There are 126 products.
Active filters
VTEC LIPO 2500 RX-P 7.4V
Weight-90g
Nominal voltage-7.4V
C-rate-RX-only
Dimensions-84x30x17mm
Capacity-2500
Balancing connector-XHR 3-pole
LRP71145 LRP 5000MAH 7.2V...
Features
- High-Power Racing Stickpack
- Higher cycle capability
- Improved quality and more power
- Best value for money
- Ready-to-use complete with US-style connectors
- Fast charge enabled
- Exclusive LRP single cells
- Large application area
- 2.5mm² silicone power wire
- Tested LRP quality, e.g. endurance-tested over 400 continuous charge and discharge cycles
HT-RC C150 10A AC/DC RC...
TITLE:C150 BALANCE CHARGER
MODEL:HT-0097
SPECIFICATIONS
Charge power:AC/DC Input150W
Discharge power:10W
Charge current range:0.1-10A
Discharge current range:0.1-2A
Lilon/LiPo/LiFe/LiHV cell count :1-6cells
NiCd/NiMH battery cell count:1-15cells
PB Battery voltage:2-20V
Smart battery:I/II/III
Current drain for balancing: 500mA/cell
71351 Speed house Ni-MH...
LRP430421 ANTIX by LRP 5900...
Technical data
Voltage - 7.4V
C-rate - 50C
Style - Hardcase
Connector - T-Plug
Balancing connector - XH
Length - 138.00mm
Width - 46.00mm
Height - 25.00mm
Weight - ~310g
Capacity - 5900mAh
PL1305A INTERCHANGEABLE HEX...
INTERCHANGEABLE HEX DRIVER SET
(1.5; 2.0; 2.5; 3.0mm)
LRP431271 HV LCG MODIFIED...
Technical data
PL1322 INTERCHANGEABLE...
INTERCHANGEABLE DRIVER SET:
(HEX : 1.5; 2; 2.5; 3)
(PHILLIPS : PH#1 F4; PH#2 F5)
(FLAT : 4.0 x 0.7mm)
LA429 Front Suspension...
LRP431272 HV HYPER LCG...
TECHNICAL DATA
Cell chemistry - LiPo HV
C-rate - 120C/60C
Length - 139.0mm
Width - 47.0mm
Height - 17.5mm
Weight - 215g (+/-4%)
Connectors - 5mm
Homologated - ROAR, EFRA, BRCA
34936T1 1:8 Scale RC...
■Length 270mm
■Width 98mm
■Height 190mm
■Wheelbase 185mm
■Tire(F/R) Φ78×18mm/Φ86×23mm
■Gear Ratio 13.80:1~19.30:1
■Weight 750g (approx.)
■Motor Le Mans DM20
<Kit Content>
●Chassis kit
●Pinion gear (10T, 12T, 14T)
<Required to run>
●2ch R/C system
●Batteries for transmitter
●servo×1 (Recommended: NoGPW20)
●ESC×1 (Recommended: No.GPW17)
●Battery for chassis(7.2V-1600mAh Ni-MH)
●Charger for battery
●Charger Convert Connector
●Grease(Recommended:No.96508)
●Paint
●Tool
32294 MINI-Z Buggy VE2.0 SP...
■Length 163mm
■Width 105mm
■Height 46mm
■Wheelbase 115mm
■Tread(F/R) 89mm/89mm
■Tires(F/R) φ37×13.5mm/φ37×18.5mm
■Weight 200g approx.
■Motor SPEED HOUSE XSPEED 85 (8500KV)
<Set Contents>
●Factory assembled MB-010VE chassis installed with XSPEED VE brushless motor.
●Pinion gears x 3 (11T, 13T, 15T)
●Spur gears x 2 (33T, 35T)
●Wheel wrench
●Pinion gear tool
●Pairing stick
●Spare wheel nuts
<Required for Operation>
●KT531P transmitter
●Paint for body
●4 x AAA alkaline or Ni-MH batteries for chassis
●4 x AAA alkaline batteries for transmitter (EX-5UR ASF requires 8 x AA alkaline batteries)
34492T1 1970 Dodge Charger...
■Length 507mm
■Width 195mm(Body width:210mm)
■Height 128mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) Fφ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Require to run>
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tools
30618 Kyosho JAVELIN 1/10...
■Length 403mm
■Width 240mm
■Height 130mm
■Wheelbase 260mm
■Front Tread 204mm
■Rear Tread 204mm
■Weight 1,700g (approx.)
■Tires (F & R) φ86×40mm
■Motor 540 Class size(sold separately)
■Gear Ratio 9.24:1
VZ462B Hard Rear Diff....
LA427-78 Spur...
LA427-76 Spur...
LA412 Rear Upper Bulk...
LA411 Front Upper Bulk...
LA407 Aluminum Center Shaft...
LA406 Aluminum Center Shaft...
LA405 Drive Joint Cup...
LA403-02 Diff. Gasket Set...
LA402-04 Gear Diff. Shaft...
SWSGS02 SGS-02 Gyro SXR...
・AL case
・Compatible with SXR
・New Function: Quick-ST
・Compatible with setting by MULTI-SETTING GEAR
87614C KYOSHO CARRYING BAG M
●Carrying Bag for 1/10 ●Considerable materials for heavy duty use. ●Chic black color. ●Plastic cardboard for shelves. ●Outside pocket equipped. ●Equipped with multipurpose slit and travel carrier.
■サイズ
全体:W310 X L510 X H460
内箱1つの内寸:W280 X L455 H135
LAW86 Aluminum Center diff....
LAW85 Carbon Lower Brace...
34494T1 1970 Chevy®...
■Length 490mm
■Width (Body width * excluding mirror) 208mm
■Height 138mm
■Chassis Height 15mm(approx.)
■Wheelbase 274mm
■Tread (F/R) 167mm
■Tires (F/R) φ64×27.7mm
■Gear Ratio 6.54:1
■Weight 1680g (approx.)
■R/C system Syncro KT-231P+
■Motor TORX10E
<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-231P+ transmitter
●Hexagonal wrench
●Spanner
●Setting change parts
<Required for Operation>
●4 x AA batteries for transmitter
●Battery for chassis (recommended: 7.2V Ni-MH battery)
●Charger for battery for chassis
●Tool
LRP430410 ANTIX BY LRP 9000...
TECHNICAL DATA
Nominal voltage - 7.6V
C-rate - 45C
Style - Hardcase
Connector - US-Style
Balancing - connectorXH
Application - On/Offroad
Length - 137mm
Width - 47mm
Height - 25mm
Weight - 352g
Capacity - 9000mAh
VZ413-56B 2nd Spur Gear...
UMW509GMB SP Motor Plate...
UMW509GMB Offical Kyosho website and online shop for Mini-Z, Optima, Inferno and others, including Kyosho diecast models, miniature cars, Kyosho Egg brand and all latest information.
UB015 Carbon Battery Holder...
UB010 Rear Upper Rod Mount...
FA557 TC Spur Gear Shaft...
FA554-2 TC Short Shock...
34312 1:10 Scale Radio...
■Length 378mm
■Width 249mm
■Height 150mm
■Wheelbase 270mm
■Tread (F/R) 221mm/201mm
■Tire F:φ84×33mm R:φ86.5×42mm
■Gear Ratio 8.23:1
■Weight 約1,480g
■Motor (sold separately)
< Kit Contents >
●Unassembled kit set
●Polycarbonate clear body
●Wing
●Window mask seal
●Decals
●Chassis parts
●Cross wrench
●Hex wrench(1.5mm/2.0mm)
●Grease
●Tires, Tire Inners, Wheels
●Pinion Gear(24T)
【REQUIREMENT TO RUN】
■2ch~3ch transmitter & receiver for R/C cars
■Servo
■ESC
■Motor
■Silicone oil for Shock
■Batteries for chassis(2S Lipo Recommendation)
■Charger
■Paint for coloring body (*spray paint for polycarbonate)
■Tool
36231P SP Knife Edge Reamer...
The blade is maked 7mm,9mm,11mm,13mm and 15mm.When using please use the marking as an indicator.
34471T1 Toyota Supra (A80)...
■Length 455mm
■Width(Body width) 200mm(210mm)
■Height 120mm
■Wheelbase 260mm
■Tread (F/R) F:174mm/R:174mm
■Tires (F/R) F:φ64×24.2mm/R:φ64×24.2mm
■Gear Ratio 6.54:1
■Weight 1650g(approx.)
■Syncro KT-231P+ transmitter
■Motor G14L
LRP430408 ANTIX BY LRP 6400...
The very first Antix by LRP product gets an update. Already known from high-end Competition LiPo batteries, the HV-LiPo GRAPHENE battery cell technology now also gained entry into our high-quality budget Antix by LRP LiPo battery line.
The Antix by LRP GRAPHENE cells enable charging up to 8.7V (2S), greatly increasing the power output and runtime. The batteries are still fully compatible to all 8.4V
chargers. If you are charging them only to 8.4V two good things will happen to you. Firstly, the batteries will have a highly improved lifetime. Secondly, the batteries will still have a significantly higher power output at 8.4V charging compared to the 2016 line without GRAPHENE cells.
33025T1S 1:8 Scale Radio...
■Length 490mm
■Width 307mm
■Height 180mm
■Ground Clearance 28mm
■Wheelbase 325mm (4 settings available by changing rear hub collar position)
■Tread (F/R) 254mm (2 front settings and 3 rear settings available by changing bushes)
■Tire (F/R) φ116 x 44mm
■Gear Ratio 11.7:1
■Weight 3,370g approx.
■Engine KE21V (recoil starter installed/rear exhaust)
<kIT cONTENT>
●Factory assembled chassis installed with R/C system
●Printed pre-cut body complete with coloring
●Pre-installed KE21V engine with rear exhaust
●Syncro KT-331P transmitter
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench (small)
●17mm Wheel wrench
<Require for operation>
●AAA x 8 alkaline batteries for transmitter
●Fuel
●Starting tools (Fuel bottle, Plug heater)
LRP430411 ANTIX BY LRP 4200...
FEATURES
- HV-LiPo GRAPHENE cells - New, high power LiPo cells that can be charged up to 8.70V (2S)! Maximum Power!
- 100% compatible for 8.40V (2S) charging - More Power than our 2016 batteries at 8.40V charging!
- 3C Charge current
- 45C LiPo Power - No memory effect, extremely long lifetime
- Perfect tuning option for your RTR car
- Improved Lifetime - Highly improved lifetme when charged to 8.40V (2S) only!
- Best value for money
- No memory effect, extremely long lifetime
- Tested according to latest UN test standards
- Durable hardcase made of high-quality synthetic material for maximum safety
- High-Power LiPo Packs
MZW120OR Mini-Z SP tool...
Kyosho 60th anniversary limited model.
A tool set suitable for MINI-Z. Improved tool tip shape and various usable tools included!Comes with a soft case with a MINI-Z logo.
- Nut driver: 3.5mm, 4.0mm, 4.5mm
- Philips screwdriver: #00, #0, #1
- Hex screwdriver: 1.5mm
LRP431285 HV STOCK SPEC...
TECHNICAL DATA
87615C KYOSHO Carrying Bag L
■Size
Overall:W360 X L560 X H550(mm)
Inner dimensions of one of the inner boxes:W325 X L505 X H160(mm)
■Carrying Bag for1/8
■Considerable materials for heavy duty use.
■Chic black color.
■Plastic cardboard for shelves
■Outside pocket equipped.
■Equipped with multipurpose slit and travel carrier.