (F/R)     F：235mm／R：235mm
■Tires (F/R)     F：φ105×52mm／R：φ105×52mm 
■Gear Ratio     10.49：1
■Weight        2080g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length   390mm
■Width    281mm
■Height      165mm
■Wheelbase   274mm 
■Tread (F/R)     F：235mm／R：235mm
■Tires (F/R)     F：φ105×52mm／R：φ105×52mm 
■Gear Ratio     10.49：1
■Weight        2080g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length   486mm
■Width    200mm
■Wheelbase   274mm 
■Tread (F/R)     F：174mm／R：174mm
■Tires (F/R)     F：φ66×25mm／R：φ66×25mm 
■Gear Ratio     6.5：1
■Weight        1650g (approx.)
■R/C system      Syncro KT-231P+
■Motor      G14L

■Length 385mm
■Width 248mm
■Height 145mm
■Wheelbase 278mm
■Tread（F/R） 210mm / 200mm
■Tires（F/R） Sold separately
■Gear Ratio 2.5：1（2nd）
■Weight 1,650g (approx.)
■Motor Sold separately

■Length 395mm
■Width 249mm
■Height 148mm
■Wheelbase 277mm 
■Tread（F/R） F：221mm/R：201mm
■Tires（F/R） Sold separately
■Gear Ratio 1st Deceleration：Spur 76T／Pinion Gear sold separately 2nd Deceleration：2.6：1
■Weight 1,550g (approx.)

LED light unit set equipped with two white LEDs on the front and two red LEDs on the rear.

Compatible with the following models:
- MINI-Z RWD
- MINI-Z FWD
- MINI-Z AWD (with KT-531P transmitter)
- MINI-Z 4x4
- MINI-Z Buggy (with KT-531P transmitter)
- MINI-Z Buggy VE (FHSS)
- MINI-Z Sports series

Parts set for extending wheelbase of AWD Sports to LL. Now compatible with bodies for LL size wheelbase.
※Requires optional spur gear set (for AWD DWS)/No.MDW100-04

Absorbs difference in front and rear tire rotation even through small corners to realize ultra-smooth cornering. Suitable for technical courses where quick handling is required.

Spare parts for MP10

Receiver unit for the MINI-Z EVO chassis.
Supports the KT-18 (ASF only), EX-6 and EX-6R (ASF and MHS) transmitters. Also supports KO Propo's EX-2 and EX-RR (MHS only).

＜サイズ＞
■542×300×397mm