There are 9339 products.
Active filters
- New
- New
MZW707 Height Adjust Ball...
Optional parts for the MR-04. A ball set with three different seat thicknesses designed for the balls mounted on the lower suspension arms. The standard setup includes a 1.0mm plastic spacer, but replacing it with the 1.0mm ball from this set helps prevent the plastic spacer from being lost and also helps prevent the knuckle arms from detaching. The 0.3mm and 0.5mm balls can be combined with plastic spacers to adjust the ride height.
<Contents>
0.3mm ball with seat x 2
0.5mm ball with seat x 2
1.0mm ball with seat x 2
Price
SGD32.00
ISW203 LW Al Motor...
MP10Te high grade machined aluminum motor mount. Designed for installing long can brushless motors. It can be used with short can motors allowing the motor to be set back for adjusting weight distribution. Can be installed on the MP10e TKI2.
Price
SGD199.66
36231P SP Knife Edge Reamer...
The blade is maked 7mm,9mm,11mm,13mm and 15mm.When using please use the marking as an indicator.
Price
SGD50.00
UM569 Steel Axle Shaft...
Spare Parts for ULTIMA RB5 SP2/Option Parts for ULTIMA RB5 series
Price
SGD16.30
IFS005-816 Big Shock Spring...
Optional front springs for the MP10/MP10e. Thicker and more coil turn allowing stiffer characteristics. Best for high speed and high traction surfaces.
Price
SGD28.26
MA356 Rear Hub Carrier(MAD...
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA004R. Cannot be used with MA002. Must use together with MA353 and MA354.
Price
SGD20.19
IGW008B-05 2-Speed...
2-Speed Transmission gear unit for the Inferno GT2 series.
Price
SGD117.07
OTW136 HD Front Shock Stay...
CNC machined 3mm thick carbon shock stay. The strength is significantly improved compared to the normal FRP product
Price
SGD40.75
IGW001GM Al Front Hub...
Option Parts for INFERNO GT/GT2.
※IGW001 (Substitution parts)
Price
SGD118.17
MBW017RB Aluminum Knuckle...
Aluminum knuckles. Provides increased rigidity and better appearance.
Price
SGD57.05
40110T3 1/5 RC SURFER4...
■Length 660mm
■Width 160mm
■Height 325mm
■Weight 1,530g approx.
■Motor 550-class G14L motor with water-cooling jacket
■propeller Size D31 x P1.4 (polycarbonate)
■Maximum Speed 21km/h approx.
■Operation time 5 minutes 30 seconds approx.
＜ Kit Contents ＞
●Pre-colored surf board installed with R/C system, complete with linkages
●Complete pre-painted surfer figure
●KT-231P+2.4GHz 2ch pistol grip type transmitter
●7.2V-22HV NiMH battery
●Ni-MH battery dedicated delta peak USB charger
●Styrofoam slipway
●Spare ladder
＜ Required for Operation ＞
●AA batteries x 4 for transmitter
Price
SGD324.96
IFW631B Carbon Front Shock...
Carbon front shock tower for the MP10 / MP10 TKI2 / MP10e. Designed to use with MP10TKI2 long shocks. Light weight and durable carbon allows lower CG. The slightly more flex feel allows a different feel than the aluminum shock towers. A great setup option for various tracks
Price
SGD136.00
FAW229 HD Ring Gear 41T
Heavy duty 41T ring gear for Mad Van VE. Increased durability compared to the stock sintered ring gear. Can be installed on 34411T1/T2 and 34412T1 with the use of FA540-12 and PNGS4822.
Price
SGD36.67
IFW626 Carbon Upper Plate
Carbon front upper plate for the MP10. Carbon allows lighter weight without sacrificing durability.
Price
SGD52.97
IFW502-01 Cooling Fan...
Spare parts for the IFW602. Includes 30mm small high power cooling fan with extension cord for Inferno MP10e.
Price
SGD57.05
MA354 Diff.Housing(MAD...
Spare parts for the MAD CRUSHER / FO-XX. Updated version of MA002. Cannot be used with MA004F / MA004R. Must use together with MA353 and MA355/MA356.
Price
SGD14.26
97054-4R-B LED Light Unit...
4 light red LED light set. Connects to the Rx open slot and includes extention cords for additional light sets.
Price
SGD24.45
97054-2B LED light unit (Φ5...
A type of LED light unit that takes power from the receiver.
Lineup of 2 lights / 4 lights and clear / red. LED can be added by connecting to the attached connector.
Price
SGD16.30
IFW623 HD Front Shock...
Optional parts for INFERNO MP10. Front Shock Stay for IF484 MS Shock set.
Changed the existing shock mounting hole position to upper side.
Allows a longer shock travel than standard, which improves the performance when landing of jumps and bumpy section.
Price
SGD101.87
40211T2 WAVE CHOPPER 2.0...
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
Price
SGD365.71
40211T1 WAVE CHOPPER 2.0...
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
Price
SGD365.71