Spare parts for the KE21SP engine.

■Length 496mm
■Width 307mm
■Height 189mm
■Wheelbase 323～328mm
■Tread (F/R) 258mm／261mm
■Tire (F/R) φ115×44mm／φ115×44mm
■Gear Ratio 12.7：1
■Weight 3,550g (approx.)
■Transmitter 2.4GHz Syncro KT-231P+

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Finished body complete with printed color scheme
●2.4GHz Syncro KT-231P+ transmitter
●1.5、2.0、2.5、3.0mm L shaped hex wrenches
●Cross wrench
●17mm wheel wrench

<Required for Operation>
●4 x AA alkaline batteries for transmitter
●Traveling battery
●Charger
●Stabilized power supply
●Phillips screwdriver (large, small)

<Kit Contents>
●Chassis kit
●Adhesive shaped tire
●Unpainted body
●Decal
●Wheel wrench（12/4.0）
●5.5/5.0wrench
●Hexagonal wrench
●Caster angle jig
●Shock wrench
●Shock oil
●Ball differential grease

<Required for Operation>
●Radio transmitter with 2 channel, 1-servo(Receiving size: Max 37x30x16.5mm / Servo size: Max 37x16.5x30mm )
●1 Electronic speed controller (ESC size：38x31x23mm)
●540 Class Motor
●Battery for chassis(Battery size：138x48x24.5mm)
●Batteries for transmitter
●Charger for Battery
●Paint for body

■Length 410mm
■Width 230mm
■Height 180mm
■Height 270mm
■Tread (F/R) 190mm
■Tire (F/R)  φ100×35mm
■Gear Ratio  8.76:1
■Weight 約1,880g（approx.）
■Motor  540class G22

<Kit content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Require to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

■Length 410mm
■Width 230mm
■Height 180mm
■Height 270mm
■Tread (F/R) 190mm
■Tire (F/R)  φ100×35mm
■Gear Ratio  8.76:1
■Weight 約1,880g（approx.）
■Motor  540class G22

<Kit Content>
●Completed chassis with R/C radio installed
●Factory assembled body complete with color scheme
●Syncro KT-232P transmitter
●Binding Stick
●Hexagonal wrench
●Cross wrench

<Require to run>
●4 x AA batteries for transmitter
●Battery for chassis
●Charger for battery for chassis
●Tools

Spare parts for Optima Pro.

Optional parts for FAZER Mk2 FZ02-R

Optional parts for FAZER Mk2 FZ02-R.

※FD29　/　1790SG　 (Substitution parts)

Long King Pin for MP9 (EP/GP). Essential parts for racing to prevent knuckle arm from dropping during a hard crash. ※Spare/Option parts for MP9 series.

■Length 572mm
■Width 274mm
■Height 214mm
■Wheelbase 340mm
■Tread F/R 224mm
■Tires（F & R） φ110 x 47mm
■Gear Ratio 10.41:1
■Weight 3,410g (approx.)
■Motor TORX10L Brushless Motor kv2850

<Readyset Contents>
●Factory assembled chassis complete with control linkages
●Pre-cut and painted body complete with decals applied
●2.4GHz Syncro KT-231P+ transmitter
●1.5mm/2.0mm/2.5mm L shaped hex wrench
●Cross wrench
●4/5/5.5/7/10mm Integrated spanner

<Required for Operation>
●AA-size batteries x 4 for transmitter
●Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
●Charger for LiPo battery

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.
■MZW38/10 / MZW38-20 / MZW38-30 / MZW38-40

Option Parts for INFERNO MP9.

Main chassis for MA-020/VE installed with gold plated terminals for superior conductivity.

Spare parts for Mad Bang. This product must be used in combination with FA535-76 Spur Gear 76T FZ02L-B when using EZTH001BKS tires for Rage 2.0.

Spare parts for the Ultima SB Dirt Master.

Option Parts for OPTIMA

Spare parts for the Ultima

Spare parts for the TURBO OPTIMA. 
Optional parts for the OPTIMA and JAVELIN.

Optional parts for the TURBO OPTIMA.
When use with #OTH245W, it can be used as optional parts for the OPTIMA and JAVELIN.

Option parts for Hang-on Racer

Greatly suppresses vibration and instability of steering control. Increases stability during high speed cornering, acceleration and braking.

CNC machined 2mm thick carbon upper deck. Achieves increased strength and weight reduction of approximately 5g compared to normal FRP products.

Optional parts for Optima

Spare parts for the LAZER ZX7

Spare parts for FAZER RAGE 2.0

Option Parts for general-purpose

Option parts for the TURBO OPTIMA.
Soft compound of 50mm tire. For low grip road surface

Back plate for the KE21 SP / KE25SP / KE25SP2 engine. Back plate elimintes the pull start allowing the use of starter boxes. Less friction allows more performance.

■Length 460mm
■Width 323mm
■Height 197mm
■Wheelbase 274mm
■Tread (F/R) F：250mm／R：250mm
■Tires (F/R) F：φ110×70mm／R：φ110×70mm
■Gear Ratio 11.803:1
■Weight  2180g (approx.)
■R/C system   Syncro KT-231P+
■Motor TORX10E (3652 kv4000)

Optional parts for INFERNO MP10e. Battery spacer for short LiPo batteries.
It is getting popular to use the shorty LiPo batteries to 1/8 EP Buggy due to the improved performance. The battery can be changed the installing position in the battery holder to adjust a center of gravity and balance as well as making weight reduction. That are advantage to use with the shorty LiPo battery. When use the shorty battery to MP10e, it has same effect for car. It can also be used with vintage Scorpion, Beetle and Fazer series.

Option Parts for LAZER ZX-6.

95mm Shock Spring for INFERNO MP10/MP10T/MP10e/MP9. It is necessary for Buggy to use together with IFW624 HD Rear Shock Stay.

Tie-rod set for the MA-03F/MA-030. Provides four steps of toe angle setup for each narrow and wide configuration.

Option Parts for PLAZMA Lm-C

Spare Parts for RC Surfer 3.

Optional parts for the INFERNO MP9/MP10.
Allows to change the inside center differential gear ratio from 10T/20T to 12T/18T.
By changing the differential effect, improve running stability on bumpy track
Increased a setting variety.

Spare parts for the Fazer Mk2 Touring Car

Spare parts for the Fazer Mk2 Touring Car

Option parts for INFERNO MP9/MP10 series. Necessary to use together with IFW618 and IFW619 as a set. Improves the throttle feeling to change the secondary reduction ratio (43T / 13T → 42T / 12T).

Spare Part for Ultima

Spare parts for the Ultima

Spare parts for the Ultima

Spare parts for the Ultima

Spare parts for Javelin. Great option part for the Optima.

Spare parts for Javelin. Compatible with the Optima to use the Javelin roll cage body.

5600KV brushless motor for the MINI-Z sereies.

Spare parts for the MA-030EVO Chassis

Option parts for the MP10T (for Rear Shock)

Option parts for the MP10T (for Front Shock)

Pit mat with cool MINI-Z logos. 
Great for maintanance of your MINI-Z while keeping the pit table clean. 
Soft and grippy PVC material avoids small parts to fall off the table. 
Size: 24 in. x 17 in. (approx 600 x 430mm).

Spare parts for the Mini-Z AWD

Spare Parts for TURBO SCORPION

Spare Parts for TOMAHAWK

Spare Parts for TOMAHAWK

Spare Parts for SCORPION 2014

Spare Parts for OPTIMA

Option parts for the INFERNO MP9 / MP10. 
Whole set for clutch parts. Easy to purchase some necessary clutch parts when preparing the spare engine.

Option parts for Hang-on Racer

Spare Parts for TF7

Option Parts for OPTIMA

Light weight 2.5mm carbon fiber shock tower. Compared to the stock aluminum shock tower the carbon fiber shock tower is much lighter and with the same durability

Light weight 2.0mm carbon fiber side plates. 5g lighter without compromising the durability.

Light weight 2.5mm carbon fiber plate. Same durability as the stock plates but 5g lighter.

Optional parts for the TURBO OPTIMA. 
Color variation of 50mm wheel. 
When use with #OTT244M, it can be used as optional parts for the OPTIMA and JAVELIN.

Aluminum shock set for Fazer MK2 TC chassis. 
Includes 2pcs soft springs of #FAW224. 
Allows a stable damping force than plastic shocks and fine setting is available with smooth function.
Dial type of height adjustment applys for various range of road surface conditions.

Spare Parts for TURBO SCORPION

Turns：15.5Ｔ
Operating Voltage：1-3Ｓ／12.6Ｖ
RPM@7.4V：18870
KV（RPM／V）：2550
Max Current：38A
Max Power：320W
Efficiency：90％
Weight（g）：179
Motor Diameter（mm）：35.8
Motor Length（mm）：51.2
Shaft Length（mm）：15
Shaft Diameter（mm）：3.175

Tie rod set changes front toe angle of MR-03.