Technical data

• Available in Genuine .025" or .030" Lexan®
• Stable, neutral handling
• Bold Dodge® Dart styling
• Officially Licensed Product
• Proudly made in the U.S.A.

• 4-Time IFMAR World Champion Body (2010, 2012, 2014, 2016)
• Attractive Contemporary Styling & Improved Downforce Front and Rear
• Fits Global Body Spec Rules Package
• EFRA APPROVED #4018
• Made in the USA

• Made from Extremely Durable Polycarbonate Material
• Conforms to all the Global Body Spec Criteria
• Enlarged Wing Struts with Nylon Hardware
• Paint-then-Peel Protective Film
• Made in the USA
• EFRA NUMBER: 2039

Price is for 1 pair of Pre Glued tire

• Small Pin Design for the Ultimate in Responsiveness
• A Triumphant Contender on Blue Groove to Wet, Hard Packed Surfaces
• Square-lug Technology Throughout the Tread Design
• Improved Wear and Traction with S-Compound Technology
• Includes Closed Cell Foam

1. High-tech regulator application, output voltage is 1.5V
2. Switching transfer with low heat dissipation
3. Large LCD shows battery status
4. Including Li-Po 1S 1200mAh battery (easily charged with additional micro USB lead)
5. Convenient, economical, pistol-sized design
6. Fits any glow plugs within new 4-cycle plugs

TECHNICAL DATA

Cell chemistry  -  LiPo HV
C-rate  -  120C/60C
Length  -  139.0mm
Width  -  47.0mm
Height  -  17.5mm
Weight  -  215g (+/-4%)
Connectors  -  5mm
Homologated  -  ROAR, EFRA, BRCA

TECHNICAL DATA

Nominal voltage - 7.6V

C-rate - 45C

Style - Hardcase

Connector - US-Style

Balancing - connectorXH

Application - On/Offroad

Length - 137mm

Width - 47mm

Height - 25mm

Weight - 352g

Capacity - 9000mAh

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V 

chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

Features

1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing

Technical data

Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh

FEATURES

LiPo power at a budget price from ANTIX by LRP.

These RC car LiPos are ideal for hobby and amateur drivers looking for power and durability at a budget price.

The special "stickpack" shape is based on the NiMh packs for which many chassis were designed.
Also for the new release of vintage models you get perfectly fitting batteries of the latest technology with 134mm length and additionally slightly offset cable exit, so the battery posts of your chassis do not get in the way.
Equipped with a robust hard case, these 2S LiPo batteries are suitable for tough On- and Offroad use.

TB02 EFRA2089 & MB01-75

Combo Set(TB02 EFRA2089(T2090)+MB01-75(M2000SC)

Spec---------------------------
Displacement： 3.49cc / 0.213 cu.in.
Bore: 16.4mm / 0.646 in.
Stroke: 16.55mm / 0.652 in.
Output 2.65 ps / 2.61 hp / 34,000 r.p.m.
Practical RPM range: 4,000-42,000 r.p.m.
Engine Weight: 350g / 12.35oz

Power for the Sanwa MT-44! This Transmitter battery offers highest Performance. The VTEC LiPo TX-Pack is a true transmitter battery for Transmitters. Its dimensions perfectly match the size of the battery tray.

1. New generation fuel pump with compact size
2. Double injection; using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design; glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19” silicon fuel tubing

■ Combo set
TT02 EFRA2690 (T-1080SC L52) & MT02

accessories

・Plug P4 turbo plug ・Dust cap set 3mm (1 piece) 16mm (2 pieces) ・Exhaust seal ring

Weight-90g

Nominal voltage-7.4V

C-rate-RX-only

Dimensions-84x30x17mm

Capacity-2500

Balancing connector-XHR 3-pole

*Combo set is only for offroad application.

TECHNICAL DATA

Spec.---------------------------
Displacement：3.49 cc / 0.213cu.in.
Bore: 16.08mm / 0.633 in.
Stroke:17.20mm / 0.677 in.
Output 2.8 ps / 2.76 hp / 35,000 r.p.m.
Practical rpm range: 4,000-45,000 r.p.m.
Weight:340g / 11.99 oz.
Standard accessories：
Glow plug RP7 /Dust cap set/Exhaust seal ring
TR02 EFRA2165 /MR03-WC Silencer & Exhaust Manifold
O.S. SPEED Flywheel Colette

WORLD CHAMPION Davide Ongaro
2022 IFMAR 1/8th IC Buggy World Championship

Spec---------------------------
Displacement： 3.49cc / 0.213 cu.in.
Bore: 16.27mm / 0.646 in.
Stroke: 16.80mm / 0.661 in.
Output 2.68 ps / 2.64 hp / 34,000 r.p.m.
Practical RPM range: 4,000-42,000 r.p.m.
Engine Weight: 345g / 12.17oz

Spec:　

• 3.49 cc / 0.213cu.in.
• Bore:　 16.08mm / 0.633 in.
• Stroke:　17.20mm / 0.677 in.
• Output:　 2.65 ps / 2.61 hp / 34,000 r.p.m.
• Practical rpm range:　 4,000-42,000 r.p.m.
• Weight:　 362g / 12.77 oz.

Ideal weight for 1/10 TC racing combined with Low Center of Gravity design.
HV-LiPo Perfect car balance and power for tight tracks.

TECHNICAL DATA

Specs ---------------------------
Stroke volume: 3.49 cc / 0.213 cu.in.
Bore: 16.27mm / 0.641 in.
Stroke: 16.80 mm / 0.661 in.
Output: 2.68 ps / 2.64 hp / 34,000 rpm
Practical rotation speed: 4,000-42,000 rpm
Weight: 352 g / 12.42 oz.
Standard accessory
T plug T-P3 1 piece

Reducer φ6Ⅱ, φ6.5Ⅱ
Exhaust seal ring 1 piece
OS SPEED Dust cap set 12-30 ・ φ3, φ16, φ18 1 each

TECHNICAL DATA

Spec.---------------------------
Displacement： 3.49cc / 0.213 cu.in.
Bore: 16.4mm / 0.646 in.
Stroke: 16.55mm / 0.652 in.
Output: 2.65 ps / 2.61 hp / 34,000 r.p.m.
Practical r.p.m.Range: 4,000-42,000 r.p.m.
Weight: 362g / 12.77oz

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

• Use a WORLD CHAMPION Tire like the Pros
• Available in M3, M4 and S3 Compound
• Extra Tread Wear for Your Money
• Long Lasting Tread yet still Fast and Agile
• Incredible Performance to Cost Ratio
• Perfect for Extreme Wear Conditions with Little Dust
• Improved Traction with S-Compound Technology
• Long lasting Closed Cell Inserts Included
• Made in the USA, since 1982 - Read about Pro-Line Racing's History

This is the Pro-Line "Type-R" 1/8 Buggy Body for the Hot Bodies D812 1/8 buggy. From the mind of Pro-Line Team Driver Ty Tessmann comes the Type-R, featuring a unique mid-cab look and undercut side pods that break away from all of the recent cab forward trends. The Type-R fits perfectly around the chassis, while the kick up in the rear of the body provides balanced front to rear down force.

NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.

Features:

• Ty Tessmann Inspired Type-R Body Styling
• 2014 Nitro Challenge Winning Body
• Unique Mid-Cab look and balanced Down Force
• Made with Crystal Clear Genuine GE Lexan®
• Made in the USA, since 1982

Includes:

• (1) Type-R Clear Body for D812
• Window Masks
• Decal Sheet

Meet the small brother of the successful Pulsar Pro charger. The Pulsar Sport has everything that you need for your battery management. The integrated power supply allows you to directly connect it either to
a AC wall socket or to DC sources like car batteries. You don’t need a separate power supply anymore.

Of course, the currently highly sought after HV LiPo battery packs with up to 8.7V (2S) charging are no problem for the Pulsar Sport. It supports LiPo HV charging, making it fully prepared for any future tasks.

Like with all current LRP chargers, the Pulsar Sport also offers a USB charge port (5V/1.0A) that is suitable for smartphones and MP3 players.

Shoki Takahata won the 1st prize of 2019 IFMAR 1/8 IC Track World Championship held in Steel City Speedway, California, USA on 02 November, and Takaaki Shimo won the 2nd.　　 Both of them used O.S. SPEED R2104. It is the first time for O.S. Engines to win the championship in this category. In commemoration of the one-two finish, we are proudly releasing O.S. SPEED R2104 WORLD CHAMPION EDITION. The picture shows a prototype.

The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.

The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.

Specification

Displacement： 3.49cc / 0.213 cu.in.
Bore: 16.08mm/0.633in.
Stroke: 17.20mm/0.677in.
Output 2.8ps/2.76hp/35,000r.p.m
Practical r.p.m.Range: 4,000-45,000 r.p.m.
Weight: 340g / 11.99oz

Go safe on runtime with our maximum capacity pack of the Shorty Lineup! 
Perfect for power hungry tracks (and drivers) and overtime races.

The battery for any situation where you need the maximum power over the whole run. Lowest IR in our StockSpec Line! 

Perfect for fast tracks if you can handle the weight - this pack will be your choice. 

HV LCG Modified GRAPHENE-3 Ideal weight for 1/10 touring cars combined with low center of gravity design and increased capacity. Perfect car balance and power for fast modified tracks.

This is a pair of Blockade Buggy Rear Tires. Pro-Line is bringing the incredibly successful 1/8 Buggy Blockade tire to 1/10 Buggy! If you find yourself racing in loose, dusty or hard-packed conditions with your 1/10 Buggy - you NEED a set of Blockades! The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires. This tire will give your buggy qualifying speed with tread life capable of outlasting the competition. Pro-Line's Blockade is the new must-have 1/10 Buggy Race tire and will dominate your local track. The Blockade - The latest way that Pro-Line is Racing to Bring You The Best!

• High Downforce Aerodynamics
• Ultra Precise Steering Characteristics
• Improved Stability and Forward bite
• Every Detail Considered for Added Rigidity
• EFRA and ROAR Approved
• Mounting Marks for Easy Body Positioning
• Made in the USA

• High Downforce Aerodynamics
• Ultra Precise Steering Characteristics
• Improved Stability and Forward bite
• Every Detail Considered for Added Rigidity
• EFRA and ROAR Approved
• Mounting Marks for Easy Body Positioning
• Made in the USA

• Available in Genuine .025" or .030" Lexan®
• Stable, neutral handling
• Bold Dodge® Dart styling
• Officially Licensed Product
• Proudly made in the U.S.A.

• For: 1:10 EP
• Clear Uncut Body
• Material: Genuine GE .030 lexan & lightweight .025 lexan
• Clear protective film to prevent overspray: Yes
• Meets all GBS/EFRA/IFMAR/ROAR specs
• Fits 190mm TC chassis

• For: 190mm Touring Cars
• Clear Body
• Material: Lexan
• Conforms to all the Global Body Spec criteria
• Paint-then-Peel protective film

• For: 190mm Touring Cars
• Clear Body
• Material: Lexan
• Conforms to all the Global Body Spec criteria
• Paint-then-Peel protective film

• Made from Extremely Durable Polycarbonate Material
• Conforms to all the Global Body Spec Criteria
• Enlarged Wing Struts with Nylon Hardware
• Paint-then-Peel Protective Film
• Made in the USA
• EFRA NUMBER: 2039

• Made from extremely durable genuine .030” Lexan®
• Advanced aerodynamic styling
• Meets all Global Body Spec criteria
• Proudly made in the U.S.A.
• Also available in Light Weight (.025")

• Conforms to All the Global Body Spec Criteria
• Enlarged Wing Struts with Nylon Hardware
• Paint-then-Peel Protective Film
• Made in the USA
• EFRA NUMBER: 2047

• Conforms to All the Global Body Spec Criteria
• Enlarged Wing Struts with Nylon Hardware
• Paint-then-Peel Protective Film
• Made in the USA
• EFRA NUMBER: 2047